| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1409016665-3824-3-git-send-email-cw00.choi@samsung.com>
Date: Tue, 26 Aug 2014 10:31:03 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: eduardo.valentin@...com, amit.daniel@...sung.com,
rui.zhang@...el.com
Cc: kgene.kim@...sung.com, ch.naveen@...sung.com,
kyungmin.park@...sung.com, b.zolnierkie@...sung.com,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Chanwoo Choi <cw00.choi@...sung.com>,
Eduardo Valentin <edubezval@...il.com>
Subject: [PATCHv5 2/4] thermal: exynos: Add support for many TRIMINFO_CTRL
registers
This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
shift/mask bit operation to set RELOAD feature instead of static value.
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
Cc: Zhang Rui <rui.zhang@...el.com>
Cc: Eduardo Valentin <edubezval@...il.com>
Cc: Amit Daniel Kachhap <amit.daniel@...sung.com>
Reviewed-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
---
drivers/thermal/samsung/exynos_thermal_common.h | 1 +
drivers/thermal/samsung/exynos_tmu.c | 15 ++++++++++++---
drivers/thermal/samsung/exynos_tmu.h | 9 ++++-----
drivers/thermal/samsung/exynos_tmu_data.c | 5 +++--
drivers/thermal/samsung/exynos_tmu_data.h | 2 +-
5 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 3eb2ed9..b211976 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -28,6 +28,7 @@
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
#define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14..64c702a 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
int ret = 0, threshold_code, i, trigger_levs = 0;
@@ -164,8 +164,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
if (pdata->cal_mode == HW_MODE)
goto skip_calib_data;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 1b4a644..e051540 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -85,8 +85,7 @@ enum soc_type {
* @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
* @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
+ * @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
@@ -151,9 +150,8 @@ struct exynos_tmu_registers {
u32 triminfo_25_shift;
u32 triminfo_85_shift;
- u32 triminfo_ctrl;
- u32 triminfo_ctrl1;
- u32 triminfo_reload_shift;
+ u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+ u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
@@ -295,6 +293,7 @@ struct exynos_tmu_platform_data {
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
+ u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
enum calibration_mode cal_mode;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 8c0ada2..0a13f2b 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -184,8 +184,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
- .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
+ .triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
@@ -252,6 +252,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index f0979e5..05728f8 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -63,7 +63,7 @@
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
#define EXYNOS_TMU_RISE_INT_MASK 0x111
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists