[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140820092319.GA20775@ci00147.xsens-tech.local>
Date: Wed, 20 Aug 2014 11:23:21 +0200
From: Frans Klaver <frans.klaver@...ns.com>
To: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
CC: <linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <tony@...mide.com>,
<balbi@...com>, Vinod Koul <vinod.koul@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
<mika.westerberg@...ux.intel.com>
Subject: Re: [PATCH 03/15] tty: serial: 8250_core: add run time pm
Hi,
On Fri, Aug 15, 2014 at 07:42:31PM +0200, Sebastian Andrzej Siewior wrote:
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -1899,12 +1984,22 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
>
> static int serial8250_get_poll_char(struct uart_port *port)
> {
> - unsigned char lsr = serial_port_in(port, UART_LSR);
> + unsigned char lsr;
> + int status;
> +
> + serial8250_rpm_get(up);
or up won't be defined below. You probably need
+ struct uart_8250_port *up = up_to_u8250p(port);
somewhere in there.
> - if (!(lsr & UART_LSR_DR))
> - return NO_POLL_CHAR;
> + lsr = serial_port_in(port, UART_LSR);
>
> - return serial_port_in(port, UART_RX);
> + if (!(lsr & UART_LSR_DR)) {
> + status = NO_POLL_CHAR;
> + goto out;
> + }
> +
> + status = serial_port_in(port, UART_RX);
> +out:
> + serial8250_rpm_put(up);
> + return status;
> }
Cheers,
Frans
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists