| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1407921127-8590-7-git-send-email-lee.jones@linaro.org> Date: Wed, 13 Aug 2014 10:12:05 +0100 From: Lee Jones <lee.jones@...aro.org> To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org Cc: lee.jones@...aro.org, kernel@...inux.com, computersforpeace@...il.com, pekon@...-sem.com, linux-mtd@...ts.infradead.org Subject: [PATCH 6/8] mtd: nand: add shared register defines for ST's NAND Controller drivers Provide register and bit definitions used by STM's BCH Controller driver. We place these into a shared location as they will be used by other STM NAND Controllers as they appear. Signed-off-by: Lee Jones <lee.jones@...aro.org> --- drivers/mtd/nand/stm_nand_regs.h | 304 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 drivers/mtd/nand/stm_nand_regs.h diff --git a/drivers/mtd/nand/stm_nand_regs.h b/drivers/mtd/nand/stm_nand_regs.h new file mode 100644 index 0000000..fe28364 --- /dev/null +++ b/drivers/mtd/nand/stm_nand_regs.h @@ -0,0 +1,304 @@ +/* + * drivers/mtd/nand/stm_nand_regs.h + * + * STMicroelectronics NAND Controller register definitions + * + * Copyright (c) 2008-2014 STMicroelectronics Limited + * Author: Angus Clark <Angus.Clark@...com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef STM_NANDC_REGS_H +#define STM_NANDC_REGS_H + +#define EMISS_CFG 0x1000 + +/* Hamming Controller Registers (Offsets from EMINAND_BASE) */ +#define NANDHAM_BOOTBANK_CFG 0x000 +#define NANDHAM_RBN_STA 0x004 +#define NANDHAM_INT_EN 0x010 +#define NANDHAM_INT_STA 0x014 +#define NANDHAM_INT_CLR 0x018 +#define NANDHAM_INT_EDGE_CFG 0x01C +#define NANDHAM_CTL_TIMING 0x040 +#define NANDHAM_WEN_TIMING 0x044 +#define NANDHAM_REN_TIMING 0x048 +#define NANDHAM_BLOCK_ZERO_REMAP_REG 0x04C +#define NANDHAM_FLEXMODE_CFG 0x100 +#define NANDHAM_FLEX_MUXCTRL 0x104 +#define NANDHAM_FLEX_DATAWRITE_CONFIG 0x10C +#define NANDHAM_FLEX_DATAREAD_CONFIG 0x110 +#define NANDHAM_FLEX_CMD 0x114 +#define NANDHAM_FLEX_ADD 0x118 +#define NANDHAM_FLEX_DATA 0x120 +#define NANDHAM_VERSION_REG 0x144 +#define NANDHAM_MULTI_CS_CONFIG_REG 0x1EC +#define NANDHAM_AFM_SEQ_REG_1 0x200 +#define NANDHAM_AFM_SEQ_REG_2 0x204 +#define NANDHAM_AFM_SEQ_REG_3 0x208 +#define NANDHAM_AFM_SEQ_REG_4 0x20C +#define NANDHAM_AFM_ADD 0x210 +#define NANDHAM_AFM_EXTRA 0x214 +#define NANDHAM_AFM_CMD 0x218 +#define NANDHAM_AFM_SEQ_CFG 0x21C +#define NANDHAM_AFM_GEN_CFG 0x220 +#define NANDHAM_AFM_SEQ_STA 0x240 +#define NANDHAM_AFM_ECC_REG_0 0x280 +#define NANDHAM_AFM_ECC_REG_1 0x284 +#define NANDHAM_AFM_ECC_REG_2 0x288 +#define NANDHAM_AFM_ECC_REG_3 0x28C +#define NANDHAM_AFM_DATA_FIFO 0x300 + +/* BCH Controller Registers (Offsets from EMI_NAND) */ +#define NANDBCH_BOOTBANK_CFG 0x000 +#define NANDBCH_RBN_STA 0x004 +#define NANDBCH_INT_EN 0x010 +#define NANDBCH_INT_STA 0x014 +#define NANDBCH_INT_CLR 0x018 +#define NANDBCH_INT_EDGE_CFG 0x01C +#define NANDBCH_CTL_TIMING 0x040 +#define NANDBCH_WEN_TIMING 0x044 +#define NANDBCH_REN_TIMING 0x048 +#define NANDBCH_BLOCK_ZERO_REMAP_REG 0x04C +#define NANDBCH_BOOT_STATUS 0x050 +#define NANDBCH_FALSE_BOOT_REG 0x054 +#define NANDBCH_FALSE_BOOT_STATUS 0x058 +#define NANDBCH_CONTROLLER_CFG 0x100 +#define NANDBCH_FLEX_MUXCTRL 0x104 +#define NANDBCH_FLEX_DATAWRITE_CONFIG 0x10C +#define NANDBCH_FLEX_DATAREAD_CONFIG 0x110 +#define NANDBCH_VERSION_REG 0x144 +#define NANDBCH_ADDRESS_REG_1 0x1F0 +#define NANDBCH_ADDRESS_REG_2 0x1F4 +#define NANDBCH_ADDRESS_REG_3 0x1F8 +#define NANDBCH_MULTI_CS_CONFIG_REG 0x1FC +#define NANDBCH_SEQ_REG_1 0x200 +#define NANDBCH_SEQ_REG_2 0x204 +#define NANDBCH_SEQ_REG_3 0x208 +#define NANDBCH_SEQ_REG_4 0x20C +#define NANDBCH_ADD 0x210 +#define NANDBCH_EXTRA_REG 0x214 +#define NANDBCH_CMD 0x218 +#define NANDBCH_GEN_CFG 0x220 +#define NANDBCH_DELAY_REG 0x224 +#define NANDBCH_SEQ_CFG 0x22C +#define NANDBCH_SEQ_STA 0x270 +#define NANDBCH_DATA_BUFFER_ENTRY_0 0x280 +#define NANDBCH_DATA_BUFFER_ENTRY_1 0x284 +#define NANDBCH_DATA_BUFFER_ENTRY_2 0x288 +#define NANDBCH_DATA_BUFFER_ENTRY_3 0x28C +#define NANDBCH_DATA_BUFFER_ENTRY_4 0x290 +#define NANDBCH_DATA_BUFFER_ENTRY_5 0x294 +#define NANDBCH_DATA_BUFFER_ENTRY_6 0x298 +#define NANDBCH_DATA_BUFFER_ENTRY_7 0x29C +#define NANDBCH_ECC_SCORE_REG_A 0x2A0 +#define NANDBCH_ECC_SCORE_REG_B 0x2A4 +#define NANDBCH_CHECK_STATUS_REG_A 0x2A8 +#define NANDBCH_CHECK_STATUS_REG_B 0x2AC +#define NANDBCH_BUFFER_LIST_PTR 0x300 +#define NANDBCH_SEQ_PTR_REG 0x304 +#define NANDBCH_ERROR_THRESHOLD_REG 0x308 + +#define EMISS_NAND_DMA 0x0800 +/* EMISS NAND BCH STPLUG Registers (Offsets from EMISS_NAND_DMA) */ +#define EMISS_NAND_RD_DMA_PAGE_SIZE 0x000 +#define EMISS_NAND_RD_DMA_MAX_OPCODE_SIZE 0x004 +#define EMISS_NAND_RD_DMA_MIN_OPCODE_SIZE 0x008 +#define EMISS_NAND_RD_DMA_MAX_CHUNK_SIZE 0x00C +#define EMISS_NAND_RD_DMA_MAX_MESSAGE_SIZE 0x010 + +#define EMISS_NAND_WR_DMA_PAGE_SIZE 0x100 +#define EMISS_NAND_WR_DMA_MAX_OPCODE_SIZE 0x104 +#define EMISS_NAND_WR_DMA_MIN_OPCODE_SIZE 0x108 +#define EMISS_NAND_WR_DMA_MAX_CHUNK_SIZE 0x10C +#define EMISS_NAND_WR_DMA_MAX_MESSAGE_SIZE 0x110 + +/* + * Hamming/BCH controller interrupts + */ + +/* NANDxxx_INT_EN/NANDxxx_INT_STA */ +/* Common */ +#define NAND_INT_ENABLE (0x1 << 0) +#define NAND_INT_RBN (0x1 << 2) +#define NAND_INT_SEQCHECK (0x1 << 5) +/* Hamming only */ +#define NANDHAM_INT_DATA_DREQ (0x1 << 3) +#define NANDHAM_INT_SEQ_DREQ (0x1 << 4) +#define NANDHAM_INT_ECC_FIX_REQ (0x1 << 6) +/* BCH only */ +#define NANDBCH_INT_SEQNODESOVER (0x1 << 7) +#define NANDBCH_INT_ECCTHRESHOLD (0x1 << 8) + +/* NANDxxx_INT_CLR */ +/* Common */ +#define NAND_INT_CLR_RBN (0x1 << 2) +#define NAND_INT_CLR_SEQCHECK (0x1 << 3) +/* Hamming only */ +#define NANDHAM_INT_CLR_ECC_FIX_REQ (0x1 << 4) +#define NANDHAM_INT_CLR_DATA_DREQ (0x1 << 5) +#define NANDHAM_INT_CLR_SEQ_DREQ (0x1 << 6) +/* BCH only */ +#define NANDBCH_INT_CLR_SEQNODESOVER (0x1 << 5) +#define NANDBCH_INT_CLR_ECCTHRESHOLD (0x1 << 6) + +/* NANDxxx_INT_EDGE_CFG */ +#define NAND_EDGE_CFG_RBN_RISING 0x1 +#define NAND_EDGE_CFG_RBN_FALLING 0x2 +#define NAND_EDGE_CFG_RBN_ANY 0x3 + +/* NANDBCH_CONTROLLER_CFG/NANDHAM_FLEXMODE_CFG */ +#define CFG_ENABLE_FLEX 0x1 +#define CFG_ENABLE_AFM 0x2 +#define CFG_RESET (0x1 << 3) +#define CFG_RESET_ECC(x) (0x1 << (7 + (x))) +#define CFG_RESET_ECC_ALL (0xff << 7) + + +/* + * BCH Controller + */ + +/* NANDBCH_BOOTBANK_CFG */ +#define BOOT_CFG_RESET (0x1 << 3) + +/* NANDBCH_CTL_TIMING */ +#define NANDBCH_CTL_SETUP(x) ((x) & 0xff) +#define NANDBCH_CTL_HOLD(x) (((x) & 0xff) << 8) +#define NANDBCH_CTL_WERBN(x) (((x) & 0xff) << 24) + +/* NANDBCH_WEN_TIMING */ +#define NANDBCH_WEN_ONTIME(x) ((x) & 0xff) +#define NANDBCH_WEN_OFFTIME(x) (((x) & 0xff) << 8) +#define NANDBCH_WEN_ONHALFCYCLE (0x1 << 16) +#define NANDBCH_WEN_OFFHALFCYCLE (0x1 << 17) + +/* NANDBCH_REN_TIMING */ +#define NANDBCH_REN_ONTIME(x) ((x) & 0xff) +#define NANDBCH_REN_OFFTIME(x) (((x) & 0xff) << 8) +#define NANDBCH_REN_ONHALFCYCLE (0x1 << 16) +#define NANDBCH_REN_OFFHALFCYCLE (0x1 << 17) +#define NANDBCH_REN_TELQV(x) (((x) & 0xff) << 24) + +/* NANDBCH_BLOCK_ZERO_REMAP_REG */ +#define NANDBCH_BACKUP_COPY_FOUND (0x1 << 0) +#define NANDBCH_ORIG_CODE_CORRUPTED (0x1 << 1) +#define NANDBCH_BLK_ZERO_REMAP(x) ((x) >> 14) + +/* NANDBCH_BOOT_STATUS */ +#define NANDBCH_BOOT_MAX_ERRORS(x) ((x) & 0x1f) + +/* NANDBCH_GEN_CFG */ +#define GEN_CFG_DATA_8_NOT_16 (0x1 << 16) +#define GEN_CFG_EXTRA_ADD_CYCLE (0x1 << 18) +#define GEN_CFG_2X8_MODE (0x1 << 19) +#define GEN_CFG_ECC_SHIFT 20 +#define GEN_CFG_18BIT_ECC (BCH_18BIT_ECC << \ + GEN_CFG_ECC_SHIFT) +#define GEN_CFG_30BIT_ECC (BCH_30BIT_ECC << \ + GEN_CFG_ECC_SHIFT) +#define GEN_CFG_NO_ECC (BCH_NO_ECC << \ + GEN_CFG_ECC_SHIFT) +#define GEN_CFG_LAST_SEQ_NODE (0x1 << 22) + +/* NANDBCH_SEQ_CFG */ +#define SEQ_CFG_REPEAT_COUNTER(x) ((x) & 0xffff) +#define SEQ_CFG_SEQ_IDENT(x) (((x) & 0xff) << 16) +#define SEQ_CFG_DATA_WRITE (0x1 << 24) +#define SEQ_CFG_ERASE (0x1 << 25) +#define SEQ_CFG_GO_STOP (0x1 << 26) + +/* NANDBCH_SEQ_STA */ +#define SEQ_STA_RUN (0x1 << 4) + +/* + * BCH Commands + */ +#define BCH_OPC_STOP 0x0 +#define BCH_OPC_CMD 0x1 +#define BCH_OPC_INC 0x2 +#define BCH_OPC_DEC_JUMP 0x3 +#define BCH_OPC_DATA 0x4 +#define BCH_OPC_DELAY 0x5 +#define BCH_OPC_CHECK 0x6 +#define BCH_OPC_ADDR 0x7 +#define BCH_OPC_NEXT_CHIP_ON 0x8 +#define BCH_OPC_DEC_JMP_MCS 0x9 +#define BCH_OPC_ECC_SCORE 0xA + +#define BCH_INSTR(opc, opr) ((opc) | ((opr) << 4)) + +#define BCH_CMD_ADDR BCH_INSTR(BCH_OPC_CMD, 0) +#define BCH_CL_CMD_1 BCH_INSTR(BCH_OPC_CMD, 1) +#define BCH_CL_CMD_2 BCH_INSTR(BCH_OPC_CMD, 2) +#define BCH_CL_CMD_3 BCH_INSTR(BCH_OPC_CMD, 3) +#define BCH_CL_EX_0 BCH_INSTR(BCH_OPC_CMD, 4) +#define BCH_CL_EX_1 BCH_INSTR(BCH_OPC_CMD, 5) +#define BCH_CL_EX_2 BCH_INSTR(BCH_OPC_CMD, 6) +#define BCH_CL_EX_3 BCH_INSTR(BCH_OPC_CMD, 7) +#define BCH_INC(x) BCH_INSTR(BCH_OPC_INC, (x)) +#define BCH_DEC_JUMP(x) BCH_INSTR(BCH_OPC_DEC_JUMP, (x)) +#define BCH_STOP BCH_INSTR(BCH_OPC_STOP, 0) +#define BCH_DATA_1_SECTOR BCH_INSTR(BCH_OPC_DATA, 0) +#define BCH_DATA_2_SECTOR BCH_INSTR(BCH_OPC_DATA, 1) +#define BCH_DATA_4_SECTOR BCH_INSTR(BCH_OPC_DATA, 2) +#define BCH_DATA_8_SECTOR BCH_INSTR(BCH_OPC_DATA, 3) +#define BCH_DATA_16_SECTOR BCH_INSTR(BCH_OPC_DATA, 4) +#define BCH_DATA_32_SECTOR BCH_INSTR(BCH_OPC_DATA, 5) +#define BCH_DELAY_0 BCH_INSTR(BCH_OPC_DELAY, 0) +#define BCH_DELAY_1 BCH_INSTR(BCH_OPC_DELAY, 1) +#define BCH_OP_ERR BCH_INSTR(BCH_OPC_CHECK, 0) +#define BCH_CACHE_ERR BCH_INSTR(BCH_OPC_CHECK, 1) +#define BCH_ERROR BCH_INSTR(BCH_OPC_CHECK, 2) +#define BCH_AL_EX_0 BCH_INSTR(BCH_OPC_ADDR, 0) +#define BCH_AL_EX_1 BCH_INSTR(BCH_OPC_ADDR, 1) +#define BCH_AL_EX_2 BCH_INSTR(BCH_OPC_ADDR, 2) +#define BCH_AL_EX_3 BCH_INSTR(BCH_OPC_ADDR, 3) +#define BCH_AL_AD_0 BCH_INSTR(BCH_OPC_ADDR, 4) +#define BCH_AL_AD_1 BCH_INSTR(BCH_OPC_ADDR, 5) +#define BCH_AL_AD_2 BCH_INSTR(BCH_OPC_ADDR, 6) +#define BCH_AL_AD_3 BCH_INSTR(BCH_OPC_ADDR, 7) +#define BCH_NEXT_CHIP_ON BCH_INSTR(BCH_OPC_NEXT_CHIP_ON, 0) +#define BCH_DEC_JMP_MCS(x) BCH_INSTR(BCH_OPC_DEC_JMP_MCS, (x)) +#define BCH_ECC_SCORE(x) BCH_INSTR(BCH_OPC_ECC_SCORE, (x)) + + +/* + * Hamming-FLEX register fields + */ + +/* NANDHAM_FLEX_DATAREAD/WRITE_CONFIG */ +#define FLEX_DATA_CFG_WAIT_RBN (0x1 << 27) +#define FLEX_DATA_CFG_BEATS_1 (0x1 << 28) +#define FLEX_DATA_CFG_BEATS_2 (0x2 << 28) +#define FLEX_DATA_CFG_BEATS_3 (0x3 << 28) +#define FLEX_DATA_CFG_BEATS_4 (0x0 << 28) +#define FLEX_DATA_CFG_BYTES_1 (0x0 << 30) +#define FLEX_DATA_CFG_BYTES_2 (0x1 << 30) +#define FLEX_DATA_CFG_CSN (0x1 << 31) + +/* NANDHAM_FLEX_CMD */ +#define FLEX_CMD_RBN (0x1 << 27) +#define FLEX_CMD_BEATS_1 (0x1 << 28) +#define FLEX_CMD_BEATS_2 (0x2 << 28) +#define FLEX_CMD_BEATS_3 (0x3 << 28) +#define FLEX_CMD_BEATS_4 (0x0 << 28) +#define FLEX_CMD_CSN (0x1 << 31) +#define FLEX_CMD(x) (((x) & 0xff) | \ + FLEX_CMD_RBN | \ + FLEX_CMD_BEATS_1 | \ + FLEX_CMD_CSN) +/* NANDHAM_FLEX_ADD */ +#define FLEX_ADDR_RBN (0x1 << 27) +#define FLEX_ADDR_BEATS_1 (0x1 << 28) +#define FLEX_ADDR_BEATS_2 (0x2 << 28) +#define FLEX_ADDR_BEATS_3 (0x3 << 28) +#define FLEX_ADDR_BEATS_4 (0x0 << 28) +#define FLEX_ADDR_ADD8_VALID (0x1 << 30) +#define FLEX_ADDR_CSN (0x1 << 31) + +#endif /* STM_NANDC_REGS_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists