[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <53E8CF41.2050300@kernel.dk>
Date: Mon, 11 Aug 2014 08:12:17 -0600
From: Jens Axboe <axboe@...nel.dk>
To: Guenter Roeck <linux@...ck-us.net>,
"James E.J. Bottomley" <JBottomley@...allels.com>
CC: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
Christoph Hellwig <hch@....de>, Hannes Reinecke <hare@...e.de>,
Webb Scales <webbnh@...com>
Subject: Re: [PATCH] scsi: Fix qemu boot hang problem
On 2014-08-10 06:54, Guenter Roeck wrote:
> The latest kernel fails to boot qemu arm images when using scsi
> for disk access. Boot gets stuck after the following messages.
>
> brd: module loaded
> sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103)
> sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym0: SCSI BUS has been reset.
> scsi host0: sym-2.2.3
>
> Bisect points to commit 71e75c97f97a ("scsi: convert device_busy to
> atomic_t"). Code inspection shows the following suspicious change
> in scsi_request_fn.
>
> out_delay:
> - if (sdev->device_busy == 0 && !scsi_device_blocked(sdev))
> + if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
> blk_delay_queue(q, SCSI_QUEUE_DELAY);
> }
>
> 'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)',
> meaning the logic was reversed. Changing this expression to
> '!atomic_read(&sdev->device_busy)' fixes the problem.
>
> Cc: Christoph Hellwig <hch@....de>
> Cc: Hannes Reinecke <hare@...e.de>
> Cc: Webb Scales <webbnh@...com>
> Cc: Jens Axboe <axboe@...nel.dk>
> Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> ---
> drivers/scsi/scsi_lib.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 9c44392..ce62e87 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1774,7 +1774,7 @@ static void scsi_request_fn(struct request_queue *q)
> blk_requeue_request(q, req);
> atomic_dec(&sdev->device_busy);
> out_delay:
> - if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
> + if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
> blk_delay_queue(q, SCSI_QUEUE_DELAY);
> }
>
>
That's a no-brainer obvious fix!
Acked-by: Jens Axboe <axboe@...com>
--
Jens Axboe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists