[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1408367356-2628-4-git-send-email-guodong.xu@linaro.org>
Date: Mon, 18 Aug 2014 21:09:13 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linux@....linux.org.uk, sameo@...ux.intel.com,
lee.jones@...aro.org, lgirdwood@...il.com, broonie@...nel.org,
grant.likely@...aro.org, khilman@...aro.org,
haojian.zhuang@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
axel.lin@...ics.com, zhangnian@...wei.com
Cc: Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v6 3/6] regulator: core: add guard delay between calling regulator_disable and _enable
Some regulator require a minimum delay between its disable and next enable.
This is to avoid damages when out-of-range frequent disable/enable of a
single regulator can bring to the regulator chip.
Add @off_on_delay to struct regulator_desc. Device drivers' can use this field
to set this guard time.
Add @last_off_jiffy to struct regulator_dev. When @off_on_delay is set by
driver, regulator core can store its last off (disable) time into this field.
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
drivers/regulator/core.c | 31 +++++++++++++++++++++++++++++++
include/linux/regulator/driver.h | 6 ++++++
2 files changed, 37 insertions(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 4976451..7bce715 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1813,6 +1813,31 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
trace_regulator_enable(rdev_get_name(rdev));
+ if (rdev->desc->off_on_delay) {
+ /* if needed, keep a distance of off_on_delay from last time
+ * this regulator was disabled.
+ */
+ unsigned long start_jiffy = jiffies;
+ unsigned long intended, max_delay, remaining;
+
+ max_delay = usecs_to_jiffies(rdev->desc->off_on_delay);
+ intended = rdev->last_off_jiffy + max_delay;
+
+ if (time_before(start_jiffy, intended)) {
+ /* calc remaining jiffies to deal with one-time
+ * timer wrapping.
+ * in case of multiple timer wrapping, either it can be
+ * detected by out-of-range remaining, or it cannot be
+ * detected and we gets a panelty of
+ * _regulator_enable_delay().
+ */
+ remaining = intended - start_jiffy;
+ if (remaining <= max_delay)
+ _regulator_enable_delay(
+ jiffies_to_usecs(remaining));
+ }
+ }
+
if (rdev->ena_pin) {
ret = regulator_ena_gpio_ctrl(rdev, true);
if (ret < 0)
@@ -1925,6 +1950,12 @@ static int _regulator_do_disable(struct regulator_dev *rdev)
return ret;
}
+ /* cares about last_off_jiffy only if off_on_delay is required by
+ * device.
+ */
+ if (rdev->desc->off_on_delay)
+ rdev->last_off_jiffy = jiffies;
+
trace_regulator_disable_complete(rdev_get_name(rdev));
return 0;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4b62813..efe058f 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -238,6 +238,7 @@ enum regulator_type {
* @bypass_val_off: Disabling value for control when using regmap set_bypass
*
* @enable_time: Time taken for initial enable of regulator (in uS).
+ * @off_on_delay: guard time (in uS), before re-enabling a regulator
*/
struct regulator_desc {
const char *name;
@@ -276,6 +277,8 @@ struct regulator_desc {
unsigned int bypass_val_off;
unsigned int enable_time;
+
+ unsigned int off_on_delay;
};
/**
@@ -348,6 +351,9 @@ struct regulator_dev {
struct regulator_enable_gpio *ena_pin;
unsigned int ena_gpio_state:1;
+
+ /* time when this regulator was disabled last time */
+ unsigned long last_off_jiffy;
};
struct regulator_dev *
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists