| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1408637291-18533-5-git-send-email-rkrcmar@redhat.com>
Date: Thu, 21 Aug 2014 18:08:08 +0200
From: Radim Krčmář <rkrcmar@...hat.com>
To: kvm@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Paolo Bonzini <pbonzini@...hat.com>,
Gleb Natapov <gleb@...nel.org>,
Raghavendra KT <raghavendra.kt@...ux.vnet.ibm.com>,
Vinod Chegu <chegu_vinod@...com>,
Hui-Zhi Zhao <hui-zhi.zhao@...com>,
Christian Borntraeger <borntraeger@...ibm.com>,
Lisa Mitchell <lisa.mitchell@...com>
Subject: [PATCH v3 4/7] KVM: VMX: dynamise PLE window
Window is increased on every PLE exit and decreased on every sched_in.
The idea is that we don't want to PLE exit if there is no preemption
going on.
We do this with sched_in() because it does not hold rq lock.
There are two new kernel parameters for changing the window:
ple_window_grow and ple_window_shrink
ple_window_grow affects the window on PLE exit and ple_window_shrink
does it on sched_in; depending on their value, the window is modifier
like this: (ple_window is kvm_intel's global)
ple_window_shrink/ |
ple_window_grow | PLE exit | sched_in
-------------------+--------------------+---------------------
< 1 | = ple_window | = ple_window
< ple_window | *= ple_window_grow | /= ple_window_shrink
otherwise | += ple_window_grow | -= ple_window_shrink
A third new parameter, ple_window_max, controls the maximal ple_window;
it is internally rounded down to a closest multiple of ple_window_grow.
VCPU's PLE window is never allowed below ple_window.
Signed-off-by: Radim Krčmář <rkrcmar@...hat.com>
---
arch/x86/kvm/vmx.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 85 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 18e0e52..a2fa6ba 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -125,14 +125,32 @@ module_param(nested, bool, S_IRUGO);
* Time is measured based on a counter that runs at the same rate as the TSC,
* refer SDM volume 3b section 21.6.13 & 22.1.3.
*/
-#define KVM_VMX_DEFAULT_PLE_GAP 128
-#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+#define KVM_VMX_DEFAULT_PLE_GAP 128
+#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+#define KVM_VMX_DEFAULT_PLE_WINDOW_GROW 2
+#define KVM_VMX_DEFAULT_PLE_WINDOW_SHRINK 0
+#define KVM_VMX_DEFAULT_PLE_WINDOW_MAX \
+ INT_MAX / KVM_VMX_DEFAULT_PLE_WINDOW_GROW
+
static int ple_gap = KVM_VMX_DEFAULT_PLE_GAP;
module_param(ple_gap, int, S_IRUGO);
static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
module_param(ple_window, int, S_IRUGO);
+/* Default doubles per-vcpu window every exit. */
+static int ple_window_grow = KVM_VMX_DEFAULT_PLE_WINDOW_GROW;
+module_param(ple_window_grow, int, S_IRUGO);
+
+/* Default resets per-vcpu window every exit to ple_window. */
+static int ple_window_shrink = KVM_VMX_DEFAULT_PLE_WINDOW_SHRINK;
+module_param(ple_window_shrink, int, S_IRUGO);
+
+/* Default is to compute the maximum so we can never overflow. */
+static int ple_window_actual_max = KVM_VMX_DEFAULT_PLE_WINDOW_MAX;
+static int ple_window_max = KVM_VMX_DEFAULT_PLE_WINDOW_MAX;
+module_param(ple_window_max, int, S_IRUGO);
+
extern const ulong vmx_return;
#define NR_AUTOLOAD_MSRS 8
@@ -5679,12 +5697,73 @@ out:
return ret;
}
+static int __grow_ple_window(int val)
+{
+ if (ple_window_grow < 1)
+ return ple_window;
+
+ val = min(val, ple_window_actual_max);
+
+ if (ple_window_grow < ple_window)
+ val *= ple_window_grow;
+ else
+ val += ple_window_grow;
+
+ return val;
+}
+
+static int __shrink_ple_window(int val, int modifier, int minimum)
+{
+ if (modifier < 1)
+ return ple_window;
+
+ if (modifier < ple_window)
+ val /= modifier;
+ else
+ val -= modifier;
+
+ return max(val, minimum);
+}
+
+static void grow_ple_window(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ vmx->ple_window = __grow_ple_window(vmx->ple_window);
+}
+
+static void shrink_ple_window(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ vmx->ple_window = __shrink_ple_window(vmx->ple_window,
+ ple_window_shrink, ple_window);
+}
+
+/*
+ * ple_window_actual_max is computed to be one grow_ple_window() below
+ * ple_window_max. (See __grow_ple_window for the reason.)
+ * This prevents overflows, because ple_window_max is int.
+ * ple_window_max effectively rounded down to a multiple of ple_window_grow in
+ * this process.
+ * ple_window_max is also prevented from setting vmx->ple_window < ple_window.
+ */
+static void update_ple_window_actual_max(void)
+{
+ ple_window_actual_max =
+ __shrink_ple_window(max(ple_window_max, ple_window),
+ ple_window_grow, INT_MIN);
+}
+
/*
* Indicate a busy-waiting vcpu in spinlock. We do not enable the PAUSE
* exiting, so only get here on cpu with PAUSE-Loop-Exiting.
*/
static int handle_pause(struct kvm_vcpu *vcpu)
{
+ if (ple_gap)
+ grow_ple_window(vcpu);
+
skip_emulated_instruction(vcpu);
kvm_vcpu_on_spin(vcpu);
@@ -8854,6 +8933,8 @@ static int vmx_check_intercept(struct kvm_vcpu *vcpu,
void vmx_sched_in(struct kvm_vcpu *vcpu, int cpu)
{
+ if (ple_gap)
+ shrink_ple_window(vcpu);
}
static struct kvm_x86_ops vmx_x86_ops = {
@@ -9077,6 +9158,8 @@ static int __init vmx_init(void)
} else
kvm_disable_tdp();
+ update_ple_window_actual_max();
+
return 0;
out7:
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists