| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <41705e1e4c604240ba96333a03d5c544@BLUPR03MB373.namprd03.prod.outlook.com>
Date: Wed, 6 Aug 2014 02:33:17 +0000
From: "fugang.duan@...escale.com" <fugang.duan@...escale.com>
To: Yao Yuan <yao.yuan@...escale.com>,
"wsa@...-dreams.de" <wsa@...-dreams.de>,
"marex@...x.de" <marex@...x.de>
CC: "LW@...O-electronics.de" <LW@...O-electronics.de>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawn.guo@...aro.org" <shawn.guo@...aro.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"Frank.Li@...escale.com" <Frank.Li@...escale.com>
Subject: RE: [PATCH v6 1/2] i2c: imx: add DMA support for freescale i2c driver
From: Yuan Yao<yao.yuan@...escale.com> Data: Tuesday, August 05, 2014 5:56 PM
>To: wsa@...-dreams.de; marex@...x.de
>Cc: LW@...O-electronics.de; mark.rutland@....com; shawn.guo@...aro.org;
>linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
>i2c@...r.kernel.org
>Subject: [PATCH v6 1/2] i2c: imx: add DMA support for freescale i2c driver
>
>Add dma support for i2c. This function depend on DMA driver.
>You can turn on it by write both the dmas and dma-name properties in dts
>node.
>DMA is optional, even DMA request unsuccessfully, i2c can also work well.
>
>Signed-off-by: Yuan Yao <yao.yuan@...escale.com>
>---
> drivers/i2c/busses/i2c-imx.c | 341
>+++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 331 insertions(+), 10 deletions(-)
>
>diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
>index aa8bc14..60ea946 100644
>--- a/drivers/i2c/busses/i2c-imx.c
>+++ b/drivers/i2c/busses/i2c-imx.c
>@@ -37,22 +37,27 @@
> /** Includes
>*******************************************************************
>
>**************************************************************************
>*****/
[...]
>+/* Functions for DMA support */
>+static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
>+ dma_addr_t phy_addr)
>+{
>+ struct imx_i2c_dma *dma;
>+ struct dma_slave_config dma_sconfig;
>+ struct device *dev = &i2c_imx->adapter.dev;
>+ int ret;
>+
>+ dma = devm_kzalloc(dev, sizeof(struct imx_i2c_dma), GFP_KERNEL);
>+ if (!dma)
>+ return -ENOMEM;
>+
>+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
>+ if (!dma->chan_tx) {
>+ dev_dbg(dev, "can't request DMA tx channel\n");
>+ ret = -ENODEV;
>+ goto fail_al;
>+ }
>+
>+ dma_sconfig.dst_addr = phy_addr +
>+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
>+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
>+ dma_sconfig.dst_maxburst = 1;
The maxburst is 1 cause very slow efficiency for DMA copy, which system performance even is slower
Than cpu mode.
>+ dma_sconfig.direction = DMA_MEM_TO_DEV;
>+ ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
>+ if (ret < 0) {
>+ dev_dbg(dev, "can't configure tx channel\n");
>+ goto fail_tx;
>+ }
>+
>+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
>+ if (!dma->chan_rx) {
>+ dev_dbg(dev, "can't request DMA rx channel\n");
>+ ret = -ENODEV;
>+ goto fail_tx;
>+ }
>+
>+ dma_sconfig.src_addr = phy_addr +
>+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
>+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
>+ dma_sconfig.src_maxburst = 1;
As above.
>+ dma_sconfig.direction = DMA_DEV_TO_MEM;
>+ ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
>+ if (ret < 0) {
>+ dev_dbg(dev, "can't configure rx channel\n");
>+ goto fail_rx;
>+ }
>+
>+ i2c_imx->dma = dma;
>+ init_completion(&dma->cmd_complete);
>+ dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
>+ dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
>+
>+ return 0;
>+
>+fail_rx:
>+ dma_release_channel(dma->chan_rx);
>+fail_tx:
>+ dma_release_channel(dma->chan_tx);
>+fail_al:
>+ devm_kfree(dev, dma);
>+ dev_info(dev, "can't use DMA\n");
>+
>+ return ret;
>+}
>+
>+static void i2c_imx_dma_callback(void *arg) {
>+ struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
>+ struct imx_i2c_dma *dma = i2c_imx->dma;
>+
>+ dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
>+ dma->dma_len, dma->dma_data_dir);
>+ complete(&dma->cmd_complete);
>+}
>+
>+static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
>+ struct i2c_msg *msgs)
>+{
>+ struct imx_i2c_dma *dma = i2c_imx->dma;
>+ struct dma_async_tx_descriptor *txdesc;
>+ struct device *dev = &i2c_imx->adapter.dev;
>+ struct device *chan_dev = dma->chan_using->device->dev;
>+
>+ dma->dma_buf = dma_map_single(chan_dev, msgs->buf,
>+ dma->dma_len, dma->dma_data_dir);
>+ if (dma_mapping_error(chan_dev, dma->dma_buf)) {
>+ dev_err(dev, "DMA mapping failed\n");
>+ return -EINVAL;
>+ }
>+
>+ txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
>+ dma->dma_len, dma->dma_transfer_dir,
>+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>+ if (!txdesc) {
>+ dev_err(dev, "Not able to get desc for DMA xfer\n");
>+ dma_unmap_single(chan_dev, dma->dma_buf,
>+ dma->dma_len, dma->dma_data_dir);
>+ return -EINVAL;
>+ }
>+
>+ txdesc->callback = i2c_imx_dma_callback;
>+ txdesc->callback_param = i2c_imx;
>+ dmaengine_submit(txdesc);
>+ dma_async_issue_pending(dma->chan_using);
>+
>+ return 0;
>+}
>+
>+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) {
>+ struct imx_i2c_dma *dma = i2c_imx->dma;
>+
>+ dma->dma_buf = 0;
>+ dma->dma_len = 0;
>+
>+ dma_release_channel(dma->chan_tx);
>+ dma->chan_tx = NULL;
>+
>+ dma_release_channel(dma->chan_rx);
>+ dma->chan_rx = NULL;
>+
>+ dma->chan_using = NULL;
>+}
>+
> /** Functions for IMX I2C adapter driver
>***************************************
>
>**************************************************************************
>*****/
>
>@@ -379,6 +530,7 @@ static int i2c_imx_start(struct imx_i2c_struct
>*i2c_imx)
> i2c_imx->stopped = 0;
>
> temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
>+ temp &= ~I2CR_DMAEN;
> imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> return result;
> }
>@@ -432,6 +584,160 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> return IRQ_NONE;
> }
>
>+static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
>+ struct i2c_msg *msgs)
>+{
>+ int result, timeout = IMX_I2C_DMA_TIMEOUT;
>+ unsigned int temp = 0;
>+ struct imx_i2c_dma *dma = i2c_imx->dma;
>+ struct device *dev = &i2c_imx->adapter.dev;
>+
>+ dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
>+ __func__, msgs->addr << 1);
>+
>+ reinit_completion(&i2c_imx->dma->cmd_complete);
>+ dma->chan_using = dma->chan_tx;
>+ dma->dma_transfer_dir = DMA_MEM_TO_DEV;
>+ dma->dma_data_dir = DMA_TO_DEVICE;
>+ dma->dma_len = msgs->len - 1;
>+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
>+ if (result)
>+ return result;
>+
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp |= I2CR_DMAEN;
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+
First enable DMA, and then submit BD like as i2c read function operation.
>+ /*
>+ * Write slave address.
>+ * The first byte muse be transmitted by the CPU.
>+ */
>+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
>+ result = wait_for_completion_interruptible_timeout(
>+ &i2c_imx->dma->cmd_complete,
>+ msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
>+ if (result <= 0) {
>+ dmaengine_terminate_all(dma->chan_using);
>+ if (result)
>+ return result;
>+ else
>+ return -ETIMEDOUT;
>+ }
>+
>+ /* Waiting for Transfer complete. */
>+ while (timeout--) {
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
>+ if (temp & I2SR_ICF)
>+ break;
>+ udelay(10);
>+ }
Whether there have better method like interrupt to avoid dead wait here until timeout ?
>+
>+ if (!timeout)
>+ return -ETIMEDOUT;
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp &= ~I2CR_DMAEN;
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+
>+ /* The last data byte must be transferred by the CPU. */
>+ imx_i2c_write_reg(msgs->buf[msgs->len-1],
>+ i2c_imx, IMX_I2C_I2DR);
>+ result = i2c_imx_trx_complete(i2c_imx);
>+ if (result)
>+ return result;
I don't understand why the last data need to be transmited by cpu. I guess you want to get IIF interrupt ?
>+
>+ result = i2c_imx_acked(i2c_imx);
>+ if (result)
>+ return result;
>+
>+ return 0;
>+}
>+
>+static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
>+ struct i2c_msg *msgs, bool is_lastmsg) {
>+ int result, timeout = IMX_I2C_DMA_TIMEOUT;
>+ unsigned int temp;
>+ struct imx_i2c_dma *dma = i2c_imx->dma;
>+ struct device *dev = &i2c_imx->adapter.dev;
>+
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp |= I2CR_DMAEN;
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+
>+ reinit_completion(&i2c_imx->dma->cmd_complete);
>+ dma->chan_using = dma->chan_rx;
>+ dma->dma_transfer_dir = DMA_DEV_TO_MEM;
>+ dma->dma_data_dir = DMA_FROM_DEVICE;
>+ /* The last two data bytes must be transferred by the CPU. */
>+ dma->dma_len = msgs->len - 2;
>+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
>+ if (result)
>+ return result;
>+
>+ result = wait_for_completion_interruptible_timeout(
>+ &i2c_imx->dma->cmd_complete,
>+ msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
>+ if (result <= 0) {
>+ dmaengine_terminate_all(dma->chan_using);
>+ if (result)
>+ return result;
>+ else
>+ return -ETIMEDOUT;
>+ }
>+
>+ /* waiting for Transfer complete. */
>+ while (timeout--) {
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
>+ if (temp & I2SR_ICF)
>+ break;
>+ udelay(10);
>+ }
>+
>+ if (!timeout)
>+ return -ETIMEDOUT;
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp &= ~I2CR_DMAEN;
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+
>+ /* read n-1 byte data */
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp |= I2CR_TXAK;
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+
>+ msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
>+ /* read n byte data */
>+ result = i2c_imx_trx_complete(i2c_imx);
>+ if (result)
>+ return result;
>+
>+ if (is_lastmsg) {
>+ /*
>+ * It must generate STOP before read I2DR to prevent
>+ * controller from generating another clock cycle
>+ */
>+ dev_dbg(dev, "<%s> clear MSTA\n", __func__);
>+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
>+ temp &= ~(I2CR_MSTA | I2CR_MTX);
>+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>+ i2c_imx_bus_busy(i2c_imx, 0);
>+ i2c_imx->stopped = 1;
>+ } else {
>+ /*
>+ * For i2c master receiver repeat restart operation like:
>+ * read -> repeat MSTA -> read/write
>+ * The controller must set MTX before read the last byte in
>+ * the first read operation, otherwise the first read cost
>+ * one extra clock cycle.
>+ */
>+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
>+ temp |= I2CR_MTX;
>+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
>+ }
>+ msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
>+
>+ return 0;
>+}
>+
> static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg
>*msgs) {
> int i, result;
>@@ -501,6 +807,9 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx,
>struct i2c_msg *msgs, bo
>
> dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
>
>+ if (i2c_imx->dma && msgs->len >= IMX_I2C_DMA_THRESHOLD
>&& !block_data)
>+ return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
>+
> /* read data */
> for (i = 0; i < msgs->len; i++) {
> u8 len = 0;
>@@ -615,8 +924,12 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
>#endif
> if (msgs[i].flags & I2C_M_RD)
> result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
>- else
>- result = i2c_imx_write(i2c_imx, &msgs[i]);
>+ else {
>+ if (i2c_imx->dma && msgs[i].len >= IMX_I2C_DMA_THRESHOLD)
>+ result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
>+ else
>+ result = i2c_imx_write(i2c_imx, &msgs[i]);
>+ }
> if (result)
> goto fail0;
> }
>@@ -651,6 +964,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
> void __iomem *base;
> int irq, ret;
>+ dma_addr_t phy_addr;
>
> dev_dbg(&pdev->dev, "<%s>\n", __func__);
>
>@@ -661,6 +975,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>+ phy_addr = (dma_addr_t)res->start;
> base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(base))
> return PTR_ERR(base);
>@@ -743,6 +1058,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
> i2c_imx->adapter.name);
> dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
>
>+ /* Init DMA config if support*/
>+ i2c_imx_dma_request(i2c_imx, phy_addr);
>+
> return 0; /* Return OK */
> }
>
>@@ -754,6 +1072,9 @@ static int i2c_imx_remove(struct platform_device
>*pdev)
> dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> i2c_del_adapter(&i2c_imx->adapter);
>
>+ if (i2c_imx->dma)
>+ i2c_imx_dma_free(i2c_imx);
>+
> /* setup chip registers to defaults */
> imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
>--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists