| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1406940750-15880-5-git-send-email-afaerber@suse.de>
Date: Sat, 2 Aug 2014 02:52:24 +0200
From: Andreas Färber <afaerber@...e.de>
To: linux-samsung-soc@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Stephan van Schaik <stephan@...khronix.com>,
Vincent Palatin <vpalatin@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Tomasz Figa <t.figa@...sung.com>,
Andreas Färber <afaerber@...e.de>,
Ben Dooks <ben-linux@...ff.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
Use the new style of referencing inherited nodes and use symbolic names.
Reorder one pinctrl node in GPIO order.
Goal is the alignment of all exynos5250 based device trees for comparison.
Suggested-by: Doug Anderson <dianders@...omium.org>
Reviewed-by: Doug Anderson <dianders@...omium.org>
Signed-off-by: Andreas Färber <afaerber@...e.de>
---
v5 -> v6:
* Split off label additions (Doug Anderson)
* Fixed alphabetical order of sd3_* nodes (Doug Anderson)
v4 -> v5:
* Introduced labels to consistently use new referencing style (Tomasz Figa)
* Use IRQ_TYPE_* constants
* Use some more GPIO_ACTIVE_*
v3 -> v4: Unchanged
v3: New (Doug Anderson)
arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
1 file changed, 145 insertions(+), 146 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1c36cd72905f..40cad43f8a11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,9 +6,12 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -26,89 +29,19 @@
chosen {
};
- rtc@...E0000 {
- status = "okay";
- };
-
- pinctrl@...00000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@...00000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -129,8 +62,8 @@
i2c-parent = <&{/i2c@...A0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -153,7 +86,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -239,19 +172,6 @@
};
};
- i2c@...D0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
- };
-
- i2s0: i2s@...30000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -265,20 +185,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@...00000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@...10000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -286,19 +198,7 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
@@ -306,42 +206,58 @@
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
+};
- fimd@...00000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
- dp-controller@...B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
};
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
@@ -350,7 +266,7 @@
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -500,7 +416,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -547,6 +463,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -560,6 +483,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -592,7 +519,7 @@
slot@0 {
reg = <0>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
};
};
@@ -619,12 +546,80 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -633,4 +628,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists