| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1408789763-16369-1-git-send-email-zyw@rock-chips.com>
Date: Sat, 23 Aug 2014 18:29:23 +0800
From: Chris Zhong <zyw@...k-chips.com>
To: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
sameo@...ux.intel.com, lee.jones@...aro.org, lgirdwood@...il.com,
broonie@...nel.org, a.zummo@...ertech.it, mturquette@...aro.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
rtc-linux@...glegroups.com, grant.likely@...aro.org,
hl@...k-chips.com, huangtao@...k-chips.com, cf@...k-chips.com,
zhangqing@...k-chips.com, xxx@...k-chips.com,
dianders@...omium.org, heiko@...ech.de, olof@...om.net,
sonnyrao@...omium.org, dtor@...omium.org,
javier.martinez@...labora.co.uk, kever.yang@...k-chips.com,
Chris Zhong <zyw@...k-chips.com>
Subject: [PATCH v3 1/5] MFD: Add rk808 device tree bindings documentation
rk808.txt: Add device tree bindings for rockchip's rk808 pmic.
Signed-off-by: Chris Zhong <zyw@...k-chips.com>
---
Changes in v4:
Adviced by doug
- add "clock-output-names" propertiey
- add a header file "rockchip,rk808.h"
Changes in v3:
- fix compile err
Changes in v2:
Adviced by javier.martinez
- separated from rtc-rk808.c
Documentation/devicetree/bindings/mfd/rk808.txt | 133 +++++++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
new file mode 100644
index 0000000..a9368fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -0,0 +1,133 @@
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+- #clock-cells: the value should be 1
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+ default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+
+Example:
+rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ reg = <0x1b>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k0", "xin32k1";
+ rockchip,system-power-controller;
+
+ regulators {
+ rk808_dcdc1_reg: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd_arm";
+ };
+
+ rk808_dcdc2_reg: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ };
+
+ rk808_dcdc3_reg: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd_ddr";
+ };
+
+ rk808_dcdc4_reg: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio";
+ };
+
+ rk808_ldo1_reg: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo2_reg: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo3_reg: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "LDO_REG3";
+ };
+
+ rk808_ldo4_reg: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ rk808_ldo5_reg: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo6_reg: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ rk808_ldo7_reg: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ rk808_ldo8_reg: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_switch1_reg: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ rk808_switch2_reg: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists