lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1408026327-31437-4-git-send-email-b.zolnierkie@samsung.com>
Date:	Thu, 14 Aug 2014 16:25:25 +0200
From:	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To:	Kukjin Kim <kgene.kim@...sung.com>
Cc:	Felipe Balbi <balbi@...com>,
	Kishon Vijay Abraham I <kishon@...com>,
	Kamil Debski <k.debski@...sung.com>,
	Vivek Gautam <gautam.vivek@...sung.com>,
	Mark Brown <broonie@...aro.org>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	linux-samsung-soc@...r.kernel.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH 3/5] usb: phy: samsung: remove old USB 2.0 PHY driver

drivers/usb/phy/phy-samsung-usb2 driver got replaced by
drivers/phy/phy-samsung-usb2 one and is no longer used.

Cc: Kamil Debski <k.debski@...sung.com>
Cc: Vivek Gautam <gautam.vivek@...sung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
---
 drivers/usb/phy/Kconfig            |   8 -
 drivers/usb/phy/Makefile           |   1 -
 drivers/usb/phy/phy-samsung-usb2.c | 541 -------------------------------------
 3 files changed, 550 deletions(-)
 delete mode 100644 drivers/usb/phy/phy-samsung-usb2.c

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e253fa0..452e252 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -78,14 +78,6 @@ config SAMSUNG_USBPHY
 	  This driver provides common interface to interact, for Samsung USB 2.0 PHY
 	  driver and later for Samsung USB 3.0 PHY driver.
 
-config SAMSUNG_USB2PHY
-	tristate "Samsung USB 2.0 PHY controller Driver"
-	select SAMSUNG_USBPHY
-	select USB_PHY
-	help
-	  Enable this to support Samsung USB 2.0 (High Speed) PHY controller
-	  driver for Samsung SoCs.
-
 config SAMSUNG_USB3PHY
 	tristate "Samsung USB 3.0 PHY controller Driver"
 	select SAMSUNG_USBPHY
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 24a9133..c651005 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
 obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
-obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
 obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
deleted file mode 100644
index b3ba866..0000000
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb2.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Author: Praveen Paneri <p.paneri@...sung.com>
- *
- * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/platform_data/samsung-usbphy.h>
-
-#include "phy-samsung-usb.h"
-
-static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	if (!otg)
-		return -ENODEV;
-
-	if (!otg->host)
-		otg->host = host;
-
-	return 0;
-}
-
-static bool exynos5_phyhost_is_on(void __iomem *regs)
-{
-	u32 reg;
-
-	reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	return !(reg & HOST_CTRL0_SIDDQ);
-}
-
-static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyclk = sphy->ref_clk_freq;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-	u32 ehcictrl;
-	u32 ohcictrl;
-
-	/*
-	 * phy_usage helps in keeping usage count for phy
-	 * so that the first consumer enabling the phy is also
-	 * the last consumer to disable it.
-	 */
-
-	atomic_inc(&sphy->phy_usage);
-
-	if (exynos5_phyhost_is_on(regs)) {
-		dev_info(sphy->dev, "Already power on PHY\n");
-		return;
-	}
-
-	/* Host configuration */
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* phy reference clock configuration */
-	phyhost &= ~HOST_CTRL0_FSEL_MASK;
-	phyhost |= HOST_CTRL0_FSEL(phyclk);
-
-	/* host phy reset */
-	phyhost &= ~(HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL |
-			HOST_CTRL0_SIDDQ |
-			/* Enable normal mode of operation */
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP);
-
-	/* Link reset */
-	phyhost |= (HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST |
-			/* COMMON Block configuration during suspend */
-			HOST_CTRL0_COMMONON_N);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-	udelay(10);
-	phyhost &= ~(HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* OTG configuration */
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* phy reference clock configuration */
-	phyotg &= ~OTG_SYS_FSEL_MASK;
-	phyotg |= OTG_SYS_FSEL(phyclk);
-
-	/* Enable normal mode of operation */
-	phyotg &= ~(OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP |
-			OTG_SYS_REFCLKSEL_MASK |
-			/* COMMON Block configuration during suspend */
-			OTG_SYS_COMMON_ON);
-
-	/* OTG phy & link reset */
-	phyotg |= (OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET |
-			OTG_SYS_OTGDISABLE |
-			/* Set phy refclk */
-			OTG_SYS_REFCLKSEL_CLKCORE);
-
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-	udelay(10);
-	phyotg &= ~(OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* HSIC phy configuration */
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_PHYSWRST);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-	udelay(10);
-	phyhsic &= ~HSIC_CTRL_PHYSWRST;
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	udelay(80);
-
-	/* enable EHCI DMA burst */
-	ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
-	ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
-				HOST_EHCICTRL_ENAINCR4 |
-				HOST_EHCICTRL_ENAINCR8 |
-				HOST_EHCICTRL_ENAINCR16);
-	writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
-
-	/* set ohci_suspend_on_n */
-	ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
-	ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
-	writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
-}
-
-static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-	u32 phyclk;
-	u32 rstcon;
-
-	/* set clock frequency for PLL */
-	phyclk = sphy->ref_clk_freq;
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-	rstcon = readl(regs + SAMSUNG_RSTCON);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phyclk &= ~PHYCLK_COMMON_ON_N;
-		phypwr &= ~PHYPWR_NORMAL_MASK;
-		rstcon |= RSTCON_SWRST;
-		break;
-	case TYPE_EXYNOS4X12:
-		phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
-				PHYPWR_NORMAL_MASK_HSIC1 |
-				PHYPWR_NORMAL_MASK_PHY1);
-		rstcon |= RSTCON_HOSTPHY_SWRST;
-	case TYPE_EXYNOS4210:
-		phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
-		rstcon |= RSTCON_SWRST;
-	default:
-		break;
-	}
-
-	writel(phyclk, regs + SAMSUNG_PHYCLK);
-	/* Configure PHY0 for normal operation*/
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-	/* reset all ports of PHY and Link */
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-	udelay(10);
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
-		rstcon &= ~RSTCON_HOSTPHY_SWRST;
-	rstcon &= ~RSTCON_SWRST;
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-}
-
-static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-
-	if (atomic_dec_return(&sphy->phy_usage) > 0) {
-		dev_info(sphy->dev, "still being used\n");
-		return;
-	}
-
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_SIDDQ |
-			HSIC_CTRL_FORCESLEEP |
-			HSIC_CTRL_FORCESUSPEND);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-	phyhost |= (HOST_CTRL0_SIDDQ |
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP |
-			HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-	phyotg |= (OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-}
-
-static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phypwr |= PHYPWR_NORMAL_MASK;
-		break;
-	case TYPE_EXYNOS4X12:
-		phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
-				PHYPWR_NORMAL_MASK_HSIC1 |
-				PHYPWR_NORMAL_MASK_PHY1);
-	case TYPE_EXYNOS4210:
-		phypwr |= PHYPWR_NORMAL_MASK_PHY0;
-	default:
-		break;
-	}
-
-	/* Disable analog and otg block power */
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-}
-
-/*
- * The function passed to the usb driver for phy initialization
- */
-static int samsung_usb2phy_init(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-	int ret = 0;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	/* Enable the phy clock */
-	ret = clk_prepare_enable(sphy->clk);
-	if (ret) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return ret;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* Disable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(false);
-	else if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, false);
-
-	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
-	samsung_usbphy_cfg_sel(sphy);
-
-	/* Initialize usb phy registers */
-	sphy->drv_data->phy_enable(sphy);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	/* Disable the phy clock */
-	clk_disable_unprepare(sphy->clk);
-
-	return ret;
-}
-
-/*
- * The function passed to the usb driver for phy shutdown
- */
-static void samsung_usb2phy_shutdown(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	if (clk_prepare_enable(sphy->clk)) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* De-initialize usb phy registers */
-	sphy->drv_data->phy_disable(sphy);
-
-	/* Enable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(true);
-	else if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, true);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	clk_disable_unprepare(sphy->clk);
-}
-
-static int samsung_usb2phy_probe(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_otg *otg;
-	struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev);
-	const struct samsung_usbphy_drvdata *drv_data;
-	struct device *dev = &pdev->dev;
-	struct resource *phy_mem;
-	void __iomem	*phy_base;
-	struct clk *clk;
-	int ret;
-
-	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy_base = devm_ioremap_resource(dev, phy_mem);
-	if (IS_ERR(phy_base))
-		return PTR_ERR(phy_base);
-
-	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
-	if (!sphy)
-		return -ENOMEM;
-
-	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	drv_data = samsung_usbphy_get_driver_data(pdev);
-
-	if (drv_data->cpu_type == TYPE_EXYNOS5250)
-		clk = devm_clk_get(dev, "usbhost");
-	else
-		clk = devm_clk_get(dev, "otg");
-
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Failed to get usbhost/otg clock\n");
-		return PTR_ERR(clk);
-	}
-
-	sphy->dev = dev;
-
-	if (dev->of_node) {
-		ret = samsung_usbphy_parse_dt(sphy);
-		if (ret < 0)
-			return ret;
-	} else {
-		if (!pdata) {
-			dev_err(dev, "no platform data specified\n");
-			return -EINVAL;
-		}
-	}
-
-	sphy->plat		= pdata;
-	sphy->regs		= phy_base;
-	sphy->clk		= clk;
-	sphy->drv_data		= drv_data;
-	sphy->phy.dev		= sphy->dev;
-	sphy->phy.label		= "samsung-usb2phy";
-	sphy->phy.type		= USB_PHY_TYPE_USB2;
-	sphy->phy.init		= samsung_usb2phy_init;
-	sphy->phy.shutdown	= samsung_usb2phy_shutdown;
-
-	sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
-	if (sphy->ref_clk_freq < 0)
-		return -EINVAL;
-
-	sphy->phy.otg		= otg;
-	sphy->phy.otg->phy	= &sphy->phy;
-	sphy->phy.otg->set_host = samsung_usbphy_set_host;
-
-	spin_lock_init(&sphy->lock);
-
-	platform_set_drvdata(pdev, sphy);
-
-	return usb_add_phy_dev(&sphy->phy);
-}
-
-static int samsung_usb2phy_remove(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&sphy->phy);
-
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
-	if (sphy->sysreg)
-		iounmap(sphy->sysreg);
-
-	return 0;
-}
-
-static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
-	.cpu_type		= TYPE_S3C64XX,
-	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
-	.set_isolation		= NULL, /* TODO */
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
-	.cpu_type		= TYPE_EXYNOS4210,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
-	.cpu_type		= TYPE_EXYNOS4X12,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
-	.cpu_type		= TYPE_EXYNOS5250,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_exynos5_usb2phy_enable,
-	.phy_disable		= samsung_exynos5_usb2phy_disable,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id samsung_usbphy_dt_match[] = {
-	{
-		.compatible = "samsung,s3c64xx-usb2phy",
-		.data = &usb2phy_s3c64xx,
-	}, {
-		.compatible = "samsung,exynos4210-usb2phy",
-		.data = &usb2phy_exynos4,
-	}, {
-		.compatible = "samsung,exynos4x12-usb2phy",
-		.data = &usb2phy_exynos4x12,
-	}, {
-		.compatible = "samsung,exynos5250-usb2phy",
-		.data = &usb2phy_exynos5
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
-#endif
-
-static struct platform_device_id samsung_usbphy_driver_ids[] = {
-	{
-		.name		= "s3c64xx-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_s3c64xx,
-	}, {
-		.name		= "exynos4210-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos4,
-	}, {
-		.name		= "exynos4x12-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos4x12,
-	}, {
-		.name		= "exynos5250-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos5,
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
-
-static struct platform_driver samsung_usb2phy_driver = {
-	.probe		= samsung_usb2phy_probe,
-	.remove		= samsung_usb2phy_remove,
-	.id_table	= samsung_usbphy_driver_ids,
-	.driver		= {
-		.name	= "samsung-usb2phy",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
-	},
-};
-
-module_platform_driver(samsung_usb2phy_driver);
-
-MODULE_DESCRIPTION("Samsung USB 2.0 phy controller");
-MODULE_AUTHOR("Praveen Paneri <p.paneri@...sung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-usb2phy");
-- 
1.8.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists