| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1409216559-22402-5-git-send-email-cw00.choi@samsung.com>
Date: Thu, 28 Aug 2014 18:02:38 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: a.zummo@...ertech.it
Cc: kgene.kim@...sung.com, akpm@...ux-foundation.org,
kyungmin.park@...sung.com, rtc-linux@...glegroups.com,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCHv3 4/5] rtc: s3c: Add support for RTC of Exynos3250 SoC
This patch add support for RTC of Exynos3250 SoC. The Exynos3250 needs source
clock(32.768KHz) for RTC block. If source clock of RTC is registerd on clock
list of common clk framework, Exynos RTC drvier have to control this clock.
Clock list for s3c-rtc device:
- rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC.
- rtc_src : XrtcXTI is 32.768.kHz source clock for RTC.
(XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and
XRTCXTO pins. RTC uses this clock as the source of a real-time clock.)
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
Cc: Alessandro Zummo <a.zummo@...ertech.it>
Cc: Kukjin Kim <kgene.kim@...sung.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>
---
Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 1 +
drivers/rtc/rtc-s3c.c | 93 ++++++++++++++++++++++-
2 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index 06db446..ab757b84 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -6,6 +6,7 @@ Required properties:
* "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc.
* "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc.
* "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+ * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: Two interrupt numbers to the cpu should be specified. First
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 0d90892..a6b1252 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -38,6 +38,7 @@ struct s3c_rtc {
void __iomem *base;
struct clk *rtc_clk;
+ struct clk *rtc_src_clk;
bool enabled;
struct s3c_rtc_data *data;
@@ -54,6 +55,7 @@ struct s3c_rtc {
struct s3c_rtc_data {
int max_user_freq;
+ bool needs_src_clk;
void (*irq_handler) (struct s3c_rtc *info, int mask);
void (*set_freq) (struct s3c_rtc *info, int freq);
@@ -73,10 +75,14 @@ static void s3c_rtc_alarm_clk_enable(struct s3c_rtc *info, bool enable)
if (enable) {
if (!info->enabled) {
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
info->enabled = true;
}
} else {
if (info->enabled) {
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
info->enabled = false;
}
@@ -114,12 +120,16 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
dev_dbg(info->dev, "%s: aie=%d\n", __func__, enabled);
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
tmp = readb(info->base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
if (enabled)
tmp |= S3C2410_RTCALM_ALMEN;
writeb(tmp, info->base + S3C2410_RTCALM);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
s3c_rtc_alarm_clk_enable(info, enabled);
@@ -134,12 +144,16 @@ static int s3c_rtc_setfreq(struct s3c_rtc *info, int freq)
return -EINVAL;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
spin_lock_irq(&info->pie_lock);
if (info->data->set_freq)
info->data->set_freq(info, freq);
spin_unlock_irq(&info->pie_lock);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -152,6 +166,9 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
unsigned int have_retried = 0;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
+
retry_get_time:
rtc_tm->tm_min = readb(info->base + S3C2410_RTCMIN);
rtc_tm->tm_hour = readb(info->base + S3C2410_RTCHOUR);
@@ -185,6 +202,8 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_mon -= 1;
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return rtc_valid_tm(rtc_tm);
@@ -207,6 +226,8 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
}
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
writeb(bin2bcd(tm->tm_sec), info->base + S3C2410_RTCSEC);
writeb(bin2bcd(tm->tm_min), info->base + S3C2410_RTCMIN);
@@ -215,6 +236,8 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
writeb(bin2bcd(tm->tm_mon + 1), info->base + S3C2410_RTCMON);
writeb(bin2bcd(year), info->base + S3C2410_RTCYEAR);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -227,6 +250,9 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned int alm_en;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
+
alm_tm->tm_sec = readb(info->base + S3C2410_ALMSEC);
alm_tm->tm_min = readb(info->base + S3C2410_ALMMIN);
alm_tm->tm_hour = readb(info->base + S3C2410_ALMHOUR);
@@ -278,7 +304,10 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
else
alm_tm->tm_year = -1;
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
+
return 0;
}
@@ -289,6 +318,9 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned int alrm_en;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
+
dev_dbg(dev, "s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alrm->enabled,
1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
@@ -318,6 +350,8 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
s3c_rtc_setaie(dev, alrm->enabled);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -328,10 +362,14 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
struct s3c_rtc *info = dev_get_drvdata(dev);
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
if (info->data->enable_tick)
info->data->enable_tick(info, seq);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -351,6 +389,8 @@ static void s3c24xx_rtc_enable(struct s3c_rtc *info)
unsigned int con, tmp;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
con = readw(info->base + S3C2410_RTCCON);
/* re-enable the device, and check it is ok */
@@ -378,6 +418,8 @@ static void s3c24xx_rtc_enable(struct s3c_rtc *info)
info->base + S3C2410_RTCCON);
}
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
}
@@ -386,6 +428,8 @@ static void s3c24xx_rtc_disable(struct s3c_rtc *info)
unsigned int con;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
con = readw(info->base + S3C2410_RTCCON);
con &= ~S3C2410_RTCCON_RTCEN;
@@ -395,6 +439,8 @@ static void s3c24xx_rtc_disable(struct s3c_rtc *info)
con &= ~S3C2410_TICNT_ENABLE;
writeb(con, info->base + S3C2410_TICNT);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
}
@@ -403,12 +449,16 @@ static void s3c6410_rtc_disable(struct s3c_rtc *info)
unsigned int con;
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
con = readw(info->base + S3C2410_RTCCON);
con &= ~S3C64XX_RTCCON_TICEN;
con &= ~S3C2410_RTCCON_RTCEN;
writew(con, info->base + S3C2410_RTCCON);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
}
@@ -480,11 +530,19 @@ static int s3c_rtc_probe(struct platform_device *pdev)
info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(info->rtc_clk)) {
- dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ dev_err(&pdev->dev, "failed to find rtc clock\n");
return PTR_ERR(info->rtc_clk);
}
clk_prepare_enable(info->rtc_clk);
+ info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
+ if (IS_ERR(info->rtc_src_clk)) {
+ dev_err(&pdev->dev, "failed to find rtc source clock\n");
+ return PTR_ERR(info->rtc_src_clk);
+ }
+ clk_prepare_enable(info->rtc_src_clk);
+
+
/* check to see if everything is setup correctly */
if (info->data->enable)
info->data->enable(info);
@@ -538,6 +596,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_setfreq(info, 1);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -557,6 +617,8 @@ static int s3c_rtc_suspend(struct device *dev)
struct s3c_rtc *info = dev_get_drvdata(dev);
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
/* save TICNT for anyone using periodic interrupts */
if (info->data->save_tick_cnt)
@@ -572,6 +634,8 @@ static int s3c_rtc_suspend(struct device *dev)
dev_err(dev, "enable_irq_wake failed\n");
}
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -582,6 +646,8 @@ static int s3c_rtc_resume(struct device *dev)
struct s3c_rtc *info = dev_get_drvdata(dev);
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
if (info->data->enable)
info->data->enable(info);
@@ -594,6 +660,8 @@ static int s3c_rtc_resume(struct device *dev)
info->wake_en = false;
}
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
return 0;
@@ -604,7 +672,11 @@ static SIMPLE_DEV_PM_OPS(s3c_rtc_pm_ops, s3c_rtc_suspend, s3c_rtc_resume);
static void s3c24xx_rtc_irq(struct s3c_rtc *info, int mask)
{
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
rtc_update_irq(info->rtc, 1, RTC_AF | RTC_IRQF);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
s3c_rtc_alarm_clk_enable(info, false);
@@ -613,8 +685,12 @@ static void s3c24xx_rtc_irq(struct s3c_rtc *info, int mask)
static void s3c6410_rtc_irq(struct s3c_rtc *info, int mask)
{
clk_enable(info->rtc_clk);
+ if (info->data->needs_src_clk)
+ clk_enable(info->rtc_src_clk);
rtc_update_irq(info->rtc, 1, RTC_AF | RTC_IRQF);
writeb(mask, info->base + S3C2410_INTP);
+ if (info->data->needs_src_clk)
+ clk_disable(info->rtc_src_clk);
clk_disable(info->rtc_clk);
s3c_rtc_alarm_clk_enable(info, false);
@@ -780,6 +856,18 @@ static struct s3c_rtc_data const s3c6410_rtc_data = {
.disable = s3c6410_rtc_disable,
};
+static struct s3c_rtc_data const exynos3250_rtc_data = {
+ .max_user_freq = 32768,
+ .needs_src_clk = true,
+ .irq_handler = s3c6410_rtc_irq,
+ .set_freq = s3c6410_rtc_setfreq,
+ .enable_tick = s3c6410_rtc_enable_tick,
+ .save_tick_cnt = s3c6410_rtc_save_tick_cnt,
+ .restore_tick_cnt = s3c6410_rtc_restore_tick_cnt,
+ .enable = s3c24xx_rtc_enable,
+ .disable = s3c6410_rtc_disable,
+};
+
static const struct of_device_id s3c_rtc_dt_match[] = {
{
.compatible = "samsung,s3c2410-rtc",
@@ -793,6 +881,9 @@ static const struct of_device_id s3c_rtc_dt_match[] = {
}, {
.compatible = "samsung,s3c6410-rtc",
.data = (void *)&s3c6410_rtc_data,
+ }, {
+ .compatible = "samsung,exynos3250-rtc",
+ .data = (void *)&exynos3250_rtc_data,
},
{ /* sentinel */ },
};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists