| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Aug 2014 09:53:07 +0530 From: Sanjeev Sharma <sanjeev_sharma@...tor.com> To: <gregkh@...uxfoundation.org> CC: <oort10@...il.com>, <devel@...verdev.osuosl.org>, <linux-kernel@...r.kernel.org>, Sanjeev Sharma <sanjeev_sharma@...tor.com>, Sanjeev Sharma <Sanjeev_Sharma@...tor.com> Subject: [PATCH v2] staging:r819xU: coding style: Fixed commenting style This is a patch to the r819xU_phyreg.h file that fixes commenting style warning Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@...tor.com> --- drivers/staging/rtl8192u/r819xU_phyreg.h | 189 ++++++++++++++++--------------- 1 file changed, 98 insertions(+), 91 deletions(-) diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h index 64285d6..b855627 100644 --- a/drivers/staging/rtl8192u/r819xU_phyreg.h +++ b/drivers/staging/rtl8192u/r819xU_phyreg.h @@ -2,10 +2,11 @@ #define _R819XU_PHYREG_H -#define RF_DATA 0x1d4 // FW will write RF data in the register. +#define RF_DATA 0x1d4 /* FW will write RF data in the register.*/ -//Register //duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF -//page 1 +/* Register duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF + * page 1 + */ #define rPMAC_Reset 0x100 #define rPMAC_TxStart 0x104 #define rPMAC_TxLegacySIG 0x108 @@ -34,15 +35,16 @@ #define rPMAC_CCKCRxRC32OK 0x188 #define rPMAC_TxStatus 0x18c -//page8 -#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC +/* page8 */ +#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC */ #define rFPGA0_TxInfo 0x804 #define rFPGA0_PSDFunction 0x808 #define rFPGA0_TxGainStage 0x80c #define rFPGA0_RFTiming1 0x810 #define rFPGA0_RFTiming2 0x814 -//#define rFPGA0_XC_RFTiming 0x818 -//#define rFPGA0_XD_RFTiming 0x81c +/* #define rFPGA0_XC_RFTiming 0x818 + * #define rFPGA0_XD_RFTiming 0x81c + */ #define rFPGA0_XA_HSSIParameter1 0x820 #define rFPGA0_XA_HSSIParameter2 0x824 #define rFPGA0_XB_HSSIParameter1 0x828 @@ -79,51 +81,51 @@ #define rFPGA0_XAB_RFInterfaceRB 0x8e0 #define rFPGA0_XCD_RFInterfaceRB 0x8e4 -//page 9 -#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC +/* page 9 */ +#define rFPGA1_RFMOD 0x900 /* RF mode & OFDM TxSC */ #define rFPGA1_TxBlock 0x904 #define rFPGA1_DebugSelect 0x908 #define rFPGA1_TxInfo 0x90c -//page a +/* page a */ #define rCCK0_System 0xa00 #define rCCK0_AFESetting 0xa04 #define rCCK0_CCA 0xa08 -#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level -#define rCCK0_RxAGC2 0xa10 //AGC & DAGC +#define rCCK0_RxAGC1 0xa0c /* AGC default value, saturation level */ +#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */ #define rCCK0_RxHP 0xa14 -#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold -#define rCCK0_DSPParameter2 0xa1c //SQ threshold +#define rCCK0_DSPParameter1 0xa18 /* Timing recovery & Channel estimation threshold */ +#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */ #define rCCK0_TxFilter1 0xa20 #define rCCK0_TxFilter2 0xa24 -#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 -#define rCCK0_FalseAlarmReport 0xa2c //0xa2d +#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */ +#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d */ #define rCCK0_TRSSIReport 0xa50 -#define rCCK0_RxReport 0xa54 //0xa57 -#define rCCK0_FACounterLower 0xa5c //0xa5b -#define rCCK0_FACounterUpper 0xa58 //0xa5c +#define rCCK0_RxReport 0xa54 /* 0xa57 */ +#define rCCK0_FACounterLower 0xa5c /* 0xa5b */ +#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */ -//page c +/* page c */ #define rOFDM0_LSTF 0xc00 #define rOFDM0_TRxPathEnable 0xc04 #define rOFDM0_TRMuxPar 0xc08 #define rOFDM0_TRSWIsolation 0xc0c -#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter -#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix +#define rOFDM0_XARxAFE 0xc10 /* RxIQ DC offset, Rx digital filter, DC notch filter */ +#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */ #define rOFDM0_XBRxAFE 0xc18 #define rOFDM0_XBRxIQImbalance 0xc1c #define rOFDM0_XCRxAFE 0xc20 #define rOFDM0_XCRxIQImbalance 0xc24 #define rOFDM0_XDRxAFE 0xc28 #define rOFDM0_XDRxIQImbalance 0xc2c -#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD -#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. -#define rOFDM0_RxDetector3 0xc38 //Frame Sync. -#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI -#define rOFDM0_RxDSP 0xc40 //Rx Sync Path -#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC -#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold -#define rOFDM0_ECCAThreshold 0xc4c // energy CCA +#define rOFDM0_RxDetector1 0xc30 /* PD,BW & SBD */ +#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync.*/ +#define rOFDM0_RxDetector3 0xc38 /* Frame Sync.*/ +#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */ +#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */ +#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */ +#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */ +#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */ #define rOFDM0_XAAGCCore1 0xc50 #define rOFDM0_XAAGCCore2 0xc54 #define rOFDM0_XBAGCCore1 0xc58 @@ -156,7 +158,7 @@ #define rOFDM0_TxCoeff6 0xcb8 -//page d +/* page d */ #define rOFDM1_LSTF 0xd00 #define rOFDM1_TRxPathEnable 0xd04 #define rOFDM1_CFO 0xd08 @@ -169,9 +171,10 @@ #define rOFDM1_PseudoNoiseStateAB 0xd50 #define rOFDM1_PseudoNoiseStateCD 0xd54 #define rOFDM1_RxPseudoNoiseWgt 0xd58 -#define rOFDM_PHYCounter1 0xda0 //cca, parity fail -#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail -#define rOFDM_PHYCounter3 0xda8 //MCS not support +#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */ +#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */ + +#define rOFDM_PHYCounter3 0xda8 /* MCS not support */ #define rOFDM_ShortCFOAB 0xdac #define rOFDM_ShortCFOCD 0xdb0 #define rOFDM_LongCFOAB 0xdb4 @@ -186,7 +189,7 @@ #define rOFDM_RxEVMCSI 0xdd8 #define rOFDM_SIGReport 0xddc -//page e +/* page e */ #define rTxAGC_Rate18_06 0xe00 #define rTxAGC_Rate54_24 0xe04 #define rTxAGC_CCK_Mcs32 0xe08 @@ -196,8 +199,9 @@ #define rTxAGC_Mcs15_Mcs12 0xe1c -//RF -//Zebra1 +/* RF + * Zebra1 + */ #define rZebra1_HSSIEnable 0x0 #define rZebra1_TRxEnable1 0x1 #define rZebra1_TRxEnable2 0x2 @@ -209,18 +213,19 @@ #define rZebra1_RxLPF 0xb #define rZebra1_RxHPFCorner 0xc -//Zebra4 +/* Zebra4 */ #define rGlobalCtrl 0 #define rRTL8256_TxLPF 19 #define rRTL8256_RxLPF 11 -//RTL8258 +/* RTL8258 */ #define rRTL8258_TxLPF 0x11 #define rRTL8258_RxLPF 0x13 #define rRTL8258_RSSILPF 0xa -//Bit Mask -//page-1 +/* Bit Mask + * page-1 + */ #define bBBResetB 0x100 #define bGlobalResetB 0x200 #define bOFDMTxStart 0x4 @@ -266,7 +271,7 @@ #define bCCKTxStatus 0x1 #define bOFDMTxStatus 0x2 -//page-8 +/* page-8 */ #define bRFMOD 0x1 #define bJapanMode 0x2 #define bCCKTxSC 0x30 @@ -283,14 +288,14 @@ #define bRFStart 0x0000f000 #define bBBStart 0x000000f0 #define bBBCCKStart 0x0000000f -#define bPAEnd 0xf //Reg0x814 +#define bPAEnd 0xf /* Reg0x814 */ #define bTREnd 0x0f000000 #define bRFEnd 0x000f0000 -#define bCCAMask 0x000000f0 //T2R +#define bCCAMask 0x000000f0 /* T2R */ #define bR2RCCAMask 0x00000f00 #define bHSSI_R2TDelay 0xf8000000 #define bHSSI_T2RDelay 0xf80000 -#define bContTxHSSI 0x400 //chane gain at continue Tx +#define bContTxHSSI 0x400 /* chane gain at continue Tx */ #define bIGFromCCK 0x200 #define bAGCAddress 0x3f #define bRxHPTx 0x7000 @@ -301,7 +306,7 @@ #define b3WireDataLength 0x800 #define b3WireAddressLength 0x400 #define b3WireRFPowerDown 0x1 -//#define bHWSISelect 0x8 +/* #define bHWSISelect 0x8 */ #define b5GPAPEPolarity 0x40000000 #define b2GPAPEPolarity 0x80000000 #define bRFSW_TxDefaultAnt 0x3 @@ -312,7 +317,7 @@ #define bRFSI_3WireClock 0x2 #define bRFSI_3WireLoad 0x4 #define bRFSI_3WireRW 0x8 -#define bRFSI_3Wire 0xf //3-wire total control +#define bRFSI_3Wire 0xf /* 3-wire total control */ #define bRFSI_RFENV 0x10 #define bRFSI_TRSW 0x20 #define bRFSI_TRSWB 0x40 @@ -337,12 +342,11 @@ #define bLSIG_Length 0x1fffe #define bLSIG_Parity 0x20 #define bCCKRxPhase 0x4 -#define bLSSIReadAddress 0x3f000000 //LSSI "Read" Address -#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal +#define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address */ +#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */ #define bLSSIReadBackData 0xfff #define bLSSIReadOKFlag 0x1000 -#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz - +#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */ #define bRegulator0Standby 0x1 #define bRegulatorPLLStandby 0x2 #define bRegulator1Standby 0x4 @@ -395,12 +399,12 @@ #define bPSDSineToneScale 0x7f000000 #define bPSDReport 0xffff -//page-9 +/* page-9 */ #define bOFDMTxSC 0x30000000 #define bCCKTxOn 0x1 #define bOFDMTxOn 0x2 -#define bDebugPage 0xfff //reset debug page and also HWord, LWord -#define bDebugItem 0xff //reset debug page and LWord +#define bDebugPage 0xfff /* reset debug page and also HWord, LWord */ +#define bDebugItem 0xff /* reset debug page and LWord */ #define bAntL 0x10 #define bAntNonHT 0x100 #define bAntHT1 0x1000 @@ -408,7 +412,7 @@ #define bAntHT1S1 0x100000 #define bAntNonHTS1 0x1000000 -//page-a +/* page-a */ #define bCCKBBMode 0x3 #define bCCKTxPowerSaving 0x80 #define bCCKRxPowerSaving 0x40 @@ -429,7 +433,7 @@ #define bCCKBistMode 0x80000000 #define bCCKCCAMask 0x40000000 #define bCCKTxDACPhase 0x4 -#define bCCKRxADCPhase 0x20000000 //r_rx_clk +#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */ #define bCCKr_cp_mode0 0x0100 #define bCCKTxDCOffset 0xf0 #define bCCKRxDCOffset 0xf @@ -443,12 +447,12 @@ #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 //CCK Rx initial gain polarity +#define bCCKRFExtend 0x20000000 /* CCK Rx initial gain polarity */ #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 -#define bCCKRxRFSettle 0x1f //AGCsamp_dly +#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */ #define bCCKFixedRxAGC 0x8000 -//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 +/* #define bCCKRxAGCFormat 0x4000 */ /* remove to HSSI register 0x824 */ #define bCCKAntennaPolarity 0x2000 #define bCCKTxFilterType 0x0c00 #define bCCKRxAGCReportType 0x0300 @@ -489,7 +493,7 @@ #define bCCKDefaultRxPath 0xc000000 #define bCCKOptionRxPath 0x3000000 -//page c +/* page c */ #define bNumOfSTF 0x3 #define bShift_L 0xc0 #define bGI_TH 0xc @@ -591,8 +595,8 @@ #define bRxHP_BBP1 0x7000 #define bRxHP_BBP2 0x70000 #define bRxHP_BBP3 0x700000 -#define bRSSI_H 0x7f0000 //the threshold for high power -#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity +#define bRSSI_H 0x7f0000 /* the threshold for high power */ +#define bRSSI_Gen 0x7f000000 /* the threshold for ant diversity */ #define bRxSettle_TRSW 0x7 #define bRxSettle_LNA 0x38 #define bRxSettle_RSSI 0x1c0 @@ -626,7 +630,7 @@ #define bRxPD_Delay_TH1 0x38 #define bRxPD_Delay_TH2 0x1c0 #define bRxPD_DC_COUNT_MAX 0x600 -//#define bRxMF_Hold 0x3800 +/* #define bRxMF_Hold 0x3800 */ #define bRxPD_Delay_TH 0x8000 #define bRxProcess_Delay 0xf0000 #define bRxSearchrange_GI2_Early 0x700000 @@ -652,7 +656,7 @@ #define bExtLNAGain 0x7c00 -//page d +/* page d */ #define bSTBCEn 0x4 #define bAntennaMapping 0x10 #define bNss 0x20 @@ -662,12 +666,13 @@ #define bOFDMContinueTx 0x10000000 #define bOFDMSingleCarrier 0x20000000 #define bOFDMSingleTone 0x40000000 -//#define bRxPath1 0x01 -//#define bRxPath2 0x02 -//#define bRxPath3 0x04 -//#define bRxPath4 0x08 -//#define bTxPath1 0x10 -//#define bTxPath2 0x20 +/* #define bRxPath1 0x01 + * #define bRxPath2 0x02 + * #define bRxPath3 0x04 + * #define bRxPath4 0x08 + * #define bTxPath1 0x10 + * #define bTxPath2 0x20 + */ #define bHTDetect 0x100 #define bCFOEn 0x10000 #define bCFOValue 0xfff00000 @@ -680,8 +685,8 @@ #define bCounter_MCSNoSupport 0xffff #define bCounter_FastSync 0xffff #define bShortCFO 0xfff -#define bShortCFOTLength 12 //total -#define bShortCFOFLength 11 //fraction +#define bShortCFOTLength 12 /* total */ +#define bShortCFOFLength 11 /* fraction */ #define bLongCFO 0x7ff #define bLongCFOTLength 11 #define bLongCFOFLength 11 @@ -758,7 +763,7 @@ #define bUChCfg 0x7000000 #define bUpdEqz 0x8000000 -//page e +/* page e */ #define bTxAGCRate18_06 0x7f7f7f7f #define bTxAGCRate54_24 0x7f7f7f7f #define bTxAGCRateMCS32 0x7f @@ -769,7 +774,7 @@ #define bTxAGCRateMCS15_MCS12 0x7f7f7f7f -//Rx Pseduo noise +/* Rx Pseduo noise */ #define bRxPesudoNoiseOn 0x20000000 #define bRxPesudoNoise_A 0xff #define bRxPesudoNoise_B 0xff00 @@ -780,8 +785,9 @@ #define bPesudoNoiseState_C 0xffff #define bPesudoNoiseState_D 0xffff0000 -//RF -//Zebra1 +/* RF + * Zebra1 + */ #define bZebra1_HSSIEnable 0x8 #define bZebra1_TRxControl 0xc00 #define bZebra1_TRxGainSetting 0x07f @@ -792,18 +798,18 @@ #define bZebra1_TxLPFBW 0x400 #define bZebra1_RxLPFBW 0x600 -//Zebra4 +/* Zebra4 */ #define bRTL8256RegModeCtrl1 0x100 #define bRTL8256RegModeCtrl0 0x40 #define bRTL8256_TxLPFBW 0x18 #define bRTL8256_RxLPFBW 0x600 -//RTL8258 +/* RTL8258 */ #define bRTL8258_TxLPFBW 0xc #define bRTL8258_RxLPFBW 0xc00 #define bRTL8258_RSSILPFBW 0xc0 -//byte endable for sb_write +/* byte endable for sb_write */ #define bByte0 0x1 #define bByte1 0x2 #define bByte2 0x4 @@ -812,7 +818,7 @@ #define bWord1 0xc #define bDWord 0xf -//for PutRegsetting & GetRegSetting BitMask +/* for PutRegsetting & GetRegSetting BitMask */ #define bMaskByte0 0xff #define bMaskByte1 0xff00 #define bMaskByte2 0xff0000 @@ -821,7 +827,7 @@ #define bMaskLWord 0x0000ffff #define bMaskDWord 0xffffffff -//for PutRFRegsetting & GetRFRegSetting BitMask +/* for PutRFRegsetting & GetRFRegSetting BitMask */ #define bMask12Bits 0xfff #define bEnable 0x1 @@ -830,14 +836,14 @@ #define LeftAntenna 0x0 #define RightAntenna 0x1 -#define tCheckTxStatus 500 //500ms -#define tUpdateRxCounter 100 //100ms +#define tCheckTxStatus 500 /* 500ms */ +#define tUpdateRxCounter 100 /* 100ms */ #define rateCCK 0 #define rateOFDM 1 #define rateHT 2 -//define Register-End +/* define Register-End */ #define bPMAC_End 0x1ff #define bFPGAPHY0_End 0x8ff #define bFPGAPHY1_End 0x9ff @@ -845,12 +851,13 @@ #define bOFDMPHY0_End 0xcff #define bOFDMPHY1_End 0xdff -//define max debug item in each debug page -//#define bMaxItem_FPGA_PHY0 0x9 -//#define bMaxItem_FPGA_PHY1 0x3 -//#define bMaxItem_PHY_11B 0x16 -//#define bMaxItem_OFDM_PHY0 0x29 -//#define bMaxItem_OFDM_PHY1 0x0 +/* define max debug item in each debug page + * #define bMaxItem_FPGA_PHY0 0x9 + * #define bMaxItem_FPGA_PHY1 0x3 + * #define bMaxItem_PHY_11B 0x16 + * #define bMaxItem_OFDM_PHY0 0x29 + * #define bMaxItem_OFDM_PHY1 0x0 + */ #define bPMACControl 0x0 #define bWMACControl 0x1 @@ -868,4 +875,4 @@ #define rRTL8256TxBBBW 19 #define bRTL8256TxBBBW 0x18 -#endif //__INC_HAL8190PCIPHYREG_H +#endif /* __INC_HAL8190PCIPHYREG_H */ -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists