Linux version 3.16.1-bhyve (root@localhost) (gcc version 4.8.2 (Funtoo 4.8.2-r2) ) #22 SMP Fri Aug 29 12:23:32 Local time zone must be set--see zic
Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.1-bhyve root=/dev/vda1 ro console=ttyS0,38400 apic=debug show_lapic=all pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fffe] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bfffffff] usable
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
e820: last_pfn = 0xc0000 max_arch_pfn = 0x400000000
Scan for SMP in [mem 0x00000000-0x000003ff]
Scan for SMP in [mem 0x0009fc00-0x0009ffff]
Scan for SMP in [mem 0x000f0000-0x000fffff]
found SMP MP-table at [mem 0x000f0000-0x000f000f] mapped at [ffff8800000f0000]
  mpc: f0010-f0154
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
init_memory_mapping: [mem 0x100000000-0x13bffffff]
init_memory_mapping: [mem 0x00100000-0xbfffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F2400 000024 (v02 BHYVE )
ACPI: XSDT 0x00000000000F2480 000044 (v01 BHYVE  BVXSDT   00000001 INTL 20130823)
ACPI: APIC 0x00000000000F2500 000072 (v01 BHYVE  BVMADT   00000001 INTL 20130823)
ACPI: FACP 0x00000000000F2600 00010C (v05 BHYVE  BVFACP   00000001 INTL 20130823)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/50 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 50, using default 32 (20140424/tbfadt-699)
ACPI: DSDT 0x00000000000F2800 00091D (v02 BHYVE  BVDSDT   00000001 INTL 20130823)
ACPI: FACS 0x00000000000F27C0 000040
ACPI: HPET 0x00000000000F2740 000038 (v01 BHYVE  BVHPET   00000001 INTL 20130823)
ACPI: q 0 global_irq 2 high edge)
Int: type 0, pol 1, trig 1, bus 00, IRQ 00, APIC ID 0, APIC INT 02
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 0, APIC INT 05
Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x80868701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
mapped IOAPIC to ffffffffff5fc000 (fec00000)
e820: [mem 0xc0000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s72320 r8192 d21888 u524288
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032073
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.1-bhyve root=/dev/vda1 ro console=ttyS0,38400 apic=debug show_lapic=all pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 4053884K/4193912K available (3648K kernel code, 411K rwdata, 1176K rodata, 780K init, 476K bss, 140028K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:712 16
Using NULL legacy PIC
Console: colour dummy device 80x25
console [ttyS0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3391.709 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.41 BogoMIPS (lpj=13566836)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 16K (ffffffff8172b000 - ffffffff8172f000)
Getting VERSION: 60010
Getting VERSION: 60010
Getting ID: 0
Getting ID: 0
masked ExtINT on CPU#0
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
Using local APIC timer interrupts.
calibrating APIC timer ...
[hangs here]