[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1406940750-15880-10-git-send-email-afaerber@suse.de>
Date: Sat, 2 Aug 2014 02:52:29 +0200
From: Andreas Färber <afaerber@...e.de>
To: linux-samsung-soc@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Stephan van Schaik <stephan@...khronix.com>,
Vincent Palatin <vpalatin@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Tomasz Figa <t.figa@...sung.com>,
Andreas Färber <afaerber@...e.de>,
Ben Dooks <ben-linux@...ff.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v6 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.
Reported-by: Tomasz Figa <t.figa@...sung.com>
Reviewed-by: Tomasz Figa <t.figa@...sung.com>
Signed-off-by: Andreas Färber <afaerber@...e.de>
---
v5 -> v6: Unchanged
v5: New
Aligns with Spring's new USB3503 node.
arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cc8b9ffeecc1..b231bcff7403 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists