linux-kernel - Re: [PATCH v2 2/2] usb: dwc2: add dr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 31 Jul 2014 16:07:13 +0900
From:	Jingoo Han <jg1.han@...sung.com>
To:	'Kever Yang' <kever.yang@...k-chips.com>
Cc:	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	rdunlap@...radead.org, paulz@...opsys.com,
	gregkh@...uxfoundation.org, mporter@...aro.org, kishon@...com,
	heiko@...ech.de, swarren@...dotorg.org, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
	addy.ke@...k-chips.com, xjq@...k-chips.com, cf@...k-chips.com,
	lyz@...k-chips.com, wulf@...k-chips.com, dianders@...omium.org,
	olof@...om.net, sonnyrao@...omium.org,
	'Jingoo Han' <jg1.han@...sung.com>
Subject: Re: [PATCH v2 2/2] usb: dwc2: add dr_mode support for dwc2

On Thursday, July 31, 2014 10:06 AM, Kever Yang wrote:
> 
> Some devices with A female host port and without use of usb_id pin
> will need this for the otg controller works as device role
> during firmware period and works as host role in rich os.

Hi Kever Yang,

This commit message looks too specific. Please make it more
general, as the commit "usb: dwc3: set 'mode' based on
selected Kconfig choices".

Then, maybe, you can add this specific case.
"According to the "dr_mode", the otg controller can work as
device role during firmware period, and work as host role in
the kernel, without use of usb_id pin."

Best regards,
Jingoo Han

> 
> Signed-off-by: Kever Yang <kever.yang@...k-chips.com>
> 
> ---
> 
> Changes in v2:
> - put spaces around '+' operator
> - expand the comment for dr_mode
> - handle dr_mode is USB_DR_MODE_OTG
> 
>  drivers/usb/dwc2/core.c     |   18 ++++++++++++++++++
>  drivers/usb/dwc2/core.h     |    5 +++++
>  drivers/usb/dwc2/platform.c |    4 ++++
>  3 files changed, 27 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 27d2c9b..738bec2 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -118,6 +118,7 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
>  {
>  	u32 greset;
>  	int count = 0;
> +	u32 gusbcfg;
> 
>  	dev_vdbg(hsotg->dev, "%s()\n", __func__);
> 
> @@ -148,6 +149,23 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
>  		}
>  	} while (greset & GRSTCTL_CSFTRST);
> 
> +	if (hsotg->dr_mode == USB_DR_MODE_HOST) {
> +		gusbcfg = readl(hsotg->regs + GUSBCFG);
> +		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
> +		gusbcfg |= GUSBCFG_FORCEHOSTMODE;
> +		writel(gusbcfg, hsotg->regs + GUSBCFG);
> +	} else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
> +		gusbcfg = readl(hsotg->regs + GUSBCFG);
> +		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
> +		gusbcfg |= GUSBCFG_FORCEDEVMODE;
> +		writel(gusbcfg, hsotg->regs + GUSBCFG);
> +	} else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
> +		gusbcfg = readl(hsotg->regs + GUSBCFG);
> +		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
> +		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
> +		writel(gusbcfg, hsotg->regs + GUSBCFG);
> +	}
> +
>  	/*
>  	 * NOTE: This long sleep is _very_ important, otherwise the core will
>  	 * not stay in host mode after a connector ID change!
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 1efd10c..a34681c 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -501,6 +501,10 @@ struct dwc2_hw_params {
>   *                      a_peripheral and b_device=>b_host) this may not match
>   *                      the core, but allows the software to determine
>   *                      transitions
> + * @dr_mode:            Requested mode of operation, one of following:
> + *                      - USB_DR_MODE_PERIPHERAL
> + *                      - USB_DR_MODE_HOST
> + *                      - USB_DR_MODE_OTG
>   * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
>   *                      transfer are in process of being queued
>   * @srp_success:        Stores status of SRP request in the case of a FS PHY
> @@ -592,6 +596,7 @@ struct dwc2_hsotg {
>  	/** Params to actually use */
>  	struct dwc2_core_params *core_params;
>  	enum usb_otg_state op_state;
> +	enum usb_dr_mode        dr_mode;
> 
>  	unsigned int queuing_high_bandwidth:1;
>  	unsigned int srp_success:1;
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index b14668b..669a03a 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -42,6 +42,8 @@
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> 
> +#include <linux/usb/of.h>
> +
>  #include "core.h"
>  #include "hcd.h"
> 
> @@ -200,6 +202,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
>  	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
>  		(unsigned long)res->start, hsotg->regs);
> 
> +	hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
> +
>  	retval = dwc2_hcd_init(hsotg, irq, params);
>  	if (retval)
>  		return retval;
> --
> 1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/