| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53FE8863.1000004@hitachi.com>
Date: Thu, 28 Aug 2014 10:39:47 +0900
From: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@...achi.com>
To: Hannes Reinecke <hare@...e.de>
Cc: linux-scsi@...r.kernel.org,
"Martin K. Petersen" <martin.petersen@...cle.com>,
yrl.pp-manager.tt@...achi.com, linux-kernel@...r.kernel.org,
"James E.J. Bottomley" <JBottomley@...allels.com>,
Hidehiro Kawai <hidehiro.kawai.ez@...achi.com>,
Doug Gilbert <dgilbert@...erlog.com>,
Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>,
Christoph Hellwig <hch@....de>
Subject: Re: Re: [RFC PATCH 09/10] scsi/trace: Add additional sense code
and additional sense code qualifier to scsi_print_sense trace point
(2014/08/27 23:16), Hannes Reinecke wrote:
> On 08/08/2014 01:50 PM, Yoshihiro YUNOMAE wrote:
>> There are no mean that additional sense code and additional sense code
>> qualifier
>> are output as different messages of sense key, so those information
>> are added.
>>
>> Note:
>> scsi_show_extd_sense() is changed from export symbol to non-export
>> symbol.
>>
>> - Result examples
>>
>> <Before> (printk)
>> sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error
>>
>> <After> (ftrace, merged into scsi_print_sense traceevent)
>> scsi_print_sense: host_no=2 channel=0 id=0 lun=0 [sda] Sense Key
>> (Medium Error [current]) Add. Sense (Unrecovered read error)
>>
>> Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@...achi.com>
>> Cc: Hannes Reinecke <hare@...e.de>
>> Cc: Doug Gilbert <dgilbert@...erlog.com>
>> Cc: Martin K. Petersen <martin.petersen@...cle.com>
>> Cc: Christoph Hellwig <hch@....de>
>> Cc: "James E.J. Bottomley" <JBottomley@...allels.com>
>> Cc: Hidehiro Kawai <hidehiro.kawai.ez@...achi.com>
>> Cc: Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
>> ---
>> drivers/scsi/constants.c | 932
>> -------------------------------------------
>> drivers/scsi/scsi_trace.c | 920
>> ++++++++++++++++++++++++++++++++++++++++++
>> include/scsi/scsi_dbg.h | 2
>> include/trace/events/scsi.h | 10
>> 4 files changed, 928 insertions(+), 936 deletions(-)
>>
>> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
>> index 85b75c8..ce9ceb8 100644
>> --- a/drivers/scsi/constants.c
>> +++ b/drivers/scsi/constants.c
>> @@ -14,12 +14,6 @@
>>
>> #include <scsi/scsi.h>
>> #include <scsi/scsi_cmnd.h>
>> -#include <scsi/scsi_device.h>
>> -#include <scsi/scsi_host.h>
>> -#include <scsi/scsi_eh.h>
>> -#include <scsi/scsi_dbg.h>
>> -
>> -#include <trace/events/scsi.h>
>>
>> /* Commands with service actions that change the command name */
>> #define SERVICE_ACTION_IN_12 0xab
>> @@ -429,929 +423,3 @@ void scsi_print_command(struct scsi_cmnd *cmd)
>> print_opcode_name(cmd->device, devname, cmd->cmnd, cmd->cmd_len);
>> }
>> EXPORT_SYMBOL(scsi_print_command);
>> -
>> -#ifdef CONFIG_SCSI_CONSTANTS
>> -
>> -struct error_info {
>> - unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
>> - const char * text;
>> -};
>> -
>> -/*
>> - * The canonical list of T10 Additional Sense Codes is available at:
>> - * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
>> - */
>> -
>> -static const struct error_info additional[] =
>> -{
>> - {0x0000, "No additional sense information"},
>> - {0x0001, "Filemark detected"},
>> - {0x0002, "End-of-partition/medium detected"},
>> - {0x0003, "Setmark detected"},
>> - {0x0004, "Beginning-of-partition/medium detected"},
>> - {0x0005, "End-of-data detected"},
>> - {0x0006, "I/O process terminated"},
>> - {0x0007, "Programmable early warning detected"},
>> - {0x0011, "Audio play operation in progress"},
>> - {0x0012, "Audio play operation paused"},
>> - {0x0013, "Audio play operation successfully completed"},
>> - {0x0014, "Audio play operation stopped due to error"},
>> - {0x0015, "No current audio status to return"},
>> - {0x0016, "Operation in progress"},
>> - {0x0017, "Cleaning requested"},
>> - {0x0018, "Erase operation in progress"},
>> - {0x0019, "Locate operation in progress"},
>> - {0x001A, "Rewind operation in progress"},
>> - {0x001B, "Set capacity operation in progress"},
>> - {0x001C, "Verify operation in progress"},
>> - {0x001D, "ATA pass through information available"},
>> - {0x001E, "Conflicting SA creation request"},
>> - {0x001F, "Logical unit transitioning to another power condition"},
>> - {0x0020, "Extended copy information available"},
>> -
>> - {0x0100, "No index/sector signal"},
>> -
>> - {0x0200, "No seek complete"},
>> -
>> - {0x0300, "Peripheral device write fault"},
>> - {0x0301, "No write current"},
>> - {0x0302, "Excessive write errors"},
>> -
>> - {0x0400, "Logical unit not ready, cause not reportable"},
>> - {0x0401, "Logical unit is in process of becoming ready"},
>> - {0x0402, "Logical unit not ready, initializing command required"},
>> - {0x0403, "Logical unit not ready, manual intervention required"},
>> - {0x0404, "Logical unit not ready, format in progress"},
>> - {0x0405, "Logical unit not ready, rebuild in progress"},
>> - {0x0406, "Logical unit not ready, recalculation in progress"},
>> - {0x0407, "Logical unit not ready, operation in progress"},
>> - {0x0408, "Logical unit not ready, long write in progress"},
>> - {0x0409, "Logical unit not ready, self-test in progress"},
>> - {0x040A, "Logical unit not accessible, asymmetric access state "
>> - "transition"},
>> - {0x040B, "Logical unit not accessible, target port in standby
>> state"},
>> - {0x040C, "Logical unit not accessible, target port in unavailable "
>> - "state"},
>> - {0x040D, "Logical unit not ready, structure check required"},
>> - {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
>> - {0x0411, "Logical unit not ready, notify (enable spinup) required"},
>> - {0x0412, "Logical unit not ready, offline"},
>> - {0x0413, "Logical unit not ready, SA creation in progress"},
>> - {0x0414, "Logical unit not ready, space allocation in progress"},
>> - {0x0415, "Logical unit not ready, robotics disabled"},
>> - {0x0416, "Logical unit not ready, configuration required"},
>> - {0x0417, "Logical unit not ready, calibration required"},
>> - {0x0418, "Logical unit not ready, a door is open"},
>> - {0x0419, "Logical unit not ready, operating in sequential mode"},
>> - {0x041A, "Logical unit not ready, start stop unit command in "
>> - "progress"},
>> - {0x041B, "Logical unit not ready, sanitize in progress"},
>> - {0x041C, "Logical unit not ready, additional power use not yet "
>> - "granted"},
>> - {0x041D, "Logical unit not ready, configuration in progress"},
>> -
>> - {0x0500, "Logical unit does not respond to selection"},
>> -
>> - {0x0600, "No reference position found"},
>> -
>> - {0x0700, "Multiple peripheral devices selected"},
>> -
>> - {0x0800, "Logical unit communication failure"},
>> - {0x0801, "Logical unit communication time-out"},
>> - {0x0802, "Logical unit communication parity error"},
>> - {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
>> - {0x0804, "Unreachable copy target"},
>> -
>> - {0x0900, "Track following error"},
>> - {0x0901, "Tracking servo failure"},
>> - {0x0902, "Focus servo failure"},
>> - {0x0903, "Spindle servo failure"},
>> - {0x0904, "Head select fault"},
>> -
>> - {0x0A00, "Error log overflow"},
>> -
>> - {0x0B00, "Warning"},
>> - {0x0B01, "Warning - specified temperature exceeded"},
>> - {0x0B02, "Warning - enclosure degraded"},
>> - {0x0B03, "Warning - background self-test failed"},
>> - {0x0B04, "Warning - background pre-scan detected medium error"},
>> - {0x0B05, "Warning - background medium scan detected medium error"},
>> - {0x0B06, "Warning - non-volatile cache now volatile"},
>> - {0x0B07, "Warning - degraded power to non-volatile cache"},
>> - {0x0B08, "Warning - power loss expected"},
>> - {0x0B09, "Warning - device statistics notification active"},
>> -
>> - {0x0C00, "Write error"},
>> - {0x0C01, "Write error - recovered with auto reallocation"},
>> - {0x0C02, "Write error - auto reallocation failed"},
>> - {0x0C03, "Write error - recommend reassignment"},
>> - {0x0C04, "Compression check miscompare error"},
>> - {0x0C05, "Data expansion occurred during compression"},
>> - {0x0C06, "Block not compressible"},
>> - {0x0C07, "Write error - recovery needed"},
>> - {0x0C08, "Write error - recovery failed"},
>> - {0x0C09, "Write error - loss of streaming"},
>> - {0x0C0A, "Write error - padding blocks added"},
>> - {0x0C0B, "Auxiliary memory write error"},
>> - {0x0C0C, "Write error - unexpected unsolicited data"},
>> - {0x0C0D, "Write error - not enough unsolicited data"},
>> - {0x0C0E, "Multiple write errors"},
>> - {0x0C0F, "Defects in error window"},
>> -
>> - {0x0D00, "Error detected by third party temporary initiator"},
>> - {0x0D01, "Third party device failure"},
>> - {0x0D02, "Copy target device not reachable"},
>> - {0x0D03, "Incorrect copy target device type"},
>> - {0x0D04, "Copy target device data underrun"},
>> - {0x0D05, "Copy target device data overrun"},
>> -
>> - {0x0E00, "Invalid information unit"},
>> - {0x0E01, "Information unit too short"},
>> - {0x0E02, "Information unit too long"},
>> - {0x0E03, "Invalid field in command information unit"},
>> -
>> - {0x1000, "Id CRC or ECC error"},
>> - {0x1001, "Logical block guard check failed"},
>> - {0x1002, "Logical block application tag check failed"},
>> - {0x1003, "Logical block reference tag check failed"},
>> - {0x1004, "Logical block protection error on recover buffered data"},
>> - {0x1005, "Logical block protection method error"},
>> -
>> - {0x1100, "Unrecovered read error"},
>> - {0x1101, "Read retries exhausted"},
>> - {0x1102, "Error too long to correct"},
>> - {0x1103, "Multiple read errors"},
>> - {0x1104, "Unrecovered read error - auto reallocate failed"},
>> - {0x1105, "L-EC uncorrectable error"},
>> - {0x1106, "CIRC unrecovered error"},
>> - {0x1107, "Data re-synchronization error"},
>> - {0x1108, "Incomplete block read"},
>> - {0x1109, "No gap found"},
>> - {0x110A, "Miscorrected error"},
>> - {0x110B, "Unrecovered read error - recommend reassignment"},
>> - {0x110C, "Unrecovered read error - recommend rewrite the data"},
>> - {0x110D, "De-compression CRC error"},
>> - {0x110E, "Cannot decompress using declared algorithm"},
>> - {0x110F, "Error reading UPC/EAN number"},
>> - {0x1110, "Error reading ISRC number"},
>> - {0x1111, "Read error - loss of streaming"},
>> - {0x1112, "Auxiliary memory read error"},
>> - {0x1113, "Read error - failed retransmission request"},
>> - {0x1114, "Read error - lba marked bad by application client"},
>> - {0x1115, "Write after sanitize required"},
>> -
>> - {0x1200, "Address mark not found for id field"},
>> -
>> - {0x1300, "Address mark not found for data field"},
>> -
>> - {0x1400, "Recorded entity not found"},
>> - {0x1401, "Record not found"},
>> - {0x1402, "Filemark or setmark not found"},
>> - {0x1403, "End-of-data not found"},
>> - {0x1404, "Block sequence error"},
>> - {0x1405, "Record not found - recommend reassignment"},
>> - {0x1406, "Record not found - data auto-reallocated"},
>> - {0x1407, "Locate operation failure"},
>> -
>> - {0x1500, "Random positioning error"},
>> - {0x1501, "Mechanical positioning error"},
>> - {0x1502, "Positioning error detected by read of medium"},
>> -
>> - {0x1600, "Data synchronization mark error"},
>> - {0x1601, "Data sync error - data rewritten"},
>> - {0x1602, "Data sync error - recommend rewrite"},
>> - {0x1603, "Data sync error - data auto-reallocated"},
>> - {0x1604, "Data sync error - recommend reassignment"},
>> -
>> - {0x1700, "Recovered data with no error correction applied"},
>> - {0x1701, "Recovered data with retries"},
>> - {0x1702, "Recovered data with positive head offset"},
>> - {0x1703, "Recovered data with negative head offset"},
>> - {0x1704, "Recovered data with retries and/or circ applied"},
>> - {0x1705, "Recovered data using previous sector id"},
>> - {0x1706, "Recovered data without ECC - data auto-reallocated"},
>> - {0x1707, "Recovered data without ECC - recommend reassignment"},
>> - {0x1708, "Recovered data without ECC - recommend rewrite"},
>> - {0x1709, "Recovered data without ECC - data rewritten"},
>> -
>> - {0x1800, "Recovered data with error correction applied"},
>> - {0x1801, "Recovered data with error corr. & retries applied"},
>> - {0x1802, "Recovered data - data auto-reallocated"},
>> - {0x1803, "Recovered data with CIRC"},
>> - {0x1804, "Recovered data with L-EC"},
>> - {0x1805, "Recovered data - recommend reassignment"},
>> - {0x1806, "Recovered data - recommend rewrite"},
>> - {0x1807, "Recovered data with ECC - data rewritten"},
>> - {0x1808, "Recovered data with linking"},
>> -
>> - {0x1900, "Defect list error"},
>> - {0x1901, "Defect list not available"},
>> - {0x1902, "Defect list error in primary list"},
>> - {0x1903, "Defect list error in grown list"},
>> -
>> - {0x1A00, "Parameter list length error"},
>> -
>> - {0x1B00, "Synchronous data transfer error"},
>> -
>> - {0x1C00, "Defect list not found"},
>> - {0x1C01, "Primary defect list not found"},
>> - {0x1C02, "Grown defect list not found"},
>> -
>> - {0x1D00, "Miscompare during verify operation"},
>> - {0x1D01, "Miscompare verify of unmapped LBA"},
>> -
>> - {0x1E00, "Recovered id with ECC correction"},
>> -
>> - {0x1F00, "Partial defect list transfer"},
>> -
>> - {0x2000, "Invalid command operation code"},
>> - {0x2001, "Access denied - initiator pending-enrolled"},
>> - {0x2002, "Access denied - no access rights"},
>> - {0x2003, "Access denied - invalid mgmt id key"},
>> - {0x2004, "Illegal command while in write capable state"},
>> - {0x2005, "Obsolete"},
>> - {0x2006, "Illegal command while in explicit address mode"},
>> - {0x2007, "Illegal command while in implicit address mode"},
>> - {0x2008, "Access denied - enrollment conflict"},
>> - {0x2009, "Access denied - invalid LU identifier"},
>> - {0x200A, "Access denied - invalid proxy token"},
>> - {0x200B, "Access denied - ACL LUN conflict"},
>> - {0x200C, "Illegal command when not in append-only mode"},
>> -
>> - {0x2100, "Logical block address out of range"},
>> - {0x2101, "Invalid element address"},
>> - {0x2102, "Invalid address for write"},
>> - {0x2103, "Invalid write crossing layer jump"},
>> -
>> - {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
>> -
>> - {0x2300, "Invalid token operation, cause not reportable"},
>> - {0x2301, "Invalid token operation, unsupported token type"},
>> - {0x2302, "Invalid token operation, remote token usage not
>> supported"},
>> - {0x2303, "Invalid token operation, remote rod token creation not "
>> - "supported"},
>> - {0x2304, "Invalid token operation, token unknown"},
>> - {0x2305, "Invalid token operation, token corrupt"},
>> - {0x2306, "Invalid token operation, token revoked"},
>> - {0x2307, "Invalid token operation, token expired"},
>> - {0x2308, "Invalid token operation, token cancelled"},
>> - {0x2309, "Invalid token operation, token deleted"},
>> - {0x230A, "Invalid token operation, invalid token length"},
>> -
>> - {0x2400, "Invalid field in cdb"},
>> - {0x2401, "CDB decryption error"},
>> - {0x2402, "Obsolete"},
>> - {0x2403, "Obsolete"},
>> - {0x2404, "Security audit value frozen"},
>> - {0x2405, "Security working key frozen"},
>> - {0x2406, "Nonce not unique"},
>> - {0x2407, "Nonce timestamp out of range"},
>> - {0x2408, "Invalid XCDB"},
>> -
>> - {0x2500, "Logical unit not supported"},
>> -
>> - {0x2600, "Invalid field in parameter list"},
>> - {0x2601, "Parameter not supported"},
>> - {0x2602, "Parameter value invalid"},
>> - {0x2603, "Threshold parameters not supported"},
>> - {0x2604, "Invalid release of persistent reservation"},
>> - {0x2605, "Data decryption error"},
>> - {0x2606, "Too many target descriptors"},
>> - {0x2607, "Unsupported target descriptor type code"},
>> - {0x2608, "Too many segment descriptors"},
>> - {0x2609, "Unsupported segment descriptor type code"},
>> - {0x260A, "Unexpected inexact segment"},
>> - {0x260B, "Inline data length exceeded"},
>> - {0x260C, "Invalid operation for copy source or destination"},
>> - {0x260D, "Copy segment granularity violation"},
>> - {0x260E, "Invalid parameter while port is enabled"},
>> - {0x260F, "Invalid data-out buffer integrity check value"},
>> - {0x2610, "Data decryption key fail limit reached"},
>> - {0x2611, "Incomplete key-associated data set"},
>> - {0x2612, "Vendor specific key reference not found"},
>> -
>> - {0x2700, "Write protected"},
>> - {0x2701, "Hardware write protected"},
>> - {0x2702, "Logical unit software write protected"},
>> - {0x2703, "Associated write protect"},
>> - {0x2704, "Persistent write protect"},
>> - {0x2705, "Permanent write protect"},
>> - {0x2706, "Conditional write protect"},
>> - {0x2707, "Space allocation failed write protect"},
>> -
>> - {0x2800, "Not ready to ready change, medium may have changed"},
>> - {0x2801, "Import or export element accessed"},
>> - {0x2802, "Format-layer may have changed"},
>> - {0x2803, "Import/export element accessed, medium changed"},
>> -
>> - {0x2900, "Power on, reset, or bus device reset occurred"},
>> - {0x2901, "Power on occurred"},
>> - {0x2902, "Scsi bus reset occurred"},
>> - {0x2903, "Bus device reset function occurred"},
>> - {0x2904, "Device internal reset"},
>> - {0x2905, "Transceiver mode changed to single-ended"},
>> - {0x2906, "Transceiver mode changed to lvd"},
>> - {0x2907, "I_T nexus loss occurred"},
>> -
>> - {0x2A00, "Parameters changed"},
>> - {0x2A01, "Mode parameters changed"},
>> - {0x2A02, "Log parameters changed"},
>> - {0x2A03, "Reservations preempted"},
>> - {0x2A04, "Reservations released"},
>> - {0x2A05, "Registrations preempted"},
>> - {0x2A06, "Asymmetric access state changed"},
>> - {0x2A07, "Implicit asymmetric access state transition failed"},
>> - {0x2A08, "Priority changed"},
>> - {0x2A09, "Capacity data has changed"},
>> - {0x2A0A, "Error history I_T nexus cleared"},
>> - {0x2A0B, "Error history snapshot released"},
>> - {0x2A0C, "Error recovery attributes have changed"},
>> - {0x2A0D, "Data encryption capabilities changed"},
>> - {0x2A10, "Timestamp changed"},
>> - {0x2A11, "Data encryption parameters changed by another i_t nexus"},
>> - {0x2A12, "Data encryption parameters changed by vendor specific "
>> - "event"},
>> - {0x2A13, "Data encryption key instance counter has changed"},
>> - {0x2A14, "SA creation capabilities data has changed"},
>> - {0x2A15, "Medium removal prevention preempted"},
>> -
>> - {0x2B00, "Copy cannot execute since host cannot disconnect"},
>> -
>> - {0x2C00, "Command sequence error"},
>> - {0x2C01, "Too many windows specified"},
>> - {0x2C02, "Invalid combination of windows specified"},
>> - {0x2C03, "Current program area is not empty"},
>> - {0x2C04, "Current program area is empty"},
>> - {0x2C05, "Illegal power condition request"},
>> - {0x2C06, "Persistent prevent conflict"},
>> - {0x2C07, "Previous busy status"},
>> - {0x2C08, "Previous task set full status"},
>> - {0x2C09, "Previous reservation conflict status"},
>> - {0x2C0A, "Partition or collection contains user objects"},
>> - {0x2C0B, "Not reserved"},
>> - {0x2C0C, "Orwrite generation does not match"},
>> -
>> - {0x2D00, "Overwrite error on update in place"},
>> -
>> - {0x2E00, "Insufficient time for operation"},
>> -
>> - {0x2F00, "Commands cleared by another initiator"},
>> - {0x2F01, "Commands cleared by power loss notification"},
>> - {0x2F02, "Commands cleared by device server"},
>> - {0x2F03, "Some commands cleared by queuing layer event"},
>> -
>> - {0x3000, "Incompatible medium installed"},
>> - {0x3001, "Cannot read medium - unknown format"},
>> - {0x3002, "Cannot read medium - incompatible format"},
>> - {0x3003, "Cleaning cartridge installed"},
>> - {0x3004, "Cannot write medium - unknown format"},
>> - {0x3005, "Cannot write medium - incompatible format"},
>> - {0x3006, "Cannot format medium - incompatible medium"},
>> - {0x3007, "Cleaning failure"},
>> - {0x3008, "Cannot write - application code mismatch"},
>> - {0x3009, "Current session not fixated for append"},
>> - {0x300A, "Cleaning request rejected"},
>> - {0x300C, "WORM medium - overwrite attempted"},
>> - {0x300D, "WORM medium - integrity check"},
>> - {0x3010, "Medium not formatted"},
>> - {0x3011, "Incompatible volume type"},
>> - {0x3012, "Incompatible volume qualifier"},
>> - {0x3013, "Cleaning volume expired"},
>> -
>> - {0x3100, "Medium format corrupted"},
>> - {0x3101, "Format command failed"},
>> - {0x3102, "Zoned formatting failed due to spare linking"},
>> - {0x3103, "Sanitize command failed"},
>> -
>> - {0x3200, "No defect spare location available"},
>> - {0x3201, "Defect list update failure"},
>> -
>> - {0x3300, "Tape length error"},
>> -
>> - {0x3400, "Enclosure failure"},
>> -
>> - {0x3500, "Enclosure services failure"},
>> - {0x3501, "Unsupported enclosure function"},
>> - {0x3502, "Enclosure services unavailable"},
>> - {0x3503, "Enclosure services transfer failure"},
>> - {0x3504, "Enclosure services transfer refused"},
>> - {0x3505, "Enclosure services checksum error"},
>> -
>> - {0x3600, "Ribbon, ink, or toner failure"},
>> -
>> - {0x3700, "Rounded parameter"},
>> -
>> - {0x3800, "Event status notification"},
>> - {0x3802, "Esn - power management class event"},
>> - {0x3804, "Esn - media class event"},
>> - {0x3806, "Esn - device busy class event"},
>> - {0x3807, "Thin Provisioning soft threshold reached"},
>> -
>> - {0x3900, "Saving parameters not supported"},
>> -
>> - {0x3A00, "Medium not present"},
>> - {0x3A01, "Medium not present - tray closed"},
>> - {0x3A02, "Medium not present - tray open"},
>> - {0x3A03, "Medium not present - loadable"},
>> - {0x3A04, "Medium not present - medium auxiliary memory accessible"},
>> -
>> - {0x3B00, "Sequential positioning error"},
>> - {0x3B01, "Tape position error at beginning-of-medium"},
>> - {0x3B02, "Tape position error at end-of-medium"},
>> - {0x3B03, "Tape or electronic vertical forms unit not ready"},
>> - {0x3B04, "Slew failure"},
>> - {0x3B05, "Paper jam"},
>> - {0x3B06, "Failed to sense top-of-form"},
>> - {0x3B07, "Failed to sense bottom-of-form"},
>> - {0x3B08, "Reposition error"},
>> - {0x3B09, "Read past end of medium"},
>> - {0x3B0A, "Read past beginning of medium"},
>> - {0x3B0B, "Position past end of medium"},
>> - {0x3B0C, "Position past beginning of medium"},
>> - {0x3B0D, "Medium destination element full"},
>> - {0x3B0E, "Medium source element empty"},
>> - {0x3B0F, "End of medium reached"},
>> - {0x3B11, "Medium magazine not accessible"},
>> - {0x3B12, "Medium magazine removed"},
>> - {0x3B13, "Medium magazine inserted"},
>> - {0x3B14, "Medium magazine locked"},
>> - {0x3B15, "Medium magazine unlocked"},
>> - {0x3B16, "Mechanical positioning or changer error"},
>> - {0x3B17, "Read past end of user object"},
>> - {0x3B18, "Element disabled"},
>> - {0x3B19, "Element enabled"},
>> - {0x3B1A, "Data transfer device removed"},
>> - {0x3B1B, "Data transfer device inserted"},
>> - {0x3B1C, "Too many logical objects on partition to support "
>> - "operation"},
>> -
>> - {0x3D00, "Invalid bits in identify message"},
>> -
>> - {0x3E00, "Logical unit has not self-configured yet"},
>> - {0x3E01, "Logical unit failure"},
>> - {0x3E02, "Timeout on logical unit"},
>> - {0x3E03, "Logical unit failed self-test"},
>> - {0x3E04, "Logical unit unable to update self-test log"},
>> -
>> - {0x3F00, "Target operating conditions have changed"},
>> - {0x3F01, "Microcode has been changed"},
>> - {0x3F02, "Changed operating definition"},
>> - {0x3F03, "Inquiry data has changed"},
>> - {0x3F04, "Component device attached"},
>> - {0x3F05, "Device identifier changed"},
>> - {0x3F06, "Redundancy group created or modified"},
>> - {0x3F07, "Redundancy group deleted"},
>> - {0x3F08, "Spare created or modified"},
>> - {0x3F09, "Spare deleted"},
>> - {0x3F0A, "Volume set created or modified"},
>> - {0x3F0B, "Volume set deleted"},
>> - {0x3F0C, "Volume set deassigned"},
>> - {0x3F0D, "Volume set reassigned"},
>> - {0x3F0E, "Reported luns data has changed"},
>> - {0x3F0F, "Echo buffer overwritten"},
>> - {0x3F10, "Medium loadable"},
>> - {0x3F11, "Medium auxiliary memory accessible"},
>> - {0x3F12, "iSCSI IP address added"},
>> - {0x3F13, "iSCSI IP address removed"},
>> - {0x3F14, "iSCSI IP address changed"},
>> - {0x3F15, "Inspect referrals sense descriptors"},
>> -/*
>> - * {0x40NN, "Ram failure"},
>> - * {0x40NN, "Diagnostic failure on component nn"},
>> - * {0x41NN, "Data path failure"},
>> - * {0x42NN, "Power-on or self-test failure"},
>> - */
>> - {0x4300, "Message error"},
>> -
>> - {0x4400, "Internal target failure"},
>> - {0x4401, "Persistent reservation information lost"},
>> - {0x4471, "ATA device failed set features"},
>> -
>> - {0x4500, "Select or reselect failure"},
>> -
>> - {0x4600, "Unsuccessful soft reset"},
>> -
>> - {0x4700, "Scsi parity error"},
>> - {0x4701, "Data phase CRC error detected"},
>> - {0x4702, "Scsi parity error detected during st data phase"},
>> - {0x4703, "Information unit iuCRC error detected"},
>> - {0x4704, "Asynchronous information protection error detected"},
>> - {0x4705, "Protocol service CRC error"},
>> - {0x4706, "Phy test function in progress"},
>> - {0x477f, "Some commands cleared by iSCSI Protocol event"},
>> -
>> - {0x4800, "Initiator detected error message received"},
>> -
>> - {0x4900, "Invalid message error"},
>> -
>> - {0x4A00, "Command phase error"},
>> -
>> - {0x4B00, "Data phase error"},
>> - {0x4B01, "Invalid target port transfer tag received"},
>> - {0x4B02, "Too much write data"},
>> - {0x4B03, "Ack/nak timeout"},
>> - {0x4B04, "Nak received"},
>> - {0x4B05, "Data offset error"},
>> - {0x4B06, "Initiator response timeout"},
>> - {0x4B07, "Connection lost"},
>> - {0x4B08, "Data-in buffer overflow - data buffer size"},
>> - {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
>> - {0x4B0A, "Data-in buffer error"},
>> - {0x4B0B, "Data-out buffer overflow - data buffer size"},
>> - {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
>> - {0x4B0D, "Data-out buffer error"},
>> - {0x4B0E, "PCIe fabric error"},
>> - {0x4B0F, "PCIe completion timeout"},
>> - {0x4B10, "PCIe completer abort"},
>> - {0x4B11, "PCIe poisoned tlp received"},
>> - {0x4B12, "PCIe eCRC check failed"},
>> - {0x4B13, "PCIe unsupported request"},
>> - {0x4B14, "PCIe acs violation"},
>> - {0x4B15, "PCIe tlp prefix blocked"},
>> -
>> - {0x4C00, "Logical unit failed self-configuration"},
>> -/*
>> - * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
>> - */
>> - {0x4E00, "Overlapped commands attempted"},
>> -
>> - {0x5000, "Write append error"},
>> - {0x5001, "Write append position error"},
>> - {0x5002, "Position error related to timing"},
>> -
>> - {0x5100, "Erase failure"},
>> - {0x5101, "Erase failure - incomplete erase operation detected"},
>> -
>> - {0x5200, "Cartridge fault"},
>> -
>> - {0x5300, "Media load or eject failed"},
>> - {0x5301, "Unload tape failure"},
>> - {0x5302, "Medium removal prevented"},
>> - {0x5303, "Medium removal prevented by data transfer element"},
>> - {0x5304, "Medium thread or unthread failure"},
>> - {0x5305, "Volume identifier invalid"},
>> - {0x5306, "Volume identifier missing"},
>> - {0x5307, "Duplicate volume identifier"},
>> - {0x5308, "Element status unknown"},
>> -
>> - {0x5400, "Scsi to host system interface failure"},
>> -
>> - {0x5500, "System resource failure"},
>> - {0x5501, "System buffer full"},
>> - {0x5502, "Insufficient reservation resources"},
>> - {0x5503, "Insufficient resources"},
>> - {0x5504, "Insufficient registration resources"},
>> - {0x5505, "Insufficient access control resources"},
>> - {0x5506, "Auxiliary memory out of space"},
>> - {0x5507, "Quota error"},
>> - {0x5508, "Maximum number of supplemental decryption keys exceeded"},
>> - {0x5509, "Medium auxiliary memory not accessible"},
>> - {0x550A, "Data currently unavailable"},
>> - {0x550B, "Insufficient power for operation"},
>> - {0x550C, "Insufficient resources to create rod"},
>> - {0x550D, "Insufficient resources to create rod token"},
>> -
>> - {0x5700, "Unable to recover table-of-contents"},
>> -
>> - {0x5800, "Generation does not exist"},
>> -
>> - {0x5900, "Updated block read"},
>> -
>> - {0x5A00, "Operator request or state change input"},
>> - {0x5A01, "Operator medium removal request"},
>> - {0x5A02, "Operator selected write protect"},
>> - {0x5A03, "Operator selected write permit"},
>> -
>> - {0x5B00, "Log exception"},
>> - {0x5B01, "Threshold condition met"},
>> - {0x5B02, "Log counter at maximum"},
>> - {0x5B03, "Log list codes exhausted"},
>> -
>> - {0x5C00, "Rpl status change"},
>> - {0x5C01, "Spindles synchronized"},
>> - {0x5C02, "Spindles not synchronized"},
>> -
>> - {0x5D00, "Failure prediction threshold exceeded"},
>> - {0x5D01, "Media failure prediction threshold exceeded"},
>> - {0x5D02, "Logical unit failure prediction threshold exceeded"},
>> - {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
>> - {0x5D10, "Hardware impending failure general hard drive failure"},
>> - {0x5D11, "Hardware impending failure drive error rate too high"},
>> - {0x5D12, "Hardware impending failure data error rate too high"},
>> - {0x5D13, "Hardware impending failure seek error rate too high"},
>> - {0x5D14, "Hardware impending failure too many block reassigns"},
>> - {0x5D15, "Hardware impending failure access times too high"},
>> - {0x5D16, "Hardware impending failure start unit times too high"},
>> - {0x5D17, "Hardware impending failure channel parametrics"},
>> - {0x5D18, "Hardware impending failure controller detected"},
>> - {0x5D19, "Hardware impending failure throughput performance"},
>> - {0x5D1A, "Hardware impending failure seek time performance"},
>> - {0x5D1B, "Hardware impending failure spin-up retry count"},
>> - {0x5D1C, "Hardware impending failure drive calibration retry
>> count"},
>> - {0x5D20, "Controller impending failure general hard drive failure"},
>> - {0x5D21, "Controller impending failure drive error rate too high"},
>> - {0x5D22, "Controller impending failure data error rate too high"},
>> - {0x5D23, "Controller impending failure seek error rate too high"},
>> - {0x5D24, "Controller impending failure too many block reassigns"},
>> - {0x5D25, "Controller impending failure access times too high"},
>> - {0x5D26, "Controller impending failure start unit times too high"},
>> - {0x5D27, "Controller impending failure channel parametrics"},
>> - {0x5D28, "Controller impending failure controller detected"},
>> - {0x5D29, "Controller impending failure throughput performance"},
>> - {0x5D2A, "Controller impending failure seek time performance"},
>> - {0x5D2B, "Controller impending failure spin-up retry count"},
>> - {0x5D2C, "Controller impending failure drive calibration retry
>> count"},
>> - {0x5D30, "Data channel impending failure general hard drive
>> failure"},
>> - {0x5D31, "Data channel impending failure drive error rate too
>> high"},
>> - {0x5D32, "Data channel impending failure data error rate too high"},
>> - {0x5D33, "Data channel impending failure seek error rate too high"},
>> - {0x5D34, "Data channel impending failure too many block reassigns"},
>> - {0x5D35, "Data channel impending failure access times too high"},
>> - {0x5D36, "Data channel impending failure start unit times too
>> high"},
>> - {0x5D37, "Data channel impending failure channel parametrics"},
>> - {0x5D38, "Data channel impending failure controller detected"},
>> - {0x5D39, "Data channel impending failure throughput performance"},
>> - {0x5D3A, "Data channel impending failure seek time performance"},
>> - {0x5D3B, "Data channel impending failure spin-up retry count"},
>> - {0x5D3C, "Data channel impending failure drive calibration retry "
>> - "count"},
>> - {0x5D40, "Servo impending failure general hard drive failure"},
>> - {0x5D41, "Servo impending failure drive error rate too high"},
>> - {0x5D42, "Servo impending failure data error rate too high"},
>> - {0x5D43, "Servo impending failure seek error rate too high"},
>> - {0x5D44, "Servo impending failure too many block reassigns"},
>> - {0x5D45, "Servo impending failure access times too high"},
>> - {0x5D46, "Servo impending failure start unit times too high"},
>> - {0x5D47, "Servo impending failure channel parametrics"},
>> - {0x5D48, "Servo impending failure controller detected"},
>> - {0x5D49, "Servo impending failure throughput performance"},
>> - {0x5D4A, "Servo impending failure seek time performance"},
>> - {0x5D4B, "Servo impending failure spin-up retry count"},
>> - {0x5D4C, "Servo impending failure drive calibration retry count"},
>> - {0x5D50, "Spindle impending failure general hard drive failure"},
>> - {0x5D51, "Spindle impending failure drive error rate too high"},
>> - {0x5D52, "Spindle impending failure data error rate too high"},
>> - {0x5D53, "Spindle impending failure seek error rate too high"},
>> - {0x5D54, "Spindle impending failure too many block reassigns"},
>> - {0x5D55, "Spindle impending failure access times too high"},
>> - {0x5D56, "Spindle impending failure start unit times too high"},
>> - {0x5D57, "Spindle impending failure channel parametrics"},
>> - {0x5D58, "Spindle impending failure controller detected"},
>> - {0x5D59, "Spindle impending failure throughput performance"},
>> - {0x5D5A, "Spindle impending failure seek time performance"},
>> - {0x5D5B, "Spindle impending failure spin-up retry count"},
>> - {0x5D5C, "Spindle impending failure drive calibration retry count"},
>> - {0x5D60, "Firmware impending failure general hard drive failure"},
>> - {0x5D61, "Firmware impending failure drive error rate too high"},
>> - {0x5D62, "Firmware impending failure data error rate too high"},
>> - {0x5D63, "Firmware impending failure seek error rate too high"},
>> - {0x5D64, "Firmware impending failure too many block reassigns"},
>> - {0x5D65, "Firmware impending failure access times too high"},
>> - {0x5D66, "Firmware impending failure start unit times too high"},
>> - {0x5D67, "Firmware impending failure channel parametrics"},
>> - {0x5D68, "Firmware impending failure controller detected"},
>> - {0x5D69, "Firmware impending failure throughput performance"},
>> - {0x5D6A, "Firmware impending failure seek time performance"},
>> - {0x5D6B, "Firmware impending failure spin-up retry count"},
>> - {0x5D6C, "Firmware impending failure drive calibration retry
>> count"},
>> - {0x5DFF, "Failure prediction threshold exceeded (false)"},
>> -
>> - {0x5E00, "Low power condition on"},
>> - {0x5E01, "Idle condition activated by timer"},
>> - {0x5E02, "Standby condition activated by timer"},
>> - {0x5E03, "Idle condition activated by command"},
>> - {0x5E04, "Standby condition activated by command"},
>> - {0x5E05, "Idle_b condition activated by timer"},
>> - {0x5E06, "Idle_b condition activated by command"},
>> - {0x5E07, "Idle_c condition activated by timer"},
>> - {0x5E08, "Idle_c condition activated by command"},
>> - {0x5E09, "Standby_y condition activated by timer"},
>> - {0x5E0A, "Standby_y condition activated by command"},
>> - {0x5E41, "Power state change to active"},
>> - {0x5E42, "Power state change to idle"},
>> - {0x5E43, "Power state change to standby"},
>> - {0x5E45, "Power state change to sleep"},
>> - {0x5E47, "Power state change to device control"},
>> -
>> - {0x6000, "Lamp failure"},
>> -
>> - {0x6100, "Video acquisition error"},
>> - {0x6101, "Unable to acquire video"},
>> - {0x6102, "Out of focus"},
>> -
>> - {0x6200, "Scan head positioning error"},
>> -
>> - {0x6300, "End of user area encountered on this track"},
>> - {0x6301, "Packet does not fit in available space"},
>> -
>> - {0x6400, "Illegal mode for this track"},
>> - {0x6401, "Invalid packet size"},
>> -
>> - {0x6500, "Voltage fault"},
>> -
>> - {0x6600, "Automatic document feeder cover up"},
>> - {0x6601, "Automatic document feeder lift up"},
>> - {0x6602, "Document jam in automatic document feeder"},
>> - {0x6603, "Document miss feed automatic in document feeder"},
>> -
>> - {0x6700, "Configuration failure"},
>> - {0x6701, "Configuration of incapable logical units failed"},
>> - {0x6702, "Add logical unit failed"},
>> - {0x6703, "Modification of logical unit failed"},
>> - {0x6704, "Exchange of logical unit failed"},
>> - {0x6705, "Remove of logical unit failed"},
>> - {0x6706, "Attachment of logical unit failed"},
>> - {0x6707, "Creation of logical unit failed"},
>> - {0x6708, "Assign failure occurred"},
>> - {0x6709, "Multiply assigned logical unit"},
>> - {0x670A, "Set target port groups command failed"},
>> - {0x670B, "ATA device feature not enabled"},
>> -
>> - {0x6800, "Logical unit not configured"},
>> - {0x6801, "Subsidiary logical unit not configured"},
>> -
>> - {0x6900, "Data loss on logical unit"},
>> - {0x6901, "Multiple logical unit failures"},
>> - {0x6902, "Parity/data mismatch"},
>> -
>> - {0x6A00, "Informational, refer to log"},
>> -
>> - {0x6B00, "State change has occurred"},
>> - {0x6B01, "Redundancy level got better"},
>> - {0x6B02, "Redundancy level got worse"},
>> -
>> - {0x6C00, "Rebuild failure occurred"},
>> -
>> - {0x6D00, "Recalculate failure occurred"},
>> -
>> - {0x6E00, "Command to logical unit failed"},
>> -
>> - {0x6F00, "Copy protection key exchange failure - authentication "
>> - "failure"},
>> - {0x6F01, "Copy protection key exchange failure - key not present"},
>> - {0x6F02, "Copy protection key exchange failure - key not
>> established"},
>> - {0x6F03, "Read of scrambled sector without authentication"},
>> - {0x6F04, "Media region code is mismatched to logical unit region"},
>> - {0x6F05, "Drive region must be permanent/region reset count error"},
>> - {0x6F06, "Insufficient block count for binding nonce recording"},
>> - {0x6F07, "Conflict in binding nonce recording"},
>> -/*
>> - * {0x70NN, "Decompression exception short algorithm id of nn"},
>> - */
>> - {0x7100, "Decompression exception long algorithm id"},
>> -
>> - {0x7200, "Session fixation error"},
>> - {0x7201, "Session fixation error writing lead-in"},
>> - {0x7202, "Session fixation error writing lead-out"},
>> - {0x7203, "Session fixation error - incomplete track in session"},
>> - {0x7204, "Empty or partially written reserved track"},
>> - {0x7205, "No more track reservations allowed"},
>> - {0x7206, "RMZ extension is not allowed"},
>> - {0x7207, "No more test zone extensions are allowed"},
>> -
>> - {0x7300, "Cd control error"},
>> - {0x7301, "Power calibration area almost full"},
>> - {0x7302, "Power calibration area is full"},
>> - {0x7303, "Power calibration area error"},
>> - {0x7304, "Program memory area update failure"},
>> - {0x7305, "Program memory area is full"},
>> - {0x7306, "RMA/PMA is almost full"},
>> - {0x7310, "Current power calibration area almost full"},
>> - {0x7311, "Current power calibration area is full"},
>> - {0x7317, "RDZ is full"},
>> -
>> - {0x7400, "Security error"},
>> - {0x7401, "Unable to decrypt data"},
>> - {0x7402, "Unencrypted data encountered while decrypting"},
>> - {0x7403, "Incorrect data encryption key"},
>> - {0x7404, "Cryptographic integrity validation failed"},
>> - {0x7405, "Error decrypting data"},
>> - {0x7406, "Unknown signature verification key"},
>> - {0x7407, "Encryption parameters not useable"},
>> - {0x7408, "Digital signature validation failure"},
>> - {0x7409, "Encryption mode mismatch on read"},
>> - {0x740A, "Encrypted block not raw read enabled"},
>> - {0x740B, "Incorrect Encryption parameters"},
>> - {0x740C, "Unable to decrypt parameter list"},
>> - {0x740D, "Encryption algorithm disabled"},
>> - {0x7410, "SA creation parameter value invalid"},
>> - {0x7411, "SA creation parameter value rejected"},
>> - {0x7412, "Invalid SA usage"},
>> - {0x7421, "Data Encryption configuration prevented"},
>> - {0x7430, "SA creation parameter not supported"},
>> - {0x7440, "Authentication failed"},
>> - {0x7461, "External data encryption key manager access error"},
>> - {0x7462, "External data encryption key manager error"},
>> - {0x7463, "External data encryption key not found"},
>> - {0x7464, "External data encryption request not authorized"},
>> - {0x746E, "External data encryption control timeout"},
>> - {0x746F, "External data encryption control error"},
>> - {0x7471, "Logical unit access not authorized"},
>> - {0x7479, "Security conflict in translated device"},
>> -
>> - {0, NULL}
>> -};
>> -
>> -struct error_info2 {
>> - unsigned char code1, code2_min, code2_max;
>> - const char * fmt;
>> -};
>> -
>> -static const struct error_info2 additional2[] =
>> -{
>> - {0x40, 0x00, 0x7f, "Ram failure (%x)"},
>> - {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
>> - {0x41, 0x00, 0xff, "Data path failure (%x)"},
>> - {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
>> - {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
>> - {0x70, 0x00, 0xff, "Decompression exception short algorithm id of
>> %x"},
>> - {0, 0, 0, NULL}
>> -};
>> -#endif
>> -
>> -/*
>> - * Get additional sense code string or NULL if not available.
>> - * This string may contain a "%x" and should be printed with ascq as
>> arg.
>> - */
>> -const char *
>> -scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
>> -#ifdef CONFIG_SCSI_CONSTANTS
>> - int i;
>> - unsigned short code = ((asc << 8) | ascq);
>> -
>> - for (i = 0; additional[i].text; i++)
>> - if (additional[i].code12 == code)
>> - return additional[i].text;
>> - for (i = 0; additional2[i].fmt; i++) {
>> - if (additional2[i].code1 == asc &&
>> - ascq >= additional2[i].code2_min &&
>> - ascq <= additional2[i].code2_max)
>> - return additional2[i].fmt;
>> - }
>> -#endif
>> - return NULL;
>> -}
>> -EXPORT_SYMBOL(scsi_extd_sense_format);
>> -
>> -void
>> -scsi_show_extd_sense(struct scsi_device *sdev, const char *name,
>> - unsigned char asc, unsigned char ascq)
>> -{
>> - const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
>> -
>> - if (extd_sense_fmt) {
>> - if (strstr(extd_sense_fmt, "%x")) {
>> - char sense_buf[50];
>> - sprintf(sense_buf, extd_sense_fmt, ascq);
>> - sdev_printk(KERN_INFO, sdev,
>> - "[%s] Add. Sense: %s", name, sense_buf);
>> - } else
>> - sdev_printk(KERN_INFO, sdev,
>> - "[%s] Add. Sense: %s\n",
>> - name, extd_sense_fmt);
>> - } else
>> - sdev_printk(KERN_INFO, sdev,
>> - "[%s] %sASC=0x%x %sASCQ=0x%x\n",
>> - name, asc >= 0x80 ? "<<vendor>> " : "", asc,
>> - asc < 0 && ascq >= 0x80 ? "<<vendor>> ": "",
>> - ascq);
>> -}
>> -EXPORT_SYMBOL(scsi_show_extd_sense);
>> -
>> -/*
>> - * Print normalized SCSI sense header with a prefix.
>> - */
>> -void
>> -scsi_print_sense_hdr(struct scsi_device *sdev, const char *name,
>> - struct scsi_sense_hdr *sshdr)
>> -{
>> - trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0);
>> - scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
>> -}
>> -EXPORT_SYMBOL(scsi_print_sense_hdr);
>> -
>> -/* Normalize and print sense buffer with name prefix */
>> -void __scsi_print_sense(struct scsi_device *sdev, const char *name,
>> - const unsigned char *sense_buffer, int sense_len)
>> -{
>> - struct scsi_sense_hdr sshdr;
>> - int raw;
>> -
>> - raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr);
>> -
>> - trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len,
>> - raw);
>> - scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
>> -}
>> -EXPORT_SYMBOL(__scsi_print_sense);
>> -
>> -/* Normalize and print sense buffer in SCSI command */
>> -void scsi_print_sense(struct scsi_cmnd *cmd)
>> -{
>> - const char *devname = cmd->request->rq_disk ?
>> - cmd->request->rq_disk->disk_name : "scsi";
>> -
>> - __scsi_print_sense(cmd->device, devname, cmd->sense_buffer,
>> - SCSI_SENSE_BUFFERSIZE);
>> -}
>> -EXPORT_SYMBOL(scsi_print_sense);
>> diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
>> index 2ecb1dc..60678d8 100644
>> --- a/drivers/scsi/scsi_trace.c
>> +++ b/drivers/scsi/scsi_trace.c
>> @@ -22,6 +22,7 @@
>>
>> #include <scsi/scsi_dbg.h>
>> #include <scsi/scsi_eh.h>
>> +#include <scsi/scsi_dbg.h>
>>
>> #define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
>> #define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9])
>> @@ -291,6 +292,841 @@ scsi_trace_parse_cdb(struct trace_seq *p,
>> unsigned char *cdb, int len)
>> }
>>
>> #ifdef CONFIG_SCSI_CONSTANTS
>> +
>> +struct error_info {
>> + unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
>> + const char *text;
>> +};
>> +
>> +/*
>> + * The canonical list of T10 Additional Sense Codes is available at:
>> + * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
>> + */
>> +
>> +static const struct error_info additional[] =
>> +{
>> + {0x0000, "No additional sense information"},
>> + {0x0001, "Filemark detected"},
>> + {0x0002, "End-of-partition/medium detected"},
>> + {0x0003, "Setmark detected"},
>> + {0x0004, "Beginning-of-partition/medium detected"},
>> + {0x0005, "End-of-data detected"},
>> + {0x0006, "I/O process terminated"},
>> + {0x0007, "Programmable early warning detected"},
>> + {0x0011, "Audio play operation in progress"},
>> + {0x0012, "Audio play operation paused"},
>> + {0x0013, "Audio play operation successfully completed"},
>> + {0x0014, "Audio play operation stopped due to error"},
>> + {0x0015, "No current audio status to return"},
>> + {0x0016, "Operation in progress"},
>> + {0x0017, "Cleaning requested"},
>> + {0x0018, "Erase operation in progress"},
>> + {0x0019, "Locate operation in progress"},
>> + {0x001A, "Rewind operation in progress"},
>> + {0x001B, "Set capacity operation in progress"},
>> + {0x001C, "Verify operation in progress"},
>> + {0x001D, "ATA pass through information available"},
>> + {0x001E, "Conflicting SA creation request"},
>> + {0x001F, "Logical unit transitioning to another power condition"},
>> + {0x0020, "Extended copy information available"},
>> +
>> + {0x0100, "No index/sector signal"},
>> +
>> + {0x0200, "No seek complete"},
>> +
>> + {0x0300, "Peripheral device write fault"},
>> + {0x0301, "No write current"},
>> + {0x0302, "Excessive write errors"},
>> +
>> + {0x0400, "Logical unit not ready, cause not reportable"},
>> + {0x0401, "Logical unit is in process of becoming ready"},
>> + {0x0402, "Logical unit not ready, initializing command required"},
>> + {0x0403, "Logical unit not ready, manual intervention required"},
>> + {0x0404, "Logical unit not ready, format in progress"},
>> + {0x0405, "Logical unit not ready, rebuild in progress"},
>> + {0x0406, "Logical unit not ready, recalculation in progress"},
>> + {0x0407, "Logical unit not ready, operation in progress"},
>> + {0x0408, "Logical unit not ready, long write in progress"},
>> + {0x0409, "Logical unit not ready, self-test in progress"},
>> + {0x040A, "Logical unit not accessible, asymmetric access state "
>> + "transition"},
>> + {0x040B, "Logical unit not accessible, target port in standby
>> state"},
>> + {0x040C, "Logical unit not accessible, target port in unavailable "
>> + "state"},
>> + {0x040D, "Logical unit not ready, structure check required"},
>> + {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
>> + {0x0411, "Logical unit not ready, notify (enable spinup) required"},
>> + {0x0412, "Logical unit not ready, offline"},
>> + {0x0413, "Logical unit not ready, SA creation in progress"},
>> + {0x0414, "Logical unit not ready, space allocation in progress"},
>> + {0x0415, "Logical unit not ready, robotics disabled"},
>> + {0x0416, "Logical unit not ready, configuration required"},
>> + {0x0417, "Logical unit not ready, calibration required"},
>> + {0x0418, "Logical unit not ready, a door is open"},
>> + {0x0419, "Logical unit not ready, operating in sequential mode"},
>> + {0x041A, "Logical unit not ready, start stop unit command in "
>> + "progress"},
>> + {0x041B, "Logical unit not ready, sanitize in progress"},
>> + {0x041C, "Logical unit not ready, additional power use not yet "
>> + "granted"},
>> + {0x041D, "Logical unit not ready, configuration in progress"},
>> +
>> + {0x0500, "Logical unit does not respond to selection"},
>> +
>> + {0x0600, "No reference position found"},
>> +
>> + {0x0700, "Multiple peripheral devices selected"},
>> +
>> + {0x0800, "Logical unit communication failure"},
>> + {0x0801, "Logical unit communication time-out"},
>> + {0x0802, "Logical unit communication parity error"},
>> + {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
>> + {0x0804, "Unreachable copy target"},
>> +
>> + {0x0900, "Track following error"},
>> + {0x0901, "Tracking servo failure"},
>> + {0x0902, "Focus servo failure"},
>> + {0x0903, "Spindle servo failure"},
>> + {0x0904, "Head select fault"},
>> +
>> + {0x0A00, "Error log overflow"},
>> +
>> + {0x0B00, "Warning"},
>> + {0x0B01, "Warning - specified temperature exceeded"},
>> + {0x0B02, "Warning - enclosure degraded"},
>> + {0x0B03, "Warning - background self-test failed"},
>> + {0x0B04, "Warning - background pre-scan detected medium error"},
>> + {0x0B05, "Warning - background medium scan detected medium error"},
>> + {0x0B06, "Warning - non-volatile cache now volatile"},
>> + {0x0B07, "Warning - degraded power to non-volatile cache"},
>> + {0x0B08, "Warning - power loss expected"},
>> + {0x0B09, "Warning - device statistics notification active"},
>> +
>> + {0x0C00, "Write error"},
>> + {0x0C01, "Write error - recovered with auto reallocation"},
>> + {0x0C02, "Write error - auto reallocation failed"},
>> + {0x0C03, "Write error - recommend reassignment"},
>> + {0x0C04, "Compression check miscompare error"},
>> + {0x0C05, "Data expansion occurred during compression"},
>> + {0x0C06, "Block not compressible"},
>> + {0x0C07, "Write error - recovery needed"},
>> + {0x0C08, "Write error - recovery failed"},
>> + {0x0C09, "Write error - loss of streaming"},
>> + {0x0C0A, "Write error - padding blocks added"},
>> + {0x0C0B, "Auxiliary memory write error"},
>> + {0x0C0C, "Write error - unexpected unsolicited data"},
>> + {0x0C0D, "Write error - not enough unsolicited data"},
>> + {0x0C0E, "Multiple write errors"},
>> + {0x0C0F, "Defects in error window"},
>> +
>> + {0x0D00, "Error detected by third party temporary initiator"},
>> + {0x0D01, "Third party device failure"},
>> + {0x0D02, "Copy target device not reachable"},
>> + {0x0D03, "Incorrect copy target device type"},
>> + {0x0D04, "Copy target device data underrun"},
>> + {0x0D05, "Copy target device data overrun"},
>> +
>> + {0x0E00, "Invalid information unit"},
>> + {0x0E01, "Information unit too short"},
>> + {0x0E02, "Information unit too long"},
>> + {0x0E03, "Invalid field in command information unit"},
>> +
>> + {0x1000, "Id CRC or ECC error"},
>> + {0x1001, "Logical block guard check failed"},
>> + {0x1002, "Logical block application tag check failed"},
>> + {0x1003, "Logical block reference tag check failed"},
>> + {0x1004, "Logical block protection error on recover buffered data"},
>> + {0x1005, "Logical block protection method error"},
>> +
>> + {0x1100, "Unrecovered read error"},
>> + {0x1101, "Read retries exhausted"},
>> + {0x1102, "Error too long to correct"},
>> + {0x1103, "Multiple read errors"},
>> + {0x1104, "Unrecovered read error - auto reallocate failed"},
>> + {0x1105, "L-EC uncorrectable error"},
>> + {0x1106, "CIRC unrecovered error"},
>> + {0x1107, "Data re-synchronization error"},
>> + {0x1108, "Incomplete block read"},
>> + {0x1109, "No gap found"},
>> + {0x110A, "Miscorrected error"},
>> + {0x110B, "Unrecovered read error - recommend reassignment"},
>> + {0x110C, "Unrecovered read error - recommend rewrite the data"},
>> + {0x110D, "De-compression CRC error"},
>> + {0x110E, "Cannot decompress using declared algorithm"},
>> + {0x110F, "Error reading UPC/EAN number"},
>> + {0x1110, "Error reading ISRC number"},
>> + {0x1111, "Read error - loss of streaming"},
>> + {0x1112, "Auxiliary memory read error"},
>> + {0x1113, "Read error - failed retransmission request"},
>> + {0x1114, "Read error - lba marked bad by application client"},
>> + {0x1115, "Write after sanitize required"},
>> +
>> + {0x1200, "Address mark not found for id field"},
>> +
>> + {0x1300, "Address mark not found for data field"},
>> +
>> + {0x1400, "Recorded entity not found"},
>> + {0x1401, "Record not found"},
>> + {0x1402, "Filemark or setmark not found"},
>> + {0x1403, "End-of-data not found"},
>> + {0x1404, "Block sequence error"},
>> + {0x1405, "Record not found - recommend reassignment"},
>> + {0x1406, "Record not found - data auto-reallocated"},
>> + {0x1407, "Locate operation failure"},
>> +
>> + {0x1500, "Random positioning error"},
>> + {0x1501, "Mechanical positioning error"},
>> + {0x1502, "Positioning error detected by read of medium"},
>> +
>> + {0x1600, "Data synchronization mark error"},
>> + {0x1601, "Data sync error - data rewritten"},
>> + {0x1602, "Data sync error - recommend rewrite"},
>> + {0x1603, "Data sync error - data auto-reallocated"},
>> + {0x1604, "Data sync error - recommend reassignment"},
>> +
>> + {0x1700, "Recovered data with no error correction applied"},
>> + {0x1701, "Recovered data with retries"},
>> + {0x1702, "Recovered data with positive head offset"},
>> + {0x1703, "Recovered data with negative head offset"},
>> + {0x1704, "Recovered data with retries and/or circ applied"},
>> + {0x1705, "Recovered data using previous sector id"},
>> + {0x1706, "Recovered data without ECC - data auto-reallocated"},
>> + {0x1707, "Recovered data without ECC - recommend reassignment"},
>> + {0x1708, "Recovered data without ECC - recommend rewrite"},
>> + {0x1709, "Recovered data without ECC - data rewritten"},
>> +
>> + {0x1800, "Recovered data with error correction applied"},
>> + {0x1801, "Recovered data with error corr. & retries applied"},
>> + {0x1802, "Recovered data - data auto-reallocated"},
>> + {0x1803, "Recovered data with CIRC"},
>> + {0x1804, "Recovered data with L-EC"},
>> + {0x1805, "Recovered data - recommend reassignment"},
>> + {0x1806, "Recovered data - recommend rewrite"},
>> + {0x1807, "Recovered data with ECC - data rewritten"},
>> + {0x1808, "Recovered data with linking"},
>> +
>> + {0x1900, "Defect list error"},
>> + {0x1901, "Defect list not available"},
>> + {0x1902, "Defect list error in primary list"},
>> + {0x1903, "Defect list error in grown list"},
>> +
>> + {0x1A00, "Parameter list length error"},
>> +
>> + {0x1B00, "Synchronous data transfer error"},
>> +
>> + {0x1C00, "Defect list not found"},
>> + {0x1C01, "Primary defect list not found"},
>> + {0x1C02, "Grown defect list not found"},
>> +
>> + {0x1D00, "Miscompare during verify operation"},
>> + {0x1D01, "Miscompare verify of unmapped LBA"},
>> +
>> + {0x1E00, "Recovered id with ECC correction"},
>> +
>> + {0x1F00, "Partial defect list transfer"},
>> +
>> + {0x2000, "Invalid command operation code"},
>> + {0x2001, "Access denied - initiator pending-enrolled"},
>> + {0x2002, "Access denied - no access rights"},
>> + {0x2003, "Access denied - invalid mgmt id key"},
>> + {0x2004, "Illegal command while in write capable state"},
>> + {0x2005, "Obsolete"},
>> + {0x2006, "Illegal command while in explicit address mode"},
>> + {0x2007, "Illegal command while in implicit address mode"},
>> + {0x2008, "Access denied - enrollment conflict"},
>> + {0x2009, "Access denied - invalid LU identifier"},
>> + {0x200A, "Access denied - invalid proxy token"},
>> + {0x200B, "Access denied - ACL LUN conflict"},
>> + {0x200C, "Illegal command when not in append-only mode"},
>> +
>> + {0x2100, "Logical block address out of range"},
>> + {0x2101, "Invalid element address"},
>> + {0x2102, "Invalid address for write"},
>> + {0x2103, "Invalid write crossing layer jump"},
>> +
>> + {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
>> +
>> + {0x2300, "Invalid token operation, cause not reportable"},
>> + {0x2301, "Invalid token operation, unsupported token type"},
>> + {0x2302, "Invalid token operation, remote token usage not
>> supported"},
>> + {0x2303, "Invalid token operation, remote rod token creation not "
>> + "supported"},
>> + {0x2304, "Invalid token operation, token unknown"},
>> + {0x2305, "Invalid token operation, token corrupt"},
>> + {0x2306, "Invalid token operation, token revoked"},
>> + {0x2307, "Invalid token operation, token expired"},
>> + {0x2308, "Invalid token operation, token cancelled"},
>> + {0x2309, "Invalid token operation, token deleted"},
>> + {0x230A, "Invalid token operation, invalid token length"},
>> +
>> + {0x2400, "Invalid field in cdb"},
>> + {0x2401, "CDB decryption error"},
>> + {0x2402, "Obsolete"},
>> + {0x2403, "Obsolete"},
>> + {0x2404, "Security audit value frozen"},
>> + {0x2405, "Security working key frozen"},
>> + {0x2406, "Nonce not unique"},
>> + {0x2407, "Nonce timestamp out of range"},
>> + {0x2408, "Invalid XCDB"},
>> +
>> + {0x2500, "Logical unit not supported"},
>> +
>> + {0x2600, "Invalid field in parameter list"},
>> + {0x2601, "Parameter not supported"},
>> + {0x2602, "Parameter value invalid"},
>> + {0x2603, "Threshold parameters not supported"},
>> + {0x2604, "Invalid release of persistent reservation"},
>> + {0x2605, "Data decryption error"},
>> + {0x2606, "Too many target descriptors"},
>> + {0x2607, "Unsupported target descriptor type code"},
>> + {0x2608, "Too many segment descriptors"},
>> + {0x2609, "Unsupported segment descriptor type code"},
>> + {0x260A, "Unexpected inexact segment"},
>> + {0x260B, "Inline data length exceeded"},
>> + {0x260C, "Invalid operation for copy source or destination"},
>> + {0x260D, "Copy segment granularity violation"},
>> + {0x260E, "Invalid parameter while port is enabled"},
>> + {0x260F, "Invalid data-out buffer integrity check value"},
>> + {0x2610, "Data decryption key fail limit reached"},
>> + {0x2611, "Incomplete key-associated data set"},
>> + {0x2612, "Vendor specific key reference not found"},
>> +
>> + {0x2700, "Write protected"},
>> + {0x2701, "Hardware write protected"},
>> + {0x2702, "Logical unit software write protected"},
>> + {0x2703, "Associated write protect"},
>> + {0x2704, "Persistent write protect"},
>> + {0x2705, "Permanent write protect"},
>> + {0x2706, "Conditional write protect"},
>> + {0x2707, "Space allocation failed write protect"},
>> +
>> + {0x2800, "Not ready to ready change, medium may have changed"},
>> + {0x2801, "Import or export element accessed"},
>> + {0x2802, "Format-layer may have changed"},
>> + {0x2803, "Import/export element accessed, medium changed"},
>> +
>> + {0x2900, "Power on, reset, or bus device reset occurred"},
>> + {0x2901, "Power on occurred"},
>> + {0x2902, "Scsi bus reset occurred"},
>> + {0x2903, "Bus device reset function occurred"},
>> + {0x2904, "Device internal reset"},
>> + {0x2905, "Transceiver mode changed to single-ended"},
>> + {0x2906, "Transceiver mode changed to lvd"},
>> + {0x2907, "I_T nexus loss occurred"},
>> +
>> + {0x2A00, "Parameters changed"},
>> + {0x2A01, "Mode parameters changed"},
>> + {0x2A02, "Log parameters changed"},
>> + {0x2A03, "Reservations preempted"},
>> + {0x2A04, "Reservations released"},
>> + {0x2A05, "Registrations preempted"},
>> + {0x2A06, "Asymmetric access state changed"},
>> + {0x2A07, "Implicit asymmetric access state transition failed"},
>> + {0x2A08, "Priority changed"},
>> + {0x2A09, "Capacity data has changed"},
>> + {0x2A0A, "Error history I_T nexus cleared"},
>> + {0x2A0B, "Error history snapshot released"},
>> + {0x2A0C, "Error recovery attributes have changed"},
>> + {0x2A0D, "Data encryption capabilities changed"},
>> + {0x2A10, "Timestamp changed"},
>> + {0x2A11, "Data encryption parameters changed by another i_t nexus"},
>> + {0x2A12, "Data encryption parameters changed by vendor specific "
>> + "event"},
>> + {0x2A13, "Data encryption key instance counter has changed"},
>> + {0x2A14, "SA creation capabilities data has changed"},
>> + {0x2A15, "Medium removal prevention preempted"},
>> +
>> + {0x2B00, "Copy cannot execute since host cannot disconnect"},
>> +
>> + {0x2C00, "Command sequence error"},
>> + {0x2C01, "Too many windows specified"},
>> + {0x2C02, "Invalid combination of windows specified"},
>> + {0x2C03, "Current program area is not empty"},
>> + {0x2C04, "Current program area is empty"},
>> + {0x2C05, "Illegal power condition request"},
>> + {0x2C06, "Persistent prevent conflict"},
>> + {0x2C07, "Previous busy status"},
>> + {0x2C08, "Previous task set full status"},
>> + {0x2C09, "Previous reservation conflict status"},
>> + {0x2C0A, "Partition or collection contains user objects"},
>> + {0x2C0B, "Not reserved"},
>> + {0x2C0C, "Orwrite generation does not match"},
>> +
>> + {0x2D00, "Overwrite error on update in place"},
>> +
>> + {0x2E00, "Insufficient time for operation"},
>> +
>> + {0x2F00, "Commands cleared by another initiator"},
>> + {0x2F01, "Commands cleared by power loss notification"},
>> + {0x2F02, "Commands cleared by device server"},
>> + {0x2F03, "Some commands cleared by queuing layer event"},
>> +
>> + {0x3000, "Incompatible medium installed"},
>> + {0x3001, "Cannot read medium - unknown format"},
>> + {0x3002, "Cannot read medium - incompatible format"},
>> + {0x3003, "Cleaning cartridge installed"},
>> + {0x3004, "Cannot write medium - unknown format"},
>> + {0x3005, "Cannot write medium - incompatible format"},
>> + {0x3006, "Cannot format medium - incompatible medium"},
>> + {0x3007, "Cleaning failure"},
>> + {0x3008, "Cannot write - application code mismatch"},
>> + {0x3009, "Current session not fixated for append"},
>> + {0x300A, "Cleaning request rejected"},
>> + {0x300C, "WORM medium - overwrite attempted"},
>> + {0x300D, "WORM medium - integrity check"},
>> + {0x3010, "Medium not formatted"},
>> + {0x3011, "Incompatible volume type"},
>> + {0x3012, "Incompatible volume qualifier"},
>> + {0x3013, "Cleaning volume expired"},
>> +
>> + {0x3100, "Medium format corrupted"},
>> + {0x3101, "Format command failed"},
>> + {0x3102, "Zoned formatting failed due to spare linking"},
>> + {0x3103, "Sanitize command failed"},
>> +
>> + {0x3200, "No defect spare location available"},
>> + {0x3201, "Defect list update failure"},
>> +
>> + {0x3300, "Tape length error"},
>> +
>> + {0x3400, "Enclosure failure"},
>> +
>> + {0x3500, "Enclosure services failure"},
>> + {0x3501, "Unsupported enclosure function"},
>> + {0x3502, "Enclosure services unavailable"},
>> + {0x3503, "Enclosure services transfer failure"},
>> + {0x3504, "Enclosure services transfer refused"},
>> + {0x3505, "Enclosure services checksum error"},
>> +
>> + {0x3600, "Ribbon, ink, or toner failure"},
>> +
>> + {0x3700, "Rounded parameter"},
>> +
>> + {0x3800, "Event status notification"},
>> + {0x3802, "Esn - power management class event"},
>> + {0x3804, "Esn - media class event"},
>> + {0x3806, "Esn - device busy class event"},
>> + {0x3807, "Thin Provisioning soft threshold reached"},
>> +
>> + {0x3900, "Saving parameters not supported"},
>> +
>> + {0x3A00, "Medium not present"},
>> + {0x3A01, "Medium not present - tray closed"},
>> + {0x3A02, "Medium not present - tray open"},
>> + {0x3A03, "Medium not present - loadable"},
>> + {0x3A04, "Medium not present - medium auxiliary memory accessible"},
>> +
>> + {0x3B00, "Sequential positioning error"},
>> + {0x3B01, "Tape position error at beginning-of-medium"},
>> + {0x3B02, "Tape position error at end-of-medium"},
>> + {0x3B03, "Tape or electronic vertical forms unit not ready"},
>> + {0x3B04, "Slew failure"},
>> + {0x3B05, "Paper jam"},
>> + {0x3B06, "Failed to sense top-of-form"},
>> + {0x3B07, "Failed to sense bottom-of-form"},
>> + {0x3B08, "Reposition error"},
>> + {0x3B09, "Read past end of medium"},
>> + {0x3B0A, "Read past beginning of medium"},
>> + {0x3B0B, "Position past end of medium"},
>> + {0x3B0C, "Position past beginning of medium"},
>> + {0x3B0D, "Medium destination element full"},
>> + {0x3B0E, "Medium source element empty"},
>> + {0x3B0F, "End of medium reached"},
>> + {0x3B11, "Medium magazine not accessible"},
>> + {0x3B12, "Medium magazine removed"},
>> + {0x3B13, "Medium magazine inserted"},
>> + {0x3B14, "Medium magazine locked"},
>> + {0x3B15, "Medium magazine unlocked"},
>> + {0x3B16, "Mechanical positioning or changer error"},
>> + {0x3B17, "Read past end of user object"},
>> + {0x3B18, "Element disabled"},
>> + {0x3B19, "Element enabled"},
>> + {0x3B1A, "Data transfer device removed"},
>> + {0x3B1B, "Data transfer device inserted"},
>> + {0x3B1C, "Too many logical objects on partition to support "
>> + "operation"},
>> +
>> + {0x3D00, "Invalid bits in identify message"},
>> +
>> + {0x3E00, "Logical unit has not self-configured yet"},
>> + {0x3E01, "Logical unit failure"},
>> + {0x3E02, "Timeout on logical unit"},
>> + {0x3E03, "Logical unit failed self-test"},
>> + {0x3E04, "Logical unit unable to update self-test log"},
>> +
>> + {0x3F00, "Target operating conditions have changed"},
>> + {0x3F01, "Microcode has been changed"},
>> + {0x3F02, "Changed operating definition"},
>> + {0x3F03, "Inquiry data has changed"},
>> + {0x3F04, "Component device attached"},
>> + {0x3F05, "Device identifier changed"},
>> + {0x3F06, "Redundancy group created or modified"},
>> + {0x3F07, "Redundancy group deleted"},
>> + {0x3F08, "Spare created or modified"},
>> + {0x3F09, "Spare deleted"},
>> + {0x3F0A, "Volume set created or modified"},
>> + {0x3F0B, "Volume set deleted"},
>> + {0x3F0C, "Volume set deassigned"},
>> + {0x3F0D, "Volume set reassigned"},
>> + {0x3F0E, "Reported luns data has changed"},
>> + {0x3F0F, "Echo buffer overwritten"},
>> + {0x3F10, "Medium loadable"},
>> + {0x3F11, "Medium auxiliary memory accessible"},
>> + {0x3F12, "iSCSI IP address added"},
>> + {0x3F13, "iSCSI IP address removed"},
>> + {0x3F14, "iSCSI IP address changed"},
>> + {0x3F15, "Inspect referrals sense descriptors"},
>> +/*
>> + * {0x40NN, "Ram failure"},
>> + * {0x40NN, "Diagnostic failure on component nn"},
>> + * {0x41NN, "Data path failure"},
>> + * {0x42NN, "Power-on or self-test failure"},
>> + */
>> + {0x4300, "Message error"},
>> +
>> + {0x4400, "Internal target failure"},
>> + {0x4401, "Persistent reservation information lost"},
>> + {0x4471, "ATA device failed set features"},
>> +
>> + {0x4500, "Select or reselect failure"},
>> +
>> + {0x4600, "Unsuccessful soft reset"},
>> +
>> + {0x4700, "Scsi parity error"},
>> + {0x4701, "Data phase CRC error detected"},
>> + {0x4702, "Scsi parity error detected during st data phase"},
>> + {0x4703, "Information unit iuCRC error detected"},
>> + {0x4704, "Asynchronous information protection error detected"},
>> + {0x4705, "Protocol service CRC error"},
>> + {0x4706, "Phy test function in progress"},
>> + {0x477f, "Some commands cleared by iSCSI Protocol event"},
>> +
>> + {0x4800, "Initiator detected error message received"},
>> +
>> + {0x4900, "Invalid message error"},
>> +
>> + {0x4A00, "Command phase error"},
>> +
>> + {0x4B00, "Data phase error"},
>> + {0x4B01, "Invalid target port transfer tag received"},
>> + {0x4B02, "Too much write data"},
>> + {0x4B03, "Ack/nak timeout"},
>> + {0x4B04, "Nak received"},
>> + {0x4B05, "Data offset error"},
>> + {0x4B06, "Initiator response timeout"},
>> + {0x4B07, "Connection lost"},
>> + {0x4B08, "Data-in buffer overflow - data buffer size"},
>> + {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
>> + {0x4B0A, "Data-in buffer error"},
>> + {0x4B0B, "Data-out buffer overflow - data buffer size"},
>> + {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
>> + {0x4B0D, "Data-out buffer error"},
>> + {0x4B0E, "PCIe fabric error"},
>> + {0x4B0F, "PCIe completion timeout"},
>> + {0x4B10, "PCIe completer abort"},
>> + {0x4B11, "PCIe poisoned tlp received"},
>> + {0x4B12, "PCIe eCRC check failed"},
>> + {0x4B13, "PCIe unsupported request"},
>> + {0x4B14, "PCIe acs violation"},
>> + {0x4B15, "PCIe tlp prefix blocked"},
>> +
>> + {0x4C00, "Logical unit failed self-configuration"},
>> +/*
>> + * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
>> + */
>> + {0x4E00, "Overlapped commands attempted"},
>> +
>> + {0x5000, "Write append error"},
>> + {0x5001, "Write append position error"},
>> + {0x5002, "Position error related to timing"},
>> +
>> + {0x5100, "Erase failure"},
>> + {0x5101, "Erase failure - incomplete erase operation detected"},
>> +
>> + {0x5200, "Cartridge fault"},
>> +
>> + {0x5300, "Media load or eject failed"},
>> + {0x5301, "Unload tape failure"},
>> + {0x5302, "Medium removal prevented"},
>> + {0x5303, "Medium removal prevented by data transfer element"},
>> + {0x5304, "Medium thread or unthread failure"},
>> + {0x5305, "Volume identifier invalid"},
>> + {0x5306, "Volume identifier missing"},
>> + {0x5307, "Duplicate volume identifier"},
>> + {0x5308, "Element status unknown"},
>> +
>> + {0x5400, "Scsi to host system interface failure"},
>> +
>> + {0x5500, "System resource failure"},
>> + {0x5501, "System buffer full"},
>> + {0x5502, "Insufficient reservation resources"},
>> + {0x5503, "Insufficient resources"},
>> + {0x5504, "Insufficient registration resources"},
>> + {0x5505, "Insufficient access control resources"},
>> + {0x5506, "Auxiliary memory out of space"},
>> + {0x5507, "Quota error"},
>> + {0x5508, "Maximum number of supplemental decryption keys exceeded"},
>> + {0x5509, "Medium auxiliary memory not accessible"},
>> + {0x550A, "Data currently unavailable"},
>> + {0x550B, "Insufficient power for operation"},
>> + {0x550C, "Insufficient resources to create rod"},
>> + {0x550D, "Insufficient resources to create rod token"},
>> +
>> + {0x5700, "Unable to recover table-of-contents"},
>> +
>> + {0x5800, "Generation does not exist"},
>> +
>> + {0x5900, "Updated block read"},
>> +
>> + {0x5A00, "Operator request or state change input"},
>> + {0x5A01, "Operator medium removal request"},
>> + {0x5A02, "Operator selected write protect"},
>> + {0x5A03, "Operator selected write permit"},
>> +
>> + {0x5B00, "Log exception"},
>> + {0x5B01, "Threshold condition met"},
>> + {0x5B02, "Log counter at maximum"},
>> + {0x5B03, "Log list codes exhausted"},
>> +
>> + {0x5C00, "Rpl status change"},
>> + {0x5C01, "Spindles synchronized"},
>> + {0x5C02, "Spindles not synchronized"},
>> +
>> + {0x5D00, "Failure prediction threshold exceeded"},
>> + {0x5D01, "Media failure prediction threshold exceeded"},
>> + {0x5D02, "Logical unit failure prediction threshold exceeded"},
>> + {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
>> + {0x5D10, "Hardware impending failure general hard drive failure"},
>> + {0x5D11, "Hardware impending failure drive error rate too high"},
>> + {0x5D12, "Hardware impending failure data error rate too high"},
>> + {0x5D13, "Hardware impending failure seek error rate too high"},
>> + {0x5D14, "Hardware impending failure too many block reassigns"},
>> + {0x5D15, "Hardware impending failure access times too high"},
>> + {0x5D16, "Hardware impending failure start unit times too high"},
>> + {0x5D17, "Hardware impending failure channel parametrics"},
>> + {0x5D18, "Hardware impending failure controller detected"},
>> + {0x5D19, "Hardware impending failure throughput performance"},
>> + {0x5D1A, "Hardware impending failure seek time performance"},
>> + {0x5D1B, "Hardware impending failure spin-up retry count"},
>> + {0x5D1C, "Hardware impending failure drive calibration retry
>> count"},
>> + {0x5D20, "Controller impending failure general hard drive failure"},
>> + {0x5D21, "Controller impending failure drive error rate too high"},
>> + {0x5D22, "Controller impending failure data error rate too high"},
>> + {0x5D23, "Controller impending failure seek error rate too high"},
>> + {0x5D24, "Controller impending failure too many block reassigns"},
>> + {0x5D25, "Controller impending failure access times too high"},
>> + {0x5D26, "Controller impending failure start unit times too high"},
>> + {0x5D27, "Controller impending failure channel parametrics"},
>> + {0x5D28, "Controller impending failure controller detected"},
>> + {0x5D29, "Controller impending failure throughput performance"},
>> + {0x5D2A, "Controller impending failure seek time performance"},
>> + {0x5D2B, "Controller impending failure spin-up retry count"},
>> + {0x5D2C, "Controller impending failure drive calibration retry
>> count"},
>> + {0x5D30, "Data channel impending failure general hard drive
>> failure"},
>> + {0x5D31, "Data channel impending failure drive error rate too
>> high"},
>> + {0x5D32, "Data channel impending failure data error rate too high"},
>> + {0x5D33, "Data channel impending failure seek error rate too high"},
>> + {0x5D34, "Data channel impending failure too many block reassigns"},
>> + {0x5D35, "Data channel impending failure access times too high"},
>> + {0x5D36, "Data channel impending failure start unit times too
>> high"},
>> + {0x5D37, "Data channel impending failure channel parametrics"},
>> + {0x5D38, "Data channel impending failure controller detected"},
>> + {0x5D39, "Data channel impending failure throughput performance"},
>> + {0x5D3A, "Data channel impending failure seek time performance"},
>> + {0x5D3B, "Data channel impending failure spin-up retry count"},
>> + {0x5D3C, "Data channel impending failure drive calibration retry "
>> + "count"},
>> + {0x5D40, "Servo impending failure general hard drive failure"},
>> + {0x5D41, "Servo impending failure drive error rate too high"},
>> + {0x5D42, "Servo impending failure data error rate too high"},
>> + {0x5D43, "Servo impending failure seek error rate too high"},
>> + {0x5D44, "Servo impending failure too many block reassigns"},
>> + {0x5D45, "Servo impending failure access times too high"},
>> + {0x5D46, "Servo impending failure start unit times too high"},
>> + {0x5D47, "Servo impending failure channel parametrics"},
>> + {0x5D48, "Servo impending failure controller detected"},
>> + {0x5D49, "Servo impending failure throughput performance"},
>> + {0x5D4A, "Servo impending failure seek time performance"},
>> + {0x5D4B, "Servo impending failure spin-up retry count"},
>> + {0x5D4C, "Servo impending failure drive calibration retry count"},
>> + {0x5D50, "Spindle impending failure general hard drive failure"},
>> + {0x5D51, "Spindle impending failure drive error rate too high"},
>> + {0x5D52, "Spindle impending failure data error rate too high"},
>> + {0x5D53, "Spindle impending failure seek error rate too high"},
>> + {0x5D54, "Spindle impending failure too many block reassigns"},
>> + {0x5D55, "Spindle impending failure access times too high"},
>> + {0x5D56, "Spindle impending failure start unit times too high"},
>> + {0x5D57, "Spindle impending failure channel parametrics"},
>> + {0x5D58, "Spindle impending failure controller detected"},
>> + {0x5D59, "Spindle impending failure throughput performance"},
>> + {0x5D5A, "Spindle impending failure seek time performance"},
>> + {0x5D5B, "Spindle impending failure spin-up retry count"},
>> + {0x5D5C, "Spindle impending failure drive calibration retry count"},
>> + {0x5D60, "Firmware impending failure general hard drive failure"},
>> + {0x5D61, "Firmware impending failure drive error rate too high"},
>> + {0x5D62, "Firmware impending failure data error rate too high"},
>> + {0x5D63, "Firmware impending failure seek error rate too high"},
>> + {0x5D64, "Firmware impending failure too many block reassigns"},
>> + {0x5D65, "Firmware impending failure access times too high"},
>> + {0x5D66, "Firmware impending failure start unit times too high"},
>> + {0x5D67, "Firmware impending failure channel parametrics"},
>> + {0x5D68, "Firmware impending failure controller detected"},
>> + {0x5D69, "Firmware impending failure throughput performance"},
>> + {0x5D6A, "Firmware impending failure seek time performance"},
>> + {0x5D6B, "Firmware impending failure spin-up retry count"},
>> + {0x5D6C, "Firmware impending failure drive calibration retry
>> count"},
>> + {0x5DFF, "Failure prediction threshold exceeded (false)"},
>> +
>> + {0x5E00, "Low power condition on"},
>> + {0x5E01, "Idle condition activated by timer"},
>> + {0x5E02, "Standby condition activated by timer"},
>> + {0x5E03, "Idle condition activated by command"},
>> + {0x5E04, "Standby condition activated by command"},
>> + {0x5E05, "Idle_b condition activated by timer"},
>> + {0x5E06, "Idle_b condition activated by command"},
>> + {0x5E07, "Idle_c condition activated by timer"},
>> + {0x5E08, "Idle_c condition activated by command"},
>> + {0x5E09, "Standby_y condition activated by timer"},
>> + {0x5E0A, "Standby_y condition activated by command"},
>> + {0x5E41, "Power state change to active"},
>> + {0x5E42, "Power state change to idle"},
>> + {0x5E43, "Power state change to standby"},
>> + {0x5E45, "Power state change to sleep"},
>> + {0x5E47, "Power state change to device control"},
>> +
>> + {0x6000, "Lamp failure"},
>> +
>> + {0x6100, "Video acquisition error"},
>> + {0x6101, "Unable to acquire video"},
>> + {0x6102, "Out of focus"},
>> +
>> + {0x6200, "Scan head positioning error"},
>> +
>> + {0x6300, "End of user area encountered on this track"},
>> + {0x6301, "Packet does not fit in available space"},
>> +
>> + {0x6400, "Illegal mode for this track"},
>> + {0x6401, "Invalid packet size"},
>> +
>> + {0x6500, "Voltage fault"},
>> +
>> + {0x6600, "Automatic document feeder cover up"},
>> + {0x6601, "Automatic document feeder lift up"},
>> + {0x6602, "Document jam in automatic document feeder"},
>> + {0x6603, "Document miss feed automatic in document feeder"},
>> +
>> + {0x6700, "Configuration failure"},
>> + {0x6701, "Configuration of incapable logical units failed"},
>> + {0x6702, "Add logical unit failed"},
>> + {0x6703, "Modification of logical unit failed"},
>> + {0x6704, "Exchange of logical unit failed"},
>> + {0x6705, "Remove of logical unit failed"},
>> + {0x6706, "Attachment of logical unit failed"},
>> + {0x6707, "Creation of logical unit failed"},
>> + {0x6708, "Assign failure occurred"},
>> + {0x6709, "Multiply assigned logical unit"},
>> + {0x670A, "Set target port groups command failed"},
>> + {0x670B, "ATA device feature not enabled"},
>> +
>> + {0x6800, "Logical unit not configured"},
>> + {0x6801, "Subsidiary logical unit not configured"},
>> +
>> + {0x6900, "Data loss on logical unit"},
>> + {0x6901, "Multiple logical unit failures"},
>> + {0x6902, "Parity/data mismatch"},
>> +
>> + {0x6A00, "Informational, refer to log"},
>> +
>> + {0x6B00, "State change has occurred"},
>> + {0x6B01, "Redundancy level got better"},
>> + {0x6B02, "Redundancy level got worse"},
>> + {0x6C00, "Rebuild failure occurred"},
>> +
>> + {0x6D00, "Recalculate failure occurred"},
>> +
>> + {0x6E00, "Command to logical unit failed"},
>> +
>> + {0x6F00, "Copy protection key exchange failure - authentication "
>> + "failure"},
>> + {0x6F01, "Copy protection key exchange failure - key not present"},
>> + {0x6F02, "Copy protection key exchange failure - key not
>> established"},
>> + {0x6F03, "Read of scrambled sector without authentication"},
>> + {0x6F04, "Media region code is mismatched to logical unit region"},
>> + {0x6F05, "Drive region must be permanent/region reset count error"},
>> + {0x6F06, "Insufficient block count for binding nonce recording"},
>> + {0x6F07, "Conflict in binding nonce recording"},
>> +/*
>> + * {0x70NN, "Decompression exception short algorithm id of nn"},
>> + */
>> + {0x7100, "Decompression exception long algorithm id"},
>> +
>> + {0x7200, "Session fixation error"},
>> + {0x7201, "Session fixation error writing lead-in"},
>> + {0x7202, "Session fixation error writing lead-out"},
>> + {0x7203, "Session fixation error - incomplete track in session"},
>> + {0x7204, "Empty or partially written reserved track"},
>> + {0x7205, "No more track reservations allowed"},
>> + {0x7206, "RMZ extension is not allowed"},
>> + {0x7207, "No more test zone extensions are allowed"},
>> +
>> + {0x7300, "Cd control error"},
>> + {0x7301, "Power calibration area almost full"},
>> + {0x7302, "Power calibration area is full"},
>> + {0x7303, "Power calibration area error"},
>> + {0x7304, "Program memory area update failure"},
>> + {0x7305, "Program memory area is full"},
>> + {0x7306, "RMA/PMA is almost full"},
>> + {0x7310, "Current power calibration area almost full"},
>> + {0x7311, "Current power calibration area is full"},
>> + {0x7317, "RDZ is full"},
>> +
>> + {0x7400, "Security error"},
>> + {0x7401, "Unable to decrypt data"},
>> + {0x7402, "Unencrypted data encountered while decrypting"},
>> + {0x7403, "Incorrect data encryption key"},
>> + {0x7404, "Cryptographic integrity validation failed"},
>> + {0x7405, "Error decrypting data"},
>> + {0x7406, "Unknown signature verification key"},
>> + {0x7407, "Encryption parameters not useable"},
>> + {0x7408, "Digital signature validation failure"},
>> + {0x7409, "Encryption mode mismatch on read"},
>> + {0x740A, "Encrypted block not raw read enabled"},
>> + {0x740B, "Incorrect Encryption parameters"},
>> + {0x740C, "Unable to decrypt parameter list"},
>> + {0x740D, "Encryption algorithm disabled"},
>> + {0x7410, "SA creation parameter value invalid"},
>> + {0x7411, "SA creation parameter value rejected"},
>> + {0x7412, "Invalid SA usage"},
>> + {0x7421, "Data Encryption configuration prevented"},
>> + {0x7430, "SA creation parameter not supported"},
>> + {0x7440, "Authentication failed"},
>> + {0x7461, "External data encryption key manager access error"},
>> + {0x7462, "External data encryption key manager error"},
>> + {0x7463, "External data encryption key not found"},
>> + {0x7464, "External data encryption request not authorized"},
>> + {0x746E, "External data encryption control timeout"},
>> + {0x746F, "External data encryption control error"},
>> + {0x7471, "Logical unit access not authorized"},
>> + {0x7479, "Security conflict in translated device"},
>> +
>> + {0, NULL}
>> +};
>> +
>> +struct error_info2 {
>> + unsigned char code1, code2_min, code2_max;
>> + const char * fmt;
>> +};
>> +
>> +static const struct error_info2 additional2[] = {
>> + {0x40, 0x00, 0x7f, "Ram failure (%x)"},
>> + {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
>> + {0x41, 0x00, 0xff, "Data path failure (%x)"},
>> + {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
>> + {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
>> + {0x70, 0x00, 0xff, "Decompression exception short algorithm id of
>> %x"},
>> + {0, 0, 0, NULL}
>> +};
>> +
>> /* description of the sense key values */
>> static const char * const snstext[] = {
>> "No Sense", /* 0: There is no sense information */
>> @@ -342,6 +1178,65 @@ scsi_sense_format_string(u8 res_code)
>> return res_code >= 0x72 ? "[descriptor]" : "";
>> }
>>
>> +/*
>> + * Get additional sense code string or NULL if not available.
>> + * This string may contain a "%x" and should be printed with ascq as
>> arg.
>> + */
>> +const char *
>> +scsi_extd_sense_format(u8 asc, u8 ascq) {
>> +#ifdef CONFIG_SCSI_CONSTANTS
>> + int i;
>> + unsigned short code = ((asc << 8) | ascq);
>> +
>> + for (i = 0; additional[i].text; i++)
>> + if (additional[i].code12 == code)
>> + return additional[i].text;
>> + for (i = 0; additional2[i].fmt; i++) {
>> + if (additional2[i].code1 == asc &&
>> + ascq >= additional2[i].code2_min &&
>> + ascq <= additional2[i].code2_max)
>> + return additional2[i].fmt;
>> + }
>> +#endif
>> + return NULL;
>> +}
>> +EXPORT_SYMBOL(scsi_extd_sense_format);
>> +
>> +const char *
>> +scsi_show_extd_sense(struct trace_seq *p, u8 asc, u8 ascq)
>> +{
>> + const char *ret = p->buffer + p->len;
>> + const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
>> +
>> + if (extd_sense_fmt) {
>> + if (strstr(extd_sense_fmt, "%x")) {
>> + char sense_buf[50];
>> +
>> + sprintf(sense_buf, extd_sense_fmt, ascq);
>> + trace_seq_printf(p, " Add. Sense (%s)", sense_buf);
>> + } else
>> + trace_seq_printf(p, " Add. Sense (%s)", extd_sense_fmt);
>> + } else
>> + trace_seq_printf(p, " %sASC=0x%x %sASCQ=0x%x",
>> + asc >= 0x80 ? "<<vendor>> " : "", asc,
>> + asc < 0 && ascq >= 0x80 ? "<<vendor>> " : "",
>> + ascq);
>> +
>> + trace_seq_putc(p, 0);
>> + return ret;
>> +}
>> +
>> +/*
>> + * Print normalized SCSI sense header with a prefix.
>> + */
>> +void
>> +scsi_print_sense_hdr(struct scsi_device *sdev, const char *name,
>> + struct scsi_sense_hdr *sshdr)
>> +{
>> + trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0);
>> +}
>> +EXPORT_SYMBOL(scsi_print_sense_hdr);
>> +
>> static const char *
>> scsi_dump_sense_buffer(struct trace_seq *p, const unsigned char
>> *buf, int len)
>> {
>> @@ -419,6 +1314,31 @@ out:
>> return ret;
>> }
>>
>> +/* Normalize and print sense buffer with name prefix */
>> +void __scsi_print_sense(struct scsi_device *sdev, const char *name,
>> + const unsigned char *sense_buffer, int sense_len)
>> +{
>> + struct scsi_sense_hdr sshdr;
>> + int raw;
>> +
>> + raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr);
>> +
>> + trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len,
>> + raw);
>> +}
>> +EXPORT_SYMBOL(__scsi_print_sense);
>> +
>> +/* Normalize and print sense buffer in SCSI command */
>> +void scsi_print_sense(struct scsi_cmnd *cmd)
>> +{
>> + const char *devname = cmd->request->rq_disk ?
>> + cmd->request->rq_disk->disk_name : "scsi";
>> +
>> + __scsi_print_sense(cmd->device, devname, cmd->sense_buffer,
>> + SCSI_SENSE_BUFFERSIZE);
>> +}
>> +EXPORT_SYMBOL(scsi_print_sense);
>> +
>> void scsi_show_result(struct scsi_device *sdev, const char *name,
>> int result)
>> {
>> trace_scsi_show_result(sdev, name, result);
>> diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
>> index 68a29e4..67e6a89 100644
>> --- a/include/scsi/scsi_dbg.h
>> +++ b/include/scsi/scsi_dbg.h
>> @@ -8,8 +8,6 @@ struct scsi_device;
>> extern void scsi_print_command(struct scsi_cmnd *);
>> extern void __scsi_print_command(struct scsi_device *, const char *,
>> unsigned char *, int);
>> -extern void scsi_show_extd_sense(struct scsi_device *, const char *,
>> - unsigned char, unsigned char);
>> extern void scsi_print_sense_hdr(struct scsi_device *, const char *,
>> struct scsi_sense_hdr *);
>> extern void scsi_print_sense(struct scsi_cmnd *);
>> diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h
>> index 572aa65..6d3543f 100644
>> --- a/include/trace/events/scsi.h
>> +++ b/include/trace/events/scsi.h
>> @@ -400,6 +400,9 @@ const char *scsi_trace_decode_sense_extras(struct
>> trace_seq*, u8, u8,
>> #define __decode_extras(sense_key, res_code, buf, len, raw) \
>> scsi_trace_decode_sense_extras(p, sense_key, res_code, buf, len,
>> raw)
>>
>> +const char *scsi_show_extd_sense(struct trace_seq*, u8, u8);
>> +#define __extd_sense(asc, ascq) scsi_show_extd_sense(p, asc, ascq)
>> +
>> TRACE_EVENT(scsi_print_sense,
>>
>> TP_PROTO(struct scsi_device *sdev, const char *devname,
>> @@ -433,15 +436,18 @@ TRACE_EVENT(scsi_print_sense,
>> __entry->res_code = sshdr->response_code;
>> memcpy(__get_dynamic_array(sense_buffer), sense_buffer,
>> sense_len);
>> + __entry->asc = sshdr->asc;
>> + __entry->ascq = sshdr->ascq;
>> __entry->sense_len = sense_len;
>> __entry->raw = raw;
>> ),
>>
>> - TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s",
>> + TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s %s",
>> __entry->host_no, __entry->channel, __entry->id,
>> __entry->lun,
>> __get_str(devname), __decode_extras(__entry->sense_key,
>> __entry->res_code, __get_dynamic_array(sense_buffer),
>> - __entry->sense_len, __entry->raw))
>> + __entry->sense_len, __entry->raw),
>> + __extd_sense(__entry->asc, __entry->ascq))
>> );
>> #endif /* _TRACE_SCSI_H */
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> As discussed above, please use the existing functions from constants.c
> here.
OK, I'll use those.
Thanks,
Yoshihiro YUNOMAE
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: yoshihiro.yunomae.ez@...achi.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists