linux-kernel - [PATCH v5 3/4] usb: hcd: Caibrate PHY post hcd reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1408632923-19591-4-git-send-email-gautam.vivek@samsung.com>
Date:	Thu, 21 Aug 2014 20:25:22 +0530
From:	Vivek Gautam <gautam.vivek@...sung.com>
To:	linux-usb@...r.kernel.org
Cc:	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	gregkh@...uxfoundation.org, kishon@...com, kgene.kim@...sung.com,
	mathias.nyman@...el.com, stern@...land.harvard.edu,
	sergei.shtylyov@...entembedded.com,
	heikki.krogerus@...ux.intel.com, balbi@...com,
	Vivek Gautam <gautam.vivek@...sung.com>
Subject: [PATCH v5 3/4] usb: hcd: Caibrate PHY post hcd reset

Some quirky PHYs may require to be calibrated post the
hcd initialization.
The USB 3.0 DRD PHY on Exynos5420/5800 systems, coming along
with Synopsys's DWC3 controller, is one such PHY which needs
to be calibrated post xhci's reset at initialization time and
at resume time, to get the controller work at SuperSpeed.
So facilitating the HCDs to calibrate the PHY.

Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
---
 drivers/usb/core/hcd.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index c4ed66c..a42b448 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2202,6 +2202,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	struct usb_hcd	*hcd = container_of(rhdev->bus, struct usb_hcd, self);
 	int		status;
 	int		old_state = hcd->state;
+	int		ret;
 
 	dev_dbg(&rhdev->dev, "usb %sresume\n",
 			(PMSG_IS_AUTO(msg) ? "auto-" : ""));
@@ -2216,6 +2217,17 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	hcd->state = HC_STATE_RESUMING;
 	status = hcd->driver->bus_resume(hcd);
+
+	/* calibrate the phy here */
+	if (!IS_ERR(hcd->gen_phy)) {
+		ret = phy_calibrate(hcd->gen_phy);
+		if (ret < 0 && ret != -ENOTSUPP) {
+			dev_err(hcd->self.controller,
+				"failed to calibrate USB PHY\n");
+			return ret;
+		}
+	}
+
 	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (status == 0) {
 		struct usb_device *udev;
@@ -2738,6 +2750,16 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 	hcd->rh_pollable = 1;
 
+	/* calibrate the phy here */
+	if (!IS_ERR(hcd->gen_phy)) {
+		retval = phy_calibrate(hcd->gen_phy);
+		if (retval < 0 && retval != -ENOTSUPP) {
+			dev_err(hcd->self.controller,
+				"failed to calibrate USB PHY\n");
+			return retval;
+		}
+	}
+
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/