[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-id: <20140814094047.444a3459@songinha-Samsung-DeskTop-System>
Date: Thu, 14 Aug 2014 09:40:47 +0900
From: Inha Song <ideal.song@...sung.com>
To: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Cc: broonie@...nel.org, alsa-devel@...a-project.org,
patches@...nsource.wolfsonmicro.com, linux-kernel@...r.kernel.org,
lee.jones@...aro.org, lgirdwood@...il.com, sameo@...ux.intel.com,
devicetree@...r.kernel.org, galak@...eaurora.org,
ijc+devicetree@...lion.org.uk, mark.rutland@....com,
pawel.moll@....com, robh+dt@...nel.org, cw00.choi@...sung.com
Subject: Re: [alsa-devel] [PATCH v2 2/2] mfd: arizona: Update DT binding to
support INn_MODE init_data
Hi, Charles.
Thanks for your review.
On Wed, 13 Aug 2014 13:18:14 +0100
Charles Keepax <ckeepax@...nsource.wolfsonmicro.com> wrote:
> On Wed, Aug 13, 2014 at 08:54:56PM +0900, Inha Song wrote:
> > This patch update DT binding to support INn_MODE init_data. Each
> > input signal path can be configurated either as a Analogue or
> > Digital using the INn_MODE registers.
> >
> > Signed-off-by: Inha Song <ideal.song@...sung.com>
> > ---
> > Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> > index 5c7e723..b8c131e 100644
> > --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> > @@ -42,6 +42,14 @@ Optional properties:
> > the chip default will be used. If present exactly five values must
> > be specified.
> >
> > + - wlf,inmode : A list of INn_MODE register values, where n is the number
> > + of input signal. Each input signal path can be configurated either as a
> > + Analogue or Digital using the INn_MODE registers. If absent, INn_MODE
> > + registers set to 0 by default. If present, values must be specified less
> > + than or equal to the number of input singal. If values less than the
>
> Typo here should be "input signals".
Oops, Thanks! I will fix this.
Best regards,
Inha Song.
>
> > + number of input signal, elements that has not been specifed are set to 0
> > + by default.
> > +
> > - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
> > they are being externally supplied. As covered in
> > Documentation/devicetree/bindings/regulator/regulator.txt
> > --
> > 2.0.0.390.gcb682f8
> >
>
> Thanks,
> Charles
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists