| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1408381705-3623-6-git-send-email-abrestic@chromium.org>
Date: Mon, 18 Aug 2014 10:08:21 -0700
From: Andrew Bresticker <abrestic@...omium.org>
To: Stephen Warren <swarren@...dotorg.org>,
Thierry Reding <thierry.reding@...il.com>,
linux-tegra@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Jassi Brar <jassisinghbrar@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Grant Likely <grant.likely@...aro.org>,
Alan Stern <stern@...land.harvard.edu>,
Arnd Bergmann <arnd@...db.de>,
Kishon Vijay Abraham I <kishon@...com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
Andrew Bresticker <abrestic@...omium.org>
Subject: [PATCH v2 5/9] of: Add NVIDIA Tegra xHCI controller binding
Add device-tree binding documentation for the xHCI controller present
on Tegra124 and later SoCs.
Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
---
Changes from v1:
- Updated to use common mailbox bindings.
- Added remaining XUSB-related clocks and resets.
- Updated list of power supplies to be more accurate wrt to the hardware.
---
.../bindings/usb/nvidia,tegra124-xhci.txt | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
new file mode 100644
index 0000000..ed1f8cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
@@ -0,0 +1,101 @@
+NVIDIA Tegra xHCI controller
+============================
+
+The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed
+by the Tegra XUSB pad controller.
+
+Required properties:
+--------------------
+ - compatible: Should be "nvidia,tegra124-xhci".
+ - reg: Address and length of the register sets. There should be three
+ entries in the following order: xHCI host registers, FPCI registers, and
+ IPFS registers.
+ - interrupts: xHCI host interrupt.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - xusb_host
+ - xusb_host_src
+ - xusb_dev
+ - xusb_dev_src
+ - xusb_falcon_src
+ - xusb_ss
+ - xusb_ss_src
+ - xusb_ss_div2
+ - xusb_hs_src
+ - xusb_fs_src
+ - pll_u_480m
+ - clk_m
+ - pll_e
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - xusb_host
+ - xusb_dev
+ - xusb_ss
+ - xusb
+ Note that xusb_dev is the shared reset for xusb_dev and xusb_dev_src and
+ that xusb is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+ - mboxes: Must contain an entry for the XUSB host mailbox channel.
+ See ../mailbox/mailbox.txt for details.
+
+Optional properties:
+--------------------
+ - phys: Must contain an entry for each entry in phy-names.
+ See ../phy/phy-bindings.txt for details.
+ - phy-names: Should include an entry for each PHY used by the controller.
+ May be a subset of the following:
+ - utmi-{0,1,2}
+ - hsic-{0,1}
+ - usb3-{0,1}
+ - avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05V.
+ - dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05V.
+ - avdd-usb-supply: USB controller power supply. Must supply 3.3V.
+ - avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8V.
+ - avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05V.
+ - avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05V.
+ - hvdd-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3V.
+ - hvdd-pex-plle-supply: High-voltage PLLE power supply. Must supply 3.3V.
+
+Example:
+--------
+ usb@0,70090000 {
+ compatible = "nvidia,tegra124-xhci";
+ reg = <0x0 0x70090000 0x0 0x8000>,
+ <0x0 0x70098000 0x0 0x1000>,
+ <0x0 0x70099000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+ <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_DEV>,
+ <&tegra_car TEGRA124_CLK_XUSB_DEV_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+ <&tegra_car TEGRA124_CLK_CLK_M>,
+ <&tegra_car TEGRA124_CLK_PLL_E>;
+ clock-names = "xusb_host", "xusb_host_src", "xusb_dev",
+ "xusb_dev_src", "xusb_falcon_src", "xusb_ss",
+ "xusb_ss_div2", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e";
+ resets = <&tegra_car 89>, <&tegra_car 95>, <&tegra_car 156>,
+ <&tegra_car 143>;
+ reset-names = "xusb_host", "xusb_dev", "xusb_ss", "xusb";
+ mboxes = <&mbox TEGRA_XUSB_MBOX_CHAN_HOST>;
+ phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* mini-PCIe USB */
+ <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* USB A */
+ <&padctl TEGRA_XUSB_PADCTL_USB3_P0>; /* USB A */
+ phy-names = "utmi-1", "utmi-2", "usb3-0";
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-usb-supply = <&vdd_3v3_lp0>;
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-supply = <&vdd_3v3_lp0>;
+ hvdd-pex-plle-supply = <&vdd_3v3_lp0>;
+ };
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists