Message-ID: <20140811162807.GW5821@linux.vnet.ibm.com>
Date:	Mon, 11 Aug 2014 09:28:07 -0700
From:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To:	Amit Shah <amit.shah@...hat.com>
Cc:	linux-kernel@...r.kernel.org, riel@...hat.com, mingo@...nel.org,
	laijs@...fujitsu.com, dipankar@...ibm.com,
	akpm@...ux-foundation.org, mathieu.desnoyers@...icios.com,
	josh@...htriplett.org, niv@...ibm.com, tglx@...utronix.de,
	peterz@...radead.org, rostedt@...dmis.org, dhowells@...hat.com,
	edumazet@...gle.com, dvhart@...ux.intel.com, fweisbec@...il.com,
	oleg@...hat.com, sbw@....edu
Subject: Re: [PATCH tip/core/rcu 1/2] rcu: Parallelize and economize NOCB
 kthread wakeups

On Mon, Aug 11, 2014 at 12:43:08PM +0530, Amit Shah wrote:
> On (Fri) 08 Aug 2014 [14:46:48], Paul E. McKenney wrote:
> > On Fri, Aug 08, 2014 at 02:43:47PM -0700, Paul E. McKenney wrote:
> > > On Sat, Aug 09, 2014 at 12:04:24AM +0530, Amit Shah wrote:
> > > > On (Fri) 08 Aug 2014 [11:18:35], Paul E. McKenney wrote:
> > > 
> > > [ . . . ]
> > > 
> > > > > Hmmm... What happens if you boot a7d7a143d0b4cb1914705884ca5c25e322dba693
> > > > > with the kernel parameter "acpi=off"?
> > > > 
> > > > That doesn't change anything - still hangs.
> > > > 
> > > > I intend to look at this more on Monday, though - turning in for
> > > > today.  In the meantime, if there's anything else you'd like me to
> > > > try, please let me know.
> > > 
> > > OK, given that I still cannot reproduce it, I do need your help with
> > > the diagnostics.  And so what sorts of diagnostics work for you in
> > > the hung state?  Are you able to dump ftrace buffers?
> > > 
> > > If you are able to dump ftrace buffers, please enable rcu:rcu_nocb_wake
> > > and send me the resulting trace.
> > 
> > And another random kernel boot parameter to try is rcu_nocb_poll.
> 
> Right, this gets the boot going again:

OK, that likely indicates a lost wakeup.  The event tracing enabled by
"rcu:rcu_nocb_wake" should help track those down.  Last time, it was qemu
losing the wakeups, but maybe it is RCU this time.  ;-)

							Thanx, Paul

> --- /var/tmp/rcu-bad.txt  2014-08-11 12:39:53.571306488 +0530
> +++ /var/tmp/rcu-good-nocb-poll.txt  2014-08-11 12:40:37.760432052 +0530
> @@ -1,7 +1,7 @@
> -$ qemu-kvm -m 512 -smp 1 -cpu host,+kvmclock,+x2apic -enable-kvm  -kernel ~/src/linux/arch/x86/boot/bzImage /guests/f11-auto.qcow2  -append 'root=/dev/sda2 acpi=off console=ttyS0 console=tty0'  -snapshot  -serial stdio
> +$ qemu-kvm -m 512 -smp 1 -cpu host,+kvmclock,+x2apic -enable-kvm  -kernel ~/src/linux/arch/x86/boot/bzImage /guests/f11-auto.qcow2  -append 'root=/dev/sda2 acpi=off console=ttyS0 console=tty0 rcu_nocb_poll'  -snapshot  -serial stdio
>  Initializing cgroup subsys cpu
>  Linux version 3.16.0+ (amit@...bl.mre) (gcc version 4.8.3 20140624 (Red Hat 4.8.3-1) (GCC) ) #80 SMP PREEMPT Fri Aug 8 22:57:35 IST 2014
> -Command line: root=/dev/sda2 acpi=off console=ttyS0 console=tty0
> +Command line: root=/dev/sda2 acpi=off console=ttyS0 console=tty0 rcu_nocb_poll
>  e820: BIOS-provided physical RAM map:
>  BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>  BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
> @@ -47,14 +47,14 @@
>  KVM setup async PF for cpu 0
>  kvm-stealtime: cpu 0, msr 1fa0cbc0
>  Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128903
> -Kernel command line: root=/dev/sda2 acpi=off console=ttyS0 console=tty0
> +Kernel command line: root=/dev/sda2 acpi=off console=ttyS0 console=tty0 rcu_nocb_poll
>  PID hash table entries: 2048 (order: 2, 16384 bytes)
>  Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>  Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>  xsave: enabled xstate_bv 0x7, cntxt size 0x340
>  AGP: Checking aperture...
>  AGP: No AGP bridge found
> -Memory: 485836K/523888K available (4029K kernel code, 727K rwdata, 2184K rodata, 2872K init, 14172K bss, 38052K reserved)
> +Memory: 485832K/523888K available (4029K kernel code, 727K rwdata, 2184K rodata, 2872K init, 14172K bss, 38056K reserved)
>  SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>  Preemptible hierarchical RCU implementation.
>  	     RCU debugfs-based tracing is enabled.
> @@ -63,6 +63,7 @@
>    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
>    Offload RCU callbacks from all CPUs
>    Offload RCU callbacks from CPUs: 0.
> +  Poll for callbacks from no-CBs CPUs.
>  RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
>  NO_HZ: Full dynticks CPUs: 1-3.
>  NR_IRQS:4352 nr_irqs:256 16
> @@ -114,3 +115,118 @@
>  cpuidle: using governor ladder
>  cpuidle: using governor menu
>  PCI: Using configuration type 1 for base access
> +ACPI: Interpreter disabled.
> +vgaarb: loaded
> +SCSI subsystem initialized
> +pps_core: LinuxPPS API ver. 1 registered
> +pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
> +PTP clock support registered
> +PCI: Probing PCI hardware
> +PCI host bridge to bus 0000:00
> +pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> +pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
> +pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
> +pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
> +pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
> +pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
> +pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
> +pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
> +pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
> +vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> +pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
> +Switched to clocksource kvm-clock
> +pnp: PnP ACPI: disabled
> +NET: Registered protocol family 2
> +TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> +TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
> +TCP: Hash tables configured (established 4096 bind 4096)
> +TCP: reno registered
> +UDP hash table entries: 256 (order: 3, 49152 bytes)
> +UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
> +NET: Registered protocol family 1
> +pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> +pci 0000:00:01.0: PIIX3: Enabling Passive Release
> +pci 0000:00:01.0: Activating ISA DMA hang workarounds
> +platform rtc_cmos: registered platform RTC device (no PNP device found)
> +rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
> +rcu-torture: Creating rcu_torture_writer task
> +rcu-torture: Creating rcu_torture_fakewriter task
> +rcu-torture: rcu_torture_writer task started
> +rcu-torture: Creating rcu_torture_fakewriter task
> +rcu-torture: rcu_torture_fakewriter task started
> +rcu-torture: Creating rcu_torture_fakewriter task
> +rcu-torture: rcu_torture_fakewriter task started
> +rcu-torture: Creating rcu_torture_fakewriter task
> +rcu-torture: rcu_torture_fakewriter task started
> +rcu-torture: Creating rcu_torture_reader task
> +rcu-torture: rcu_torture_fakewriter task started
> +rcu-torture: Creating rcu_torture_stats task
> +rcu-torture: rcu_torture_reader task started
> +rcu-torture: Creating torture_shuffle task
> +rcu-torture: rcu_torture_stats task started
> +rcu-torture: Creating torture_stutter task
> +rcu-torture: torture_shuffle task started
> +rcu-torture: torture_stutter task started
> +futex hash table entries: 256 (order: 3, 32768 bytes)
> +audit: initializing netlink subsys (disabled)
> +audit: type=2000 audit(1407740961.384:1): initialized
> +HugeTLB registered 2 MB page size, pre-allocated 0 pages
> +msgmni has been set to 948
> +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> +io scheduler noop registered (default)
> +pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> +Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> +�serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> +Non-volatile memory driver v1.3
> +Linux agpgart interface v0.103
> +brd: module loaded
> +loop: module loaded
> +scsi host0: ata_piix
> +scsi host1: ata_piix
> +ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14
> +ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15
> +libphy: Fixed MDIO Bus: probed
> +e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> +e1000: Copyright (c) 1999-2006 Intel Corporation.
> +e1000 0000:00:03.0: found PCI INT A -> IRQ 11
> +ata1.00: ATA-7: QEMU HARDDISK, 1.6.2, max UDMA/100
> +ata1.00: 10485760 sectors, multi 16: LBA48 
> +ata1.00: configured for MWDMA2
> +ata2.00: ATAPI: QEMU DVD-ROM, 1.6.2, max UDMA/100
> +ata2.00: configured for MWDMA2
> +scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2    PQ: 0 ANSI: 5
> +sd 0:0:0:0: [sda] 10485760 512-byte logical blocks: (5.36 GB/5.00 GiB)
> +sd 0:0:0:0: [sda] Write Protect is off
> +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> +scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     1.6. PQ: 0 ANSI: 5
> +sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
> +cdrom: Uniform CD-ROM driver Revision: 3.20
> + sda: sda1 sda2
> +sd 0:0:0:0: [sda] Attached SCSI disk
> +e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
> +e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
> +i8042: PNP: No PS/2 controller found. Probing ports directly.
> +serio: i8042 KBD port at 0x60,0x64 irq 1
> +serio: i8042 AUX port at 0x60,0x64 irq 12
> +mousedev: PS/2 mouse device common for all mice
> +input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> +pps pps0: new PPS source ktimer
> +pps pps0: ktimer PPS source registered
> +pps_ldisc: PPS line discipline registered
> +device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@...hat.com
> +TCP: cubic registered
> +NET: Registered protocol family 17
> +kmemleak: Kernel memory leak detector initialized
> +kmemleak: Automatic memory scanning thread started
> +EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
> +EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
> +EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
> +VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
> +debug: unmapping init [mem 0xffffffff818b7000-0xffffffff81b84fff]
> +Write protecting the kernel read-only data: 8192k
> +debug: unmapping init [mem 0xffff8800013f1000-0xffff8800013fffff]
> +debug: unmapping init [mem 0xffff880001622000-0xffff8800017fffff]
> +rcu-torture: rtc: ffffffff828fd3f0 ver: 1 tfle: 0 rta: 1 rtaf: 0 rtf: 0 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 1 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=250) barrier: 0/0:0
> +rcu-torture: Reader Pipe:  2 0 0 0 0 0 0 0 0 0 0
> +rcu-torture: Reader Batch:  2 0 0 0 0 0 0 0 0 0 0
> +rcu-torture: Free-Block Circulation:  0 0 0 0 0 0 0 0 0 0 0
> 
> 
> 		Amit
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists