[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1409317663-31160-4-git-send-email-sojka@merica.cz>
Date: Fri, 29 Aug 2014 15:07:43 +0200
From: Michal Sojka <sojka@...ica.cz>
To: linux-usb@...r.kernel.org
Cc: Michal Sojka <sojka@...ica.cz>,
Alan Stern <stern@...land.harvard.edu>,
Bryan Wu <cooloney@...il.com>, Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linux LED Subsystem <linux-leds@...r.kernel.org>,
linux-kernel@...r.kernel.org, michal.vokac@...ap.cz
Subject: [PATCH v5 3/3] usb: Add LED triggers for USB activity
With this patch, USB activity can be signaled by blinking a LED. There
are two triggers, one for activity on USB host and one for USB gadget.
Both triggers should work with all host/device controllers. Tested only
with musb.
Performace: I measured performance overheads on ARM Cortex-A8 (TI
AM335x) running on 600 MHz.
Duration of usb_led_activity():
- with no LED attached to the trigger: 2 ± 1 µs
- with one GPIO LED attached to the trigger: 2 ± 1 µs or 8 ± 2 µs (two peaks in histogram)
Duration of functions calling usb_led_activity() (with this patch
applied and no LED attached to the trigger):
- __usb_hcd_giveback_urb(): 10 - 25 µs
- usb_gadget_giveback_request(): 2 - 6 µs
Signed-off-by: Michal Sojka <sojka@...ica.cz>
---
drivers/usb/Kconfig | 10 +++++++
drivers/usb/common/Makefile | 1 +
drivers/usb/common/led.c | 57 +++++++++++++++++++++++++++++++++++++++
drivers/usb/core/hcd.c | 2 ++
drivers/usb/gadget/udc/udc-core.c | 4 +++
include/linux/usb.h | 12 +++++++++
6 files changed, 86 insertions(+)
create mode 100644 drivers/usb/common/led.c
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index e0cad441..9d9cc3b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -147,4 +147,14 @@ source "drivers/usb/phy/Kconfig"
source "drivers/usb/gadget/Kconfig"
+config USB_LED_TRIG
+ bool "USB LED Triggers"
+ depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+ help
+ This option adds LED triggers for USB host and/or gadget activity.
+
+ Say Y here if you are working on a system with led-class supported
+ LEDs and you want to use them as activity indicators for USB host or
+ gadget.
+
endif # USB_SUPPORT
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index 052c120..ca2f8bd 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_USB_COMMON) += usb-common.o
usb-common-y += common.o
+usb-common-$(CONFIG_USB_LED_TRIG) += led.o
obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c
new file mode 100644
index 0000000..df23da0
--- /dev/null
+++ b/drivers/usb/common/led.c
@@ -0,0 +1,57 @@
+/*
+ * LED Triggers for USB Activity
+ *
+ * Copyright 2014 Michal Sojka <sojka@...ica.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/usb.h>
+
+#define BLINK_DELAY 30
+
+static unsigned long usb_blink_delay = BLINK_DELAY;
+
+DEFINE_LED_TRIGGER(ledtrig_usb_gadget);
+DEFINE_LED_TRIGGER(ledtrig_usb_host);
+
+void usb_led_activity(enum usb_led_event ev)
+{
+ struct led_trigger *trig = NULL;
+
+ switch (ev) {
+ case USB_LED_EVENT_GADGET:
+ trig = ledtrig_usb_gadget;
+ break;
+ case USB_LED_EVENT_HOST:
+ trig = ledtrig_usb_host;
+ break;
+ }
+ /* led_trigger_blink_oneshot() handles trig == NULL gracefully */
+ led_trigger_blink_oneshot(trig, &usb_blink_delay, &usb_blink_delay, 0);
+}
+EXPORT_SYMBOL_GPL(usb_led_activity);
+
+
+static int __init ledtrig_usb_init(void)
+{
+ led_trigger_register_simple("usb-gadget", &ledtrig_usb_gadget);
+ led_trigger_register_simple("usb-host", &ledtrig_usb_host);
+ return 0;
+}
+
+static void __exit ledtrig_usb_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_usb_gadget);
+ led_trigger_unregister_simple(ledtrig_usb_host);
+}
+
+module_init(ledtrig_usb_init);
+module_exit(ledtrig_usb_exit);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 487abcf..409cb95 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1664,6 +1664,8 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
usbmon_urb_complete(&hcd->self, urb, status);
usb_anchor_suspend_wakeups(anchor);
usb_unanchor_urb(urb);
+ if (likely(status == 0))
+ usb_led_activity(USB_LED_EVENT_HOST);
/* pass ownership to the completion handler */
urb->status = status;
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 29789f1..f272cf0 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -27,6 +27,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb.h>
/**
* struct usb_udc - describes one usb device controller
@@ -116,6 +117,9 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
void usb_gadget_giveback_request(struct usb_ep *ep,
struct usb_request *req)
{
+ if (likely(req->status == 0))
+ usb_led_activity(USB_LED_EVENT_GADGET);
+
if (likely(req->complete))
req->complete(ep, req);
else
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d2465bc..447a7e2 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1862,6 +1862,18 @@ extern void usb_unregister_notify(struct notifier_block *nb);
/* debugfs stuff */
extern struct dentry *usb_debug_root;
+/* LED triggers */
+enum usb_led_event {
+ USB_LED_EVENT_HOST = 0,
+ USB_LED_EVENT_GADGET = 1,
+};
+
+#ifdef CONFIG_USB_LED_TRIG
+extern void usb_led_activity(enum usb_led_event ev);
+#else
+static inline void usb_led_activity(enum usb_led_event ev) {}
+#endif
+
#endif /* __KERNEL__ */
#endif
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists