[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1409282570-27299-1-git-send-email-pramod.gurav@smartplayin.com>
Date: Thu, 28 Aug 2014 20:22:46 -0700
From: Pramod Gurav <pramod.gurav@...rtplayin.com>
To: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Pramod Gurav <pramod.gurav@...rtplayin.com>
Subject: [PATCH 0/4] Add reset support for apq8064
The reset on apq8064 is provided on gpio78 function1. We need to configure
gpio78 to function as ps_hold and write to base of the register to get the
device rebooted.
First two patches in this patchset adds necessary DT support for apq8064-pinctrl
and DT support to mux gpio_78 as ps_hold function.
Third patch documents the ps_hold function in apq8064-pinctrl DT binding
Fourth implements the actual reset by initialising arm_pm_restart to a reset
function if ps_hold function is programmed in the pinctrl driver.
This is v2 with below changes since v1:
1. Added #error log as suggested by Kumar Gala
2. Correct interrupts in DT from 32 to 16 based on Bjorn's new patch in bindings
3. Replaced hardcoding in DT with IRQ_TYPE_LEVEL_HIGH for interrupt level type
Pramod Gurav (4):
ARM: DT: APQ8064: Add pinctrl support
ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
pinctrl: msm: Add ps_hold function in pinctrl-apq8064 binding
documentation
pinctrl: qcom: Add support for reset for apq8064
.../bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 21 +++++++++++
drivers/pinctrl/qcom/pinctrl-apq8064.c | 7 +++-
drivers/pinctrl/qcom/pinctrl-msm.c | 38 ++++++++++++++++++++
4 files changed, 66 insertions(+), 2 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists