lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 28 Aug 2014 23:46:49 +0800
From:	Ching Huang <ching2048@...ca.com.tw>
To:	Tomas Henzl <thenzl@...hat.com>
Cc:	hch@...radead.org, jbottomley@...allels.com,
	dan.carpenter@...cle.com, linux-scsi@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 16/17] arcmsr: support new adapter ARC12x4 series

On Wed, 2014-08-27 at 16:00 +0200, Tomas Henzl wrote:
> On 08/19/2014 09:25 AM, Ching Huang wrote:
> > From: Ching Huang <ching2048@...ca.com.tw>
> >
> > Add code for supporting Areca new Raid adapter ARC12x4 series.
> >
> > Signed-off-by: Ching Huang <ching2048@...ca.com.tw>
> > ---
> 
> Hi Ching,
> please look at the comments below -
> 
> >  }
> > @@ -1039,7 +1147,60 @@ static void arcmsr_done4abort_postqueue(
> >  			error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1) ? true : false;
> >  			arcmsr_drain_donequeue(acb, pCCB, error);
> >  		}
> > -	}
> > +		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D: {
> > +		struct MessageUnit_D  *pmu = acb->pmuD;
> > +		uint32_t ccb_cdb_phy, outbound_write_pointer;
> > +		uint32_t doneq_index, index_stripped, addressLow, residual;
> > +		bool error;
> > +		struct CommandControlBlock *pCCB;
> 
> I have noticed this^ in this driver already before. Sometimes it makes sense
> when a variable is declared in a 'case' block but often it is just
> a waste of space. In this function this is the third 'bool error' declared.
> Is there a reason for this style (this function is not the worst case) ?
Yea, there is many variable are duplicate declaration, I will clean it up.
> 
> > +		outbound_write_pointer = pmu->done_qbuffer[0].addressLow + 1;
> > +		doneq_index = pmu->doneq_index;
> > +		residual = atomic_read(&acb->ccboutstandingcount);
> > +		for (i = 0; i < residual; i++) {
> > +			while ((doneq_index & 0xFFF) !=
> > +				(outbound_write_pointer & 0xFFF)) {
> > +				if (doneq_index & 0x4000) {
> > +					index_stripped = doneq_index & 0xFFF;
> > +					index_stripped += 1;
> > +					index_stripped %=
> > +						ARCMSR_MAX_ARC1214_DONEQUEUE;
> > +					pmu->doneq_index = index_stripped ?
> > +						(index_stripped | 0x4000) :
> > +						(index_stripped + 1);
> > +				} else {
> > +					index_stripped = doneq_index;
> > +					index_stripped += 1;
> > +					index_stripped %=
> > +						ARCMSR_MAX_ARC1214_DONEQUEUE;
> > +					pmu->doneq_index = index_stripped ?
> > +						index_stripped :
> > +						((index_stripped | 0x4000) + 1);
> > +				}
> > +				doneq_index = pmu->doneq_index;
> > +				addressLow = pmu->done_qbuffer[doneq_index &
> > +					0xFFF].addressLow;
> > +				ccb_cdb_phy = (addressLow & 0xFFFFFFF0);
> > +				pARCMSR_CDB = (struct  ARCMSR_CDB *)
> > +					(acb->vir2phy_offset + ccb_cdb_phy);
> > +				pCCB = container_of(pARCMSR_CDB,
> > +					struct CommandControlBlock, arcmsr_cdb);
> > +				error = (addressLow &
> > +					ARCMSR_CCBREPLY_FLAG_ERROR_MODE1) ?
> > +					true : false;
> > +				arcmsr_drain_donequeue(acb, pCCB, error);
> > +				writel(doneq_index, pmu->outboundlist_read_pointer);
> > +			}
> > +			mdelay(10);
> > +			outbound_write_pointer =
> > +				pmu->done_qbuffer[0].addressLow + 1;
> > +			doneq_index = pmu->doneq_index;
> > +		}
> > +		pmu->postq_index = 0;
> > +		pmu->doneq_index = 0x40FF;
> > +		}
> > +		break;
> >  	}
> >  }
> ...
> 
> >
> >  
> > @@ -1256,6 +1424,38 @@ static void arcmsr_post_ccb(struct Adapt
> >  			writel(ccb_post_stamp, &phbcmu->inbound_queueport_low);
> >  		}
> >  		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D: {
> > +		struct MessageUnit_D  *pmu = acb->pmuD;
> > +		u16 index_stripped;
> > +		u16 postq_index;
		u16 postq_index, toggle;
> > +		unsigned long flags;
> > +		struct InBound_SRB *pinbound_srb;
> > +
> > +		spin_lock_irqsave(&acb->postq_lock, flags);
> > +		postq_index = pmu->postq_index;
> > +		pinbound_srb = (struct InBound_SRB *)&(pmu->post_qbuffer[postq_index & 0xFF]);
> > +		pinbound_srb->addressHigh = dma_addr_hi32(cdb_phyaddr);
> > +		pinbound_srb->addressLow = dma_addr_lo32(cdb_phyaddr);
> > +		pinbound_srb->length = ccb->arc_cdb_size >> 2;
> > +		arcmsr_cdb->msgContext = dma_addr_lo32(cdb_phyaddr);
> > +		if (postq_index & 0x4000) {
> > +			index_stripped = postq_index & 0xFF;
> > +			index_stripped += 1;
> > +			index_stripped %= ARCMSR_MAX_ARC1214_POSTQUEUE;
> > +			pmu->postq_index = index_stripped ?
> > +				(index_stripped | 0x4000) : index_stripped;
> > +		} else {
> > +			index_stripped = postq_index;
> > +			index_stripped += 1;
> > +			index_stripped %= ARCMSR_MAX_ARC1214_POSTQUEUE;
> > +			pmu->postq_index = index_stripped ? index_stripped :
> > +				(index_stripped | 0x4000);
> > +		}
> 
> The code above could be a bit easier -
Yea. I simplify it to following.
		toggle = postq_index & 0x4000;
		index_stripped = (postq_index & 0xFF) + 1;
		index_stripped %= ARCMSR_MAX_ARC1214_POSTQUEUE;
		pmu->postq_index = index_stripped ? (index_stripped | toggle) :
			(index_stripped | (toggle ^ 0x4000));
> 		
> 		arcmsr_cdb->msgContext = dma_addr_lo32(cdb_phyaddr);
>                 index_stripped = postq_index + 1;
>                 index_stripped &= (ARCMSR_MAX_ARC1214_POSTQUEUE - 1);
> 
>                 if (postq_index & 0x4000)
>                         pmu->postq_index = index_stripped ?
>                                 (index_stripped | 0x4000) : index_stripped;
>                 else
>                         pmu->postq_index = index_stripped ?
>                                  index_stripped : (index_stripped | 0x4000);
> or am I wrong? This is repeated in the code many times
Yea. one for postQueue and 3 times for doneQueue. They all can be simplified as above.
>  
> 
> > +		writel(postq_index, pmu->inboundlist_write_pointer);
> > +		spin_unlock_irqrestore(&acb->postq_lock, flags);
> > +		break;
> > +		}
> >  	}
> >  }
> >  
> ...
> > +static int arcmsr_hbaD_polling_ccbdone(struct AdapterControlBlock *acb,
> > +				struct CommandControlBlock *poll_ccb)
> > +{
> > +	bool error;
> > +	uint32_t poll_ccb_done = 0, poll_count = 0, flag_ccb, ccb_cdb_phy;
> > +	int rtn, doneq_index, index_stripped, outbound_write_pointer;
> > +	unsigned long flags;
> > +	struct ARCMSR_CDB *arcmsr_cdb;
> > +	struct CommandControlBlock *pCCB;
> > +	struct MessageUnit_D *pmu = acb->pmuD;
> > +
> > +polling_hbaD_ccb_retry:
> > +	poll_count++;
> > +	while (1) {
> > +		outbound_write_pointer = pmu->done_qbuffer[0].addressLow + 1;
> > +		doneq_index = pmu->doneq_index;
> 
> You seem to protect the doneq with a spinlock on some other places, arcmsr_hbaD_postqueue_isr
> and below in this function. Why not here, is it intentional? 
Before came here, the h/w interrupt was disabled. Hence, don't worry about other thread
to change doneq_index.
> 
> > +		if ((outbound_write_pointer & 0xFFF) == (doneq_index & 0xFFF)) {
> > +			if (poll_ccb_done) {
> > +				rtn = SUCCESS;
> > +				break;
> > +			} else {
> > +				msleep(25);
> > +				if (poll_count > 40) {
> > +					rtn = FAILED;
> > +					break;
> > +				}
> > +				goto polling_hbaD_ccb_retry;
> > +			}
> > +		}
> > +		spin_lock_irqsave(&acb->doneq_lock, flags);
> > +		if (doneq_index & 0x4000) {
> > +			index_stripped = doneq_index & 0xFFF;
> > +			index_stripped += 1;
> > +			index_stripped %= ARCMSR_MAX_ARC1214_DONEQUEUE;
> > +			pmu->doneq_index = index_stripped ?
> > +				(index_stripped | 0x4000) :
> > +				(index_stripped + 1);
> > +		} else {
> > +			index_stripped = doneq_index;
> > +			index_stripped += 1;
> > +			index_stripped %= ARCMSR_MAX_ARC1214_DONEQUEUE;
> > +			pmu->doneq_index = index_stripped ? index_stripped :
> > +				((index_stripped | 0x4000) + 1);
> > +		}
> > +		spin_unlock_irqrestore(&acb->doneq_lock, flags);
> > +		doneq_index = pmu->doneq_index;
> > +		flag_ccb = pmu->done_qbuffer[doneq_index & 0xFFF].addressLow;
> > +		ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);
> > +		arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset +
> > +			ccb_cdb_phy);
> > +		pCCB = container_of(arcmsr_cdb, struct CommandControlBlock,
> > +			arcmsr_cdb);
> > +		poll_ccb_done |= (pCCB == poll_ccb) ? 1 : 0;
> > +		if ((pCCB->acb != acb) ||
> > +			(pCCB->startdone != ARCMSR_CCB_START)) {
> > +			if (pCCB->startdone == ARCMSR_CCB_ABORTED) {
> > +				pr_notice("arcmsr%d: scsi id = %d "
> > +					"lun = %d ccb = '0x%p' poll command "
> > +					"abort successfully\n"
> > +					, acb->host->host_no
> > +					, pCCB->pcmd->device->id
> > +					, (u32)pCCB->pcmd->device->lun
> > +					, pCCB);
> > +				pCCB->pcmd->result = DID_ABORT << 16;
> > +				arcmsr_ccb_complete(pCCB);
> > +				continue;
> > +			}
> > +			pr_notice("arcmsr%d: polling an illegal "
> > +				"ccb command done ccb = '0x%p' "
> > +				"ccboutstandingcount = %d\n"
> > +				, acb->host->host_no
> > +				, pCCB
> > +				, atomic_read(&acb->ccboutstandingcount));
> > +			continue;
> > +		}
> > +		error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1)
> > +			? true : false;
> > +		arcmsr_report_ccb_state(acb, pCCB, error);
> > +	}
> > +	return rtn;
> > +}
> > +
> >  static int arcmsr_polling_ccbdone(struct AdapterControlBlock *acb,
> >  					struct CommandControlBlock *poll_ccb)
> >  {
> > @@ -2711,6 +3280,10 @@ static int arcmsr_polling_ccbdone(struct
> >  	case ACB_ADAPTER_TYPE_C: {
> >  		rtn = arcmsr_hbaC_polling_ccbdone(acb, poll_ccb);
> >  		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D:
> > +		rtn = arcmsr_hbaD_polling_ccbdone(acb, poll_ccb);
> > +		break;
> >  	}
> >  	return rtn;
> >  }
> > @@ -2728,6 +3301,7 @@ static int arcmsr_iop_confirm(struct Ada
> >  	*/
> >  	switch (acb->adapter_type) {
> >  		case ACB_ADAPTER_TYPE_B:
> > +		case ACB_ADAPTER_TYPE_D:
> >  			dma_coherent_handle = acb->dma_coherent_handle2;
> >  			break;
> >  		default:
> > @@ -2817,6 +3391,27 @@ static int arcmsr_iop_confirm(struct Ada
> >  			}
> >  		}
> >  		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D: {
> > +		uint32_t __iomem *rwbuffer;
> > +		struct MessageUnit_D *reg = acb->pmuD;
> > +		reg->postq_index = 0;
> > +		reg->doneq_index = 0;
> > +		rwbuffer = reg->msgcode_rwbuffer;
> > +		writel(ARCMSR_SIGNATURE_SET_CONFIG, rwbuffer++);
> > +		writel(cdb_phyaddr_hi32, rwbuffer++);
> > +		writel(cdb_phyaddr, rwbuffer++);
> > +		writel(cdb_phyaddr + (ARCMSR_MAX_ARC1214_POSTQUEUE *
> > +			sizeof(struct InBound_SRB)), rwbuffer++);
> > +		writel(0x100, rwbuffer);
> > +		writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, reg->inbound_msgaddr0);
> > +		if (!arcmsr_hbaD_wait_msgint_ready(acb)) {
> > +			pr_notice("arcmsr%d: 'set command Q window' timeout\n",
> > +				acb->host->host_no);
> > +			return 1;
> > +		}
> > +		}
> > +		break;
> >  	}
> >  	return 0;
> >  }
> > @@ -2848,6 +3443,15 @@ static void arcmsr_wait_firmware_ready(s
> >  			firmware_state = readl(&reg->outbound_msgaddr1);
> >  		} while ((firmware_state & ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK) == 0);
> >  		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D: {
> > +		struct MessageUnit_D *reg = acb->pmuD;
> > +		do {
> > +			firmware_state = readl(reg->outbound_msgaddr1);
> > +		} while ((firmware_state &
> > +			ARCMSR_ARC1214_MESSAGE_FIRMWARE_OK) == 0);
> > +		}
> > +		break;
> >  	}
> >  }
> >  
> > @@ -2918,6 +3522,35 @@ static void arcmsr_hbaC_request_device_m
> >  	return;
> >  }
> >  
> > +static void arcmsr_hbaD_request_device_map(struct AdapterControlBlock *acb)
> > +{
> > +	struct MessageUnit_D *reg = acb->pmuD;
> > +
> > +	if (unlikely(atomic_read(&acb->rq_map_token) == 0) ||
> > +		((acb->acb_flags & ACB_F_BUS_RESET) != 0) ||
> > +		((acb->acb_flags & ACB_F_ABORT) != 0)) {
> > +		mod_timer(&acb->eternal_timer,
> > +			jiffies + msecs_to_jiffies(6 * HZ));
> > +	} else {
> > +		acb->fw_flag = FW_NORMAL;
> > +		if (atomic_read(&acb->ante_token_value) ==
> > +			atomic_read(&acb->rq_map_token)) {
> > +			atomic_set(&acb->rq_map_token, 16);
> > +		}
> > +		atomic_set(&acb->ante_token_value,
> > +			atomic_read(&acb->rq_map_token));
> > +		if (atomic_dec_and_test(&acb->rq_map_token)) {
> > +			mod_timer(&acb->eternal_timer, jiffies +
> > +				msecs_to_jiffies(6 * HZ));
> > +			return;
> > +		}
> > +		writel(ARCMSR_INBOUND_MESG0_GET_CONFIG,
> > +			reg->inbound_msgaddr0);
> > +		mod_timer(&acb->eternal_timer, jiffies +
> > +			msecs_to_jiffies(6 * HZ));
> > +	}
> > +}
> > +
> >  static void arcmsr_request_device_map(unsigned long pacb)
> >  {
> >  	struct AdapterControlBlock *acb = (struct AdapterControlBlock *)pacb;
> > @@ -2933,6 +3566,10 @@ static void arcmsr_request_device_map(un
> >  		case ACB_ADAPTER_TYPE_C: {
> >  			arcmsr_hbaC_request_device_map(acb);
> >  		}
> > +		break;
> > +		case ACB_ADAPTER_TYPE_D:
> > +			arcmsr_hbaD_request_device_map(acb);
> > +		break;
> >  	}
> >  }
> >  
> > @@ -2970,6 +3607,19 @@ static void arcmsr_hbaC_start_bgrb(struc
> >  	}
> >  	return;
> >  }
> > +
> > +static void arcmsr_hbaD_start_bgrb(struct AdapterControlBlock *pACB)
> > +{
> > +	struct MessageUnit_D *pmu = pACB->pmuD;
> > +
> > +	pACB->acb_flags |= ACB_F_MSG_START_BGRB;
> > +	writel(ARCMSR_INBOUND_MESG0_START_BGRB, pmu->inbound_msgaddr0);
> > +	if (!arcmsr_hbaD_wait_msgint_ready(pACB)) {
> > +		pr_notice("arcmsr%d: wait 'start adapter "
> > +			"background rebulid' timeout\n", pACB->host->host_no);
> > +	}
> > +}
> > +
> >  static void arcmsr_start_adapter_bgrb(struct AdapterControlBlock *acb)
> >  {
> >  	switch (acb->adapter_type) {
> > @@ -2981,6 +3631,10 @@ static void arcmsr_start_adapter_bgrb(st
> >  		break;
> >  	case ACB_ADAPTER_TYPE_C:
> >  		arcmsr_hbaC_start_bgrb(acb);
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D:
> > +		arcmsr_hbaD_start_bgrb(acb);
> > +		break;
> >  	}
> >  }
> >  
> > @@ -3026,6 +3680,29 @@ static void arcmsr_clear_doorbell_queue_
> >  				break;
> >  		}
> >  		}
> > +		break;
> > +	case ACB_ADAPTER_TYPE_D: {
> > +		struct MessageUnit_D *reg = acb->pmuD;
> > +		uint32_t outbound_doorbell, i;
> > +		/* empty doorbell Qbuffer if door bell ringed */
> > +		outbound_doorbell = readl(reg->outbound_doorbell);
> > +		writel(outbound_doorbell, reg->outbound_doorbell);
> > +		writel(ARCMSR_ARC1214_DRV2IOP_DATA_OUT_READ,
> > +			reg->inbound_doorbell);
> > +		for (i = 0; i < 200; i++) {
> > +			msleep(20);
> > +			outbound_doorbell = readl(reg->outbound_doorbell);
> > +			if (outbound_doorbell &
> > +				ARCMSR_ARC1214_IOP2DRV_DATA_WRITE_OK) {
> > +				writel(outbound_doorbell,
> > +					reg->outbound_doorbell);
> > +				writel(ARCMSR_ARC1214_DRV2IOP_DATA_OUT_READ,
> > +					reg->inbound_doorbell);
> > +			} else
> > +				break;
> > +		}
> > +		}
> > +		break;
> >  	}
> >  }
> >  
> > @@ -3056,6 +3733,7 @@ static void arcmsr_hardware_reset(struct
> >  	int i, count = 0;
> >  	struct MessageUnit_A __iomem *pmuA = acb->pmuA;
> >  	struct MessageUnit_C __iomem *pmuC = acb->pmuC;
> > +	struct MessageUnit_D *pmuD = acb->pmuD;
> >  
> >  	/* backup pci config data */
> >  	printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no);
> > @@ -3076,6 +3754,8 @@ static void arcmsr_hardware_reset(struct
> >  			writel(0xD, &pmuC->write_sequence);
> >  		} while (((readl(&pmuC->host_diagnostic) & ARCMSR_ARC1880_DiagWrite_ENABLE) == 0) && (count < 5));
> >  		writel(ARCMSR_ARC1880_RESET_ADAPTER, &pmuC->host_diagnostic);
> > +	} else if ((acb->dev_id == 0x1214)) {
> > +		writel(0x20, pmuD->reset_request);
> >  	} else {
> >  		pci_write_config_byte(acb->pdev, 0x84, 0x20);
> >  	}
> > @@ -3272,6 +3952,66 @@ sleep:
> >  			}
> >  			break;
> >  		}
> > +		case ACB_ADAPTER_TYPE_D: {
> > +			if (acb->acb_flags & ACB_F_BUS_RESET) {
> > +				long timeout;
> > +				pr_notice("arcmsr: there is an bus reset"
> > +					" eh proceeding.......\n");
> > +				timeout = wait_event_timeout(wait_q, (acb->acb_flags
> > +					& ACB_F_BUS_RESET) == 0, 220 * HZ);
> > +				if (timeout)
> > +					return SUCCESS;
> > +			}
> > +			acb->acb_flags |= ACB_F_BUS_RESET;
> > +			if (!arcmsr_iop_reset(acb)) {
> > +				struct MessageUnit_D *reg;
> > +				reg = acb->pmuD;
> > +				arcmsr_hardware_reset(acb);
> > +				acb->acb_flags &= ~ACB_F_IOP_INITED;
> > +			nap:
> > +				ssleep(ARCMSR_SLEEPTIME);
> > +				if ((readl(reg->sample_at_reset) & 0x80) != 0) {
> > +					pr_err("arcmsr%d: waiting for "
> > +						"hw bus reset return, retry=%d\n",
> > +						acb->host->host_no, retry_count);
> > +					if (retry_count > ARCMSR_RETRYCOUNT) {
> > +						acb->fw_flag = FW_DEADLOCK;
> > +						pr_err("arcmsr%d: waiting for hw bus"
> > +							" reset return, "
> > +							"RETRY TERMINATED!!\n",
> > +							acb->host->host_no);
> > +						return FAILED;
> > +					}
> > +					retry_count++;
> > +					goto nap;
> > +				}
> > +				acb->acb_flags |= ACB_F_IOP_INITED;
> > +				/* disable all outbound interrupt */
> > +				intmask_org = arcmsr_disable_outbound_ints(acb);
> > +				arcmsr_get_firmware_spec(acb);
> > +				arcmsr_start_adapter_bgrb(acb);
> > +				arcmsr_clear_doorbell_queue_buffer(acb);
> > +				arcmsr_enable_outbound_ints(acb, intmask_org);
> > +				atomic_set(&acb->rq_map_token, 16);
> > +				atomic_set(&acb->ante_token_value, 16);
> > +				acb->fw_flag = FW_NORMAL;
> > +				mod_timer(&acb->eternal_timer,
> > +					jiffies + msecs_to_jiffies(6 * HZ));
> > +				acb->acb_flags &= ~ACB_F_BUS_RESET;
> > +				rtn = SUCCESS;
> > +				pr_err("arcmsr: scsi bus reset "
> > +					"eh returns with success\n");
> > +			} else {
> > +				acb->acb_flags &= ~ACB_F_BUS_RESET;
> > +				atomic_set(&acb->rq_map_token, 16);
> > +				atomic_set(&acb->ante_token_value, 16);
> > +				acb->fw_flag = FW_NORMAL;
> > +				mod_timer(&acb->eternal_timer,
> > +					jiffies + msecs_to_jiffies(6 * HZ));
> > +				rtn = SUCCESS;
> > +			}
> > +			break;
> > +		}
> >  	}
> >  	return rtn;
> >  }
> > @@ -3348,6 +4088,7 @@ static const char *arcmsr_info(struct Sc
> >  	case PCI_DEVICE_ID_ARECA_1280:
> >  		type = "SATA";
> >  		break;
> > +	case PCI_DEVICE_ID_ARECA_1214:
> >  	case PCI_DEVICE_ID_ARECA_1380:
> >  	case PCI_DEVICE_ID_ARECA_1381:
> >  	case PCI_DEVICE_ID_ARECA_1680:
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ