lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 28 Jul 2014 20:18:02 +0900
From:	Chanwoo Choi <>
To:	Arnd Bergmann <>
Subject: Re: [PATCH 2/2] iio: adc: exynos_adc: Add support for S3C24xx ADC

On 07/22/2014 09:59 PM, Arnd Bergmann wrote:
> On Tuesday 22 July 2014 11:11:14 Chanwoo Choi wrote:
>> This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
>> is alomost same as ADCv1. But, There are a little difference as following:
>> - ADCMUX register address to select channel
>> - ADCDAT mask (10bit or 12bit ADC resolution according to SoC version)
>> Signed-off-by: Chanwoo Choi <>
>> Signed-off-by: Arnd Bergmann <>
> While looking at the driver again to see if the touchscreen patch needs
> an update for this, I noticed that the s3c24xx variants don't have the
> ADC_V1_INTCLR and ADC_V1_CLRINTPNDNUP registers, so I assume your patch
> will have to be updated not to acknowledge the interrupts.
> It's possible that writing to the missing registers is harmless though and
> that you don't need that change.

OK, I'll remove the function pointer of clear_irq for s3c24xx.

Best Regards,
Chanwoo Choi

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

Powered by blists - more mailing lists