early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.16.0-rc1-00010-gbd14ddc (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Tue Jul 29 21:23:40 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa1-07291824/linux-devel:devel-hourly-2014072909:bd14ddc45614b61210fdf0ee4e94152948dd9d5e:bisect-linux-3/.vmlinuz-bd14ddc45614b61210fdf0ee4e94152948dd9d5e-20140729212442-16-lkp-nex05 branch=linux-devel/devel-hourly-2014072909 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x03454000, 0x03454fff] PGTABLE [ 0.000000] BRK [0x03455000, 0x03455fff] PGTABLE [ 0.000000] BRK [0x03456000, 0x03456fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13ffdfff] [ 0.000000] [mem 0x12800000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x03457000, 0x03457fff] PGTABLE [ 0.000000] cma: CMA: reserved 16 MiB at 11800000 [ 0.000000] RAMDISK: [mem 0x1293d000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0D00 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FFFC2A 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FFF1C0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FFE040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FFE000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FFF234 00093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FFFB72 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FFFBF2 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13ffdfff] [ 0.000000] NODE_DATA [mem 0x13ff9000-0x13ffdfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ff8001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880010a00000-ffff880010ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880011600000 s73792 r8192 d24512 u1048576 [ 0.000000] pcpu-alloc: s73792 r8192 d24512 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1160cf00 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa1-07291824/linux-devel:devel-hourly-2014072909:bd14ddc45614b61210fdf0ee4e94152948dd9d5e:bisect-linux-3/.vmlinuz-bd14ddc45614b61210fdf0ee4e94152948dd9d5e-20140729212442-16-lkp-nex05 branch=linux-devel/devel-hourly-2014072909 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 243912K/327280K available (16344K kernel code, 4935K rwdata, 4264K rodata, 1124K init, 6520K bss, 83368K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.16.0-rc1-00010-gbd14ddc (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Tue Jul 29 21:23:40 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa1-07291824/linux-devel:devel-hourly-2014072909:bd14ddc45614b61210fdf0ee4e94152948dd9d5e:bisect-linux-3/.vmlinuz-bd14ddc45614b61210fdf0ee4e94152948dd9d5e-20140729212442-16-lkp-nex05 branch=linux-devel/devel-hourly-2014072909 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x03454000, 0x03454fff] PGTABLE [ 0.000000] BRK [0x03455000, 0x03455fff] PGTABLE [ 0.000000] BRK [0x03456000, 0x03456fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13ffdfff] [ 0.000000] [mem 0x12800000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x03457000, 0x03457fff] PGTABLE [ 0.000000] cma: CMA: reserved 16 MiB at 11800000 [ 0.000000] RAMDISK: [mem 0x1293d000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0D00 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FFFC2A 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FFF1C0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FFE040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FFE000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FFF234 00093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FFFB72 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FFFBF2 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13ffdfff] [ 0.000000] NODE_DATA [mem 0x13ff9000-0x13ffdfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ff8001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880010a00000-ffff880010ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880011600000 s73792 r8192 d24512 u1048576 [ 0.000000] pcpu-alloc: s73792 r8192 d24512 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1160cf00 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa1-07291824/linux-devel:devel-hourly-2014072909:bd14ddc45614b61210fdf0ee4e94152948dd9d5e:bisect-linux-3/.vmlinuz-bd14ddc45614b61210fdf0ee4e94152948dd9d5e-20140729212442-16-lkp-nex05 branch=linux-devel/devel-hourly-2014072909 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 243912K/327280K available (16344K kernel code, 4935K rwdata, 4264K rodata, 1124K init, 6520K bss, 83368K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 1994.997 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 3989.99 BogoMIPS (lpj=1994997) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.005058] ACPI: Core revision 20140424 [ 0.033412] ACPI: All ACPI Tables successfully acquired [ 0.035256] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.036391] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.037198] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.038025] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.041159] Initializing cgroup subsys net_cls [ 0.042032] Initializing cgroup subsys blkio [ 0.043025] Initializing cgroup subsys debug [ 0.044197] mce: CPU supports 10 MCE banks [ 0.046064] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.046064] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.046064] tlb_flushall_shift: 6 [ 0.048126] Freeing SMP alternatives memory: 36K (ffffffff82dec000 - ffffffff82df5000) [ 0.056202] Getting VERSION: 1050014 [ 0.057021] Getting VERSION: 1050014 [ 0.058019] Getting ID: 0 [ 0.059032] Getting ID: ff000000 [ 0.060027] Getting LVT0: 8700 [ 0.061016] Getting LVT1: 8400 [ 0.062128] enabled ExtINT on CPU#0 [ 0.065457] ENABLING IO-APIC IRQs [ 0.066016] init IO_APIC IRQs [ 0.067010] apic 0 pin 0 not connected [ 0.068029] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.069048] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.070060] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.071047] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.072042] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.073044] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.074044] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.075053] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.076042] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.077042] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.078044] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.079041] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.080047] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.081043] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.082042] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.083038] apic 0 pin 16 not connected [ 0.084007] apic 0 pin 17 not connected [ 0.085007] apic 0 pin 18 not connected [ 0.086007] apic 0 pin 19 not connected [ 0.087006] apic 0 pin 20 not connected [ 0.088006] apic 0 pin 21 not connected [ 0.089006] apic 0 pin 22 not connected [ 0.090007] apic 0 pin 23 not connected [ 0.091265] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092006] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.096006] Using local APIC timer interrupts. [ 0.096006] calibrating APIC timer ... [ 0.098000] ... lapic delta = 6249661 [ 0.098000] ... PM-Timer delta = 357934 [ 0.098000] ... PM-Timer result ok [ 0.098000] ..... delta 6249661 [ 0.098000] ..... mult: 268420896 [ 0.098000] ..... calibration result: 999945 [ 0.098000] ..... CPU clock speed is 1994.0819 MHz. [ 0.098000] ..... host bus clock speed is 999.0945 MHz. [ 0.098193] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.105076] x86: Booting SMP configuration: [ 0.106022] .... node #0, CPUs: #1 [ 0.104637] kvm-clock: cpu 1, msr 0:13ff8041, secondary cpu clock [ 0.104637] masked ExtINT on CPU#1 [ 0.122192] x86: Booted up 1 node, 2 CPUs [ 0.123018] smpboot: Total of 2 processors activated (7979.98 BogoMIPS) [ 0.123045] KVM setup async PF for cpu 1 [ 0.123059] kvm-stealtime: cpu 1, msr 1170cf00 [ 0.128020] devtmpfs: initialized [ 0.130768] gcov: version magic: 0x3430382a [ 0.134211] xor: measuring software checksum speed [ 0.145039] prefetch64-sse: 6060.000 MB/sec [ 0.156017] generic_sse: 5280.000 MB/sec [ 0.157010] xor: using function: prefetch64-sse (6060.000 MB/sec) [ 0.158042] prandom: seed boundary self test passed [ 0.161370] prandom: 100 self tests passed [ 0.162709] regulator-dummy: no parameters [ 0.164129] NET: Registered protocol family 16 [ 0.166818] cpuidle: using governor ladder [ 0.167018] cpuidle: using governor menu [ 0.169136] ACPI: bus type PCI registered [ 0.171005] PCI: Using configuration type 1 for base access [ 0.173203] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.174005] mtrr: your CPUs had inconsistent MTRRdefType settings [ 0.175005] mtrr: probably your BIOS does not setup all CPUs. [ 0.176005] mtrr: corrected configuration. [ 0.226090] raid6: sse2x1 757 MB/s [ 0.244021] raid6: sse2x2 937 MB/s [ 0.262053] raid6: sse2x4 929 MB/s [ 0.263009] raid6: using algorithm sse2x2 (937 MB/s) [ 0.264008] raid6: using intx1 recovery algorithm [ 0.268025] ACPI: Added _OSI(Module Device) [ 0.269008] ACPI: Added _OSI(Processor Device) [ 0.270007] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.272008] ACPI: Added _OSI(Processor Aggregator Device) [ 0.296461] ACPI: Interpreter enabled [ 0.297058] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.300026] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.303060] ACPI: (supports S0 S3 S5) [ 0.304008] ACPI: Using IOAPIC for interrupt routing [ 0.305167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.336039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.337047] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.339051] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.342250] PCI host bridge to bus 0000:00 [ 0.343014] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.344016] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.345014] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 0.346017] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 0.347017] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 0.348015] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 0.349019] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.350015] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 0.351115] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.353846] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.356309] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.362011] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.365056] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.366009] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.367011] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.368009] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.370850] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.372083] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.373031] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.375161] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.378022] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.381020] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.392032] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.395210] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.398014] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.402010] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.414000] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.417553] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.419010] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.435155] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.440190] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.446036] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.452132] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.456435] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.463000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.464396] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.465008] vgaarb: loaded [ 0.466007] vgaarb: bridge control possible 0000:00:02.0 [ 0.470503] SCSI subsystem initialized [ 0.471133] libata version 3.00 loaded. [ 0.472602] pps_core: LinuxPPS API ver. 1 registered [ 0.473007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.474070] PTP clock support registered [ 0.476167] PCI: Using ACPI for IRQ routing [ 0.477010] PCI: pci_cache_line_size set to 64 bytes [ 0.478259] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.479030] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.481444] Bluetooth: Core ver 2.19 [ 0.482069] NET: Registered protocol family 31 [ 0.483006] Bluetooth: HCI device and connection manager initialized [ 0.484029] Bluetooth: HCI socket layer initialized [ 0.485020] Bluetooth: L2CAP socket layer initialized [ 0.486061] Bluetooth: SCO socket layer initialized [ 0.487031] NET: Registered protocol family 8 [ 0.488007] NET: Registered protocol family 20 [ 0.492531] Switched to clocksource kvm-clock [ 0.495401] pnp: PnP ACPI init [ 0.496919] ACPI: bus type PNP registered [ 0.498789] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.508625] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.524318] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.527716] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.530317] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.533671] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.536369] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.539656] pnp 00:03: [dma 2] [ 0.541209] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.543900] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.547256] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.549937] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.553340] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.557964] pnp: PnP ACPI: found 6 devices [ 0.559659] ACPI: bus type PNP unregistered [ 0.585260] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.587400] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 0.589668] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 0.591972] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 0.594092] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 0.596232] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 0.598291] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 0.600387] NET: Registered protocol family 1 [ 0.601960] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.603898] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.605796] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.607759] pci 0000:00:02.0: Boot video device [ 0.609479] PCI: CLS 0 bytes, default 64 [ 0.619527] Trying to unpack rootfs image as initramfs... [ 2.360489] Freeing initrd memory: 23244K (ffff88001293d000 - ffff880013ff0000) [ 2.377624] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 2.381314] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable. [ 2.383820] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 2.390327] AVX or AES-NI instructions are not detected. [ 2.392693] AVX instructions are not detected. [ 2.394865] AVX instructions are not detected. [ 2.396934] AVX2 or AES-NI instructions are not detected. [ 2.400518] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2.403289] Initialise system trusted keyring [ 3.370397] tsc: Refined TSC clocksource calibration: 1994.996 MHz [ 3.651229] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.678931] VFS: Disk quotas dquot_6.5.2 [ 3.680865] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.689743] QNX4 filesystem 0.2.3 registered. [ 3.692383] JFS: nTxBlock = 2215, nTxLock = 17723 [ 3.708424] msgmni has been set to 553 [ 3.715030] NET: Registered protocol family 38 [ 3.716840] Key type asymmetric registered [ 3.718707] Asymmetric key parser 'x509' registered [ 3.720736] bounce: pool size: 64 pages [ 3.722894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.735120] io scheduler noop registered (default) [ 3.736957] test_string_helpers: Running tests... [ 3.741711] hgafb: HGA card not detected. [ 3.743451] hgafb: probe of hgafb.0 failed with error -22 [ 3.761511] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.764116] ACPI: Power Button [PWRF] [ 3.942802] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.998094] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.015605] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 4.017740] ac.o: No PCI boards found. [ 4.019116] ac.o: For an ISA board you must supply memory and irq parameters. [ 4.021518] Non-volatile memory driver v1.3 [ 4.029999] ppdev: user-space parallel port driver [ 4.031789] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 4.037156] Linux agpgart interface v0.103 [ 4.039398] [drm] Initialized drm 1.1.0 20060810 [ 4.041272] [drm] radeon kernel modesetting enabled. [ 4.043398] drm/i810 does not support SMP [ 4.070340] brd: module loaded [ 4.084262] loop: module loaded [ 4.085794] mtip32xx Version 1.3.1 [ 4.087870] nullb0: unknown partition table [ 4.090306] nullb1: unknown partition table [ 4.092163] null: module loaded [ 4.093966] Guest personality initialized and is inactive [ 4.096252] VMCI host device registered (name=vmci, major=10, minor=62) [ 4.098243] Initialized host personality [ 4.100866] Loading iSCSI transport class v2.0-870. [ 4.112334] alua: device handler registered [ 4.119468] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 4.123309] mpt2sas version 16.100.00.00 loaded [ 4.125863] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 4.128353] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 4.131952] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013) [ 4.134600] iscsi: registered transport (bnx2i) [ 4.141201] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 4.147318] arcnet loaded. [ 4.148860] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 4.151968] E-mail me if you actually test this driver, please! [ 4.154298] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 4.158050] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 4.160199] Copyright (c) 2007 Atheros Corporation. [ 4.162590] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 4.175319] sky2: driver version 1.30 [ 4.177392] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.60 [ 4.180463] PPP generic driver version 2.4.2 [ 4.182575] PPP BSD Compression module registered [ 4.184495] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 4.188645] hdlc: HDLC support module revision 1.22 [ 4.191121] adummy: version 1.0 [ 4.193081] Fusion MPT base driver 3.04.20 [ 4.194863] Copyright (c) 1999-2008 LSI Corporation [ 4.196938] Fusion MPT SPI Host driver 3.04.20 [ 4.198949] Fusion MPT misc device (ioctl) driver 3.04.20 [ 4.201401] mptctl: Registered with Fusion MPT base driver [ 4.203602] mptctl: /dev/mptctl @ (major,minor=10,220) [ 4.210983] aoe: AoE v85 initialised. [ 4.215941] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.220909] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.222997] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.226695] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 4.243191] sdhci: Secure Digital Host Controller Interface driver [ 4.248622] sdhci: Copyright(c) Pierre Ossman [ 4.253492] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 4.259028] wbsd: Copyright(c) Pierre Ossman [ 4.263211] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.288144] panel: driver version 0.9.5 not yet registered [ 4.294493] cxt1e1: No boards found [ 4.298530] input: Speakup as /devices/virtual/input/input3 [ 4.308910] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 4.316654] speakup 3.1.6: initialized [ 4.320528] synth name on entry is: (null) [ 4.328112] ashmem: initialized [ 4.329697] logger: created 256K log 'log_main' [ 4.331919] logger: created 256K log 'log_events' [ 4.333978] logger: created 256K log 'log_radio' [ 4.336038] logger: created 256K log 'log_system' [ 4.338272] FPGA DOWNLOAD ---> [ 4.339596] FPGA image file name: xlinx_fpga_firmware.bit [ 4.341864] GPIO INIT FAIL!! [ 4.345972] intel_rapl: driver does not support CPU family 15 model 6 [ 4.350425] oprofile: using NMI interrupt. [ 4.354180] NET: Registered protocol family 15 [ 4.358634] NET: Registered protocol family 4 [ 4.362734] NET: Registered protocol family 5 [ 4.367259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.371376] Bluetooth: BNEP filters: protocol multicast [ 4.375403] Bluetooth: BNEP socket layer initialized [ 4.379325] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.383552] Bluetooth: HIDP socket layer initialized [ 4.396996] lec:lane_module_init: lec.c: initialized [ 4.399980] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 4.409950] DECnet: Routing cache hash table of 1024 buckets, 16Kbytes [ 4.412484] NET: Registered protocol family 12 [ 4.414448] 9pnet: Installing 9P2000 support [ 4.423508] NET: Registered protocol family 36 [ 4.428651] batman_adv: B.A.T.M.A.N. advanced 2014.3.0 (compatibility version 15) loaded [ 4.435888] mpls_gso: MPLS GSO support [ 4.438649] [ 4.438649] printing PIC contents [ 4.440719] ... PIC IMR: ffff [ 4.441693] ... PIC IRR: 1013 [ 4.443317] ... PIC ISR: 0000 [ 4.444590] ... PIC ELCR: 0c00 [ 4.453199] printing local APIC contents on CPU#0/0: [ 4.454183] ... APIC ID: 00000000 (0) [ 4.454183] ... APIC VERSION: 01050014 [ 4.454183] ... APIC TASKPRI: 00000000 (00) [ 4.454183] ... APIC PROCPRI: 00000000 [ 4.454183] ... APIC LDR: 01000000 [ 4.454183] ... APIC DFR: ffffffff [ 4.454183] ... APIC SPIV: 000001ff [ 4.454183] ... APIC ISR field: [ 4.454183] 0000000000000000000000000000000000000000000000000000000000000000 [ 4.454183] ... APIC TMR field: [ 4.454183] 0000000002000000000000000000000000000000000000000000000000000000 [ 4.454183] ... APIC IRR field: [ 4.454183] 0000000000000000000000000000000000000000000000000000000000000000 [ 4.454183] ... APIC ESR: 00000000 [ 4.454183] ... APIC ICR: 000008fd [ 4.454183] ... APIC ICR2: 02000000 [ 4.454183] ... APIC LVTT: 000000ef [ 4.454183] ... APIC LVTPC: 00010000 [ 4.454183] ... APIC LVT0: 00010700 [ 4.454183] ... APIC LVT1: 00000400 [ 4.454183] ... APIC LVTERR: 000000fe [ 4.454183] ... APIC TMICT: 01a94235 [ 4.454183] ... APIC TMCCT: 0157779b [ 4.454183] ... APIC TDCR: 00000003 [ 4.454183] [ 4.533011] number of MP IRQ sources: 15. [ 4.534818] number of IO-APIC #0 registers: 24. [ 4.536740] testing the IO APIC....................... [ 4.538918] IO APIC #0...... [ 4.540306] .... register #00: 00000000 [ 4.542056] ....... : physical APIC id: 00 [ 4.543962] ....... : Delivery Type: 0 [ 4.545693] ....... : LTS : 0 [ 4.547449] .... register #01: 00170011 [ 4.549266] ....... : max redirection entries: 17 [ 4.551369] ....... : PRQ implemented: 0 [ 4.553202] ....... : IO APIC version: 11 [ 4.555059] .... register #02: 00000000 [ 4.556722] ....... : arbitration: 00 [ 4.558471] .... IRQ redirection table: [ 4.560138] 1 0 0 0 0 0 0 00 [ 4.562031] 0 0 0 0 0 1 1 31 [ 4.563927] 0 0 0 0 0 1 1 30 [ 4.565762] 0 0 0 0 0 1 1 33 [ 4.567526] 1 0 0 0 0 1 1 34 [ 4.569210] 1 1 0 0 0 1 1 35 [ 4.570920] 0 0 0 0 0 1 1 36 [ 4.572490] 0 0 0 0 0 1 1 37 [ 4.574180] 0 0 0 0 0 1 1 38 [ 4.576220] 0 1 0 0 0 1 1 39 [ 4.578135] 1 1 0 0 0 1 1 3A [ 4.579820] 1 1 0 0 0 1 1 3B [ 4.581650] 0 0 0 0 0 1 1 3C [ 4.583607] 0 0 0 0 0 1 1 3D [ 4.585739] 0 0 0 0 0 1 1 3E [ 4.587642] 0 0 0 0 0 1 1 3F [ 4.589559] 1 0 0 0 0 0 0 00 [ 4.591524] 1 0 0 0 0 0 0 00 [ 4.593380] 1 0 0 0 0 0 0 00 [ 4.595320] 1 0 0 0 0 0 0 00 [ 4.597256] 1 0 0 0 0 0 0 00 [ 4.599195] 1 0 0 0 0 0 0 00 [ 4.601367] 1 0 0 0 0 0 0 00 [ 4.603600] 1 0 0 0 0 0 0 00 [ 4.605813] IRQ to pin mappings: [ 4.607259] IRQ0 -> 0:2 [ 4.609034] IRQ1 -> 0:1 [ 4.610869] IRQ3 -> 0:3 [ 4.612718] IRQ4 -> 0:4 [ 4.614592] IRQ5 -> 0:5 [ 4.616408] IRQ6 -> 0:6 [ 4.618218] IRQ7 -> 0:7 [ 4.620073] IRQ8 -> 0:8 [ 4.621672] IRQ9 -> 0:9 [ 4.623210] IRQ10 -> 0:10 [ 4.624709] IRQ11 -> 0:11 [ 4.626484] IRQ12 -> 0:12 [ 4.628095] IRQ13 -> 0:13 [ 4.629738] IRQ14 -> 0:14 [ 4.631653] IRQ15 -> 0:15 [ 4.633654] .................................... done. [ 4.636895] Loading compiled-in X.509 certificates [ 4.642322] Loaded X.509 cert 'Magrathea: Glacier signing key: de0e73dcd1d4fb71cabd58b0275980997a5773be' [ 4.660278] Btrfs loaded, assert=on, integrity-checker=on [ 4.670234] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 4.680123] Freeing unused kernel memory: 1124K (ffffffff82cd3000 - ffffffff82dec000) [ 4.683295] Write protecting the kernel read-only data: 24576k [ 4.702913] Freeing unused kernel memory: 2000K (ffff88000200c000 - ffff880002200000) [ 4.730428] Freeing unused kernel memory: 1880K (ffff88000262a000 - ffff880002800000) [ 4.770934] random: init urandom read with 6 bits of entropy available [ 4.793994] BUG: sleeping function called from invalid context at kernel/rcu/update.c:871 [ 4.802080] in_atomic(): 1, irqs_disabled(): 0, pid: 94, name: hostname [ 4.808864] CPU: 0 PID: 94 Comm: hostname Not tainted 3.16.0-rc1-00010-gbd14ddc #1 [ 4.814520] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 4.821278] ffff88000f2acac0 ffff88001322fe88 ffffffff81fdcc15 ffff88000f2acad0 [ 4.829295] ffff88001322fe98 ffffffff810cc549 ffff88001322feb0 ffffffff811099f9 [ 4.837254] ffff88000f2ad0d8 ffff88001322fec0 ffffffff81110a01 ffff88001322ff38 [ 4.845685] Call Trace: [ 4.849022] [] dump_stack+0x85/0xba [ 4.853129] [] __might_sleep+0x129/0x180 [ 4.857319] [] exit_rcu_tasks+0x29/0xa0 [ 4.861615] [] exit_rcu+0x11/0x20 [ 4.865672] [] do_exit+0xa05/0xfc0 [ 4.870864] [] do_group_exit+0x46/0x130 [ 4.875191] [] SyS_exit_group+0x17/0x20 [ 4.878693] [] system_call_fastpath+0x16/0x1b [ 5.081134] init: Failed to create pty - disabling logging for job [ 5.083491] init: Temporary process spawn error: No such file or directory [ 5.112668] init: Failed to create pty - disabling logging for job [ 5.116411] init: Temporary process spawn error: No such file or directory [ 5.218761] init: Failed to create pty - disabling logging for job [ 5.220984] init: Temporary process spawn error: No such file or directory [ 5.227731] init: Failed to create pty - disabling logging for job [ 5.230430] init: Temporary process spawn error: No such file or directory [ 5.365865] init: Failed to create pty - disabling logging for job [ 5.368282] init: Temporary process spawn error: No such file or directory [ 5.381860] init: Failed to create pty - disabling logging for job [ 5.397554] init: Failed to create pty - disabling logging for job [ 5.407596] init: Failed to create pty - disabling logging for job [ 5.420115] init: Failed to create pty - disabling logging for job [ 5.439304] init: Failed to create pty - disabling logging for job [ 5.455575] init: Failed to create pty - disabling logging for job [ 5.463590] init: Failed to create pty - disabling logging for job [ 5.847252] BUG: sleeping function called from invalid context at kernel/rcu/update.c:871 [ 5.847254] in_atomic(): 1, irqs_disabled(): 0, pid: 223, name: blkid [ 6.233627] init: Failed to create pty - disabling logging for job [ 6.252822] init: Failed to create pty - disabling logging for job [ 6.408431] init: Failed to create pty - disabling logging for job [ 6.449882] init: Failed to create pty - disabling logging for job [ 6.850709] BUG: sleeping function called from invalid context at kernel/rcu/update.c:871 [ 6.867929] in_atomic(): 1, irqs_disabled(): 0, pid: 336, name: dd [ 6.955156] init: Failed to create pty - disabling logging for job [ 6.984268] init: Failed to create pty - disabling logging for job [ 7.018709] init: Failed to create pty - disabling logging for job [ 7.025327] init: Failed to create pty - disabling logging for job [ 7.049876] init: Failed to create pty - disabling logging for job Kernel tests: Boot OK! [ 7.477133] init: Failed to create pty - disabling logging for job [ 7.510609] init: Failed to create pty - disabling logging for job [ 7.528460] init: Failed to create pty - disabling logging for job [ 7.563764] init: Failed to create pty - disabling logging for job Elapsed time: 15 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa1-07291824/linux-devel:devel-hourly-2014072909:bd14ddc45614b61210fdf0ee4e94152948dd9d5e:bisect-linux-3/.vmlinuz-bd14ddc45614b61210fdf0ee4e94152948dd9d5e-20140729212442-16-lkp-nex05 branch=linux-devel/devel-hourly-2014072909 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa1-07291824/bd14ddc45614b61210fdf0ee4e94152948dd9d5e/vmlinuz-3.16.0-rc1-00010-gbd14ddc drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-lkp-nex05-169 -serial file:/dev/shm/kboot/serial-quantal-lkp-nex05-169 -daemonize -display none -monitor null