| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Aug 2014 19:02:54 +0530
From: Pramod Gurav <pramod.gurav@...rtplayin.com>
To: Bjorn Andersson <bjorn.andersson@...ymobile.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Linus Walleij <linus.walleij@...aro.org>,
"Ivan T. Ivanov" <iivanov@...sol.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Andy Gross <agross@...eaurora.org>
Subject: Re: [PATCH 4/4] pinctrl: qcom: Add support for reset for apq8064
Hi Bjorn,
On 29-08-2014 06:58 AM, Bjorn Andersson wrote:
> On Thu 28 Aug 20:22 PDT 2014, Pramod Gurav wrote:
>
>> This patch adds support for reset functions to reboot the boards
>> with soc apq8064.
>>
>> CC: Linus Walleij <linus.walleij@...aro.org>
>> CC: Bjorn Andersson <bjorn.andersson@...ymobile.com>
>> CC: "Ivan T. Ivanov" <iivanov@...sol.com>
>> CC: Stephen Boyd <sboyd@...eaurora.org>
>> CC: Andy Gross <agross@...eaurora.org>
>> Signed-off-by: Pramod Gurav <pramod.gurav@...rtplayin.com>
>> ---
>> drivers/pinctrl/qcom/pinctrl-apq8064.c | 7 +++++-
>> drivers/pinctrl/qcom/pinctrl-msm.c | 38 ++++++++++++++++++++++++++++++++
>> 2 files changed, 44 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8064.c b/drivers/pinctrl/qcom/pinctrl-apq8064.c
>> index feb6f15..ef1263c 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-apq8064.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c
>> @@ -324,6 +324,7 @@ enum apq8064_functions {
>> APQ_MUX_tsif1,
>> APQ_MUX_tsif2,
>> APQ_MUX_usb2_hsic,
>> + APQ_MUX_ps_hold,
>> APQ_MUX_NA,
>> };
>>
>> @@ -351,6 +352,9 @@ static const char * const gpio_groups[] = {
>> "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
>> "gpio85", "gpio86", "gpio87", "gpio88", "gpio89"
>> };
>> +static const char * const ps_hold_groups[] = {
>> + "gpio78"
>> +};
>> static const char * const gsbi1_groups[] = {
>> "gpio18", "gpio19", "gpio20", "gpio21"
>> };
>> @@ -477,6 +481,7 @@ static const struct msm_function apq8064_functions[] = {
>> FUNCTION(tsif1),
>> FUNCTION(tsif2),
>> FUNCTION(usb2_hsic),
>> + FUNCTION(ps_hold),
>> };
>>
>> static const struct msm_pingroup apq8064_groups[] = {
>> @@ -558,7 +563,7 @@ static const struct msm_pingroup apq8064_groups[] = {
>> PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> - PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> + PINGROUP(78, ps_hold, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> PINGROUP(79, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
>> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
>> index 2738108..be43e7a 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
>> @@ -12,6 +12,7 @@
>> * GNU General Public License for more details.
>> */
>>
>> +#include <linux/delay.h>
>> #include <linux/err.h>
>> #include <linux/io.h>
>> #include <linux/module.h>
>> @@ -27,12 +28,17 @@
>> #include <linux/interrupt.h>
>> #include <linux/spinlock.h>
>>
>> +#include <asm/system_misc.h>
>> +
>> #include "../core.h"
>> #include "../pinconf.h"
>> #include "pinctrl-msm.h"
>> #include "../pinctrl-utils.h"
>>
>> #define MAX_NR_GPIO 300
>> +#define PS_HOLD_OFFSET 0x820
>> +
>> +static void __iomem *msm_ps_hold;
>>
>> /**
>> * struct msm_pinctrl - state for a pinctrl-msm device
>> @@ -848,10 +854,31 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
>> return 0;
>> }
>>
>> +static void qcom_reset(enum reboot_mode reboot_mode, const char *cmd)
>
> This doesn't follow the naming used in this.
>
>> +{
>> + writel(0, msm_ps_hold);
>> + mdelay(10000);
>
> Why 10 seconds? What happens after that?
This I copied from existing msm-poweroff.c driver for apq8074. Not sure
why such a long delay. I will exclude this from mine as I have no valid
reason.
>
>> +}
>> +
>> +const struct msm_function
>> +*find_pshold_function(const struct msm_function *functions,
>> + unsigned nfunctions, const char *name)
>
> This should be static. But that would cause a compile warning on non-ARM
> platforms, see below.
>
>> +{
>> + int i = 0;
>> + const struct msm_function *func;
>> +
>> + for (func = functions; i <= nfunctions; func++, i++)
>
> Why do you have 'func' and why do you iterate over that and i?
>
> for (i = 0; i < nfunctions; i++)
> if (strcmp(functions[i]->name, name) == 0)
> return true; (or &functions[i] if you really need it)
>
> But as you only uses this once I would prefer if you just merge in the setting
> of msm_ps_hold and arm_pm_restart here as well, see below.
>
>> + if (!strcmp(func->name, name))
>> + return func;
>> +
>> + return NULL;
>> +}
>> +
>> int msm_pinctrl_probe(struct platform_device *pdev,
>> const struct msm_pinctrl_soc_data *soc_data)
>> {
>> struct msm_pinctrl *pctrl;
>> + const struct msm_function *func;
>> struct resource *res;
>> int ret;
>>
>> @@ -871,6 +898,17 @@ int msm_pinctrl_probe(struct platform_device *pdev,
>> if (IS_ERR(pctrl->regs))
>> return PTR_ERR(pctrl->regs);
>>
>> +#ifdef CONFIG_ARM
>> + func = find_pshold_function(soc_data->functions,
>> + soc_data->nfunctions, "ps_hold");
>> + if (func) {
>> + dev_dbg(&pdev->dev, "Found Function %s\n", func->name);
>
> Guess what, it will print "ps_hold" here. I would prefer if you just skip this
> line, as this will always be true on 8960 and 8064.
>
>> + msm_ps_hold = pctrl->regs + PS_HOLD_OFFSET;
>> + arm_pm_restart = qcom_reset;
>> + }
>> +#else
>> +#error "not supported on this arch"
>
> There is no reason for you to break compilation of this driver on non-ARM
> platforms. This #else/#error should be removed.
>
> I would prefer if you did not #ifdef at all within the function, but rather
> merge this piece of logic with the search above into a static function that's
> surrounded by a check for CONFIG_ARM - providing a no-op for non-arm boards.
>
> I.e
>
> #ifdef CONFIG_ARM
> static void qcom_reset(enum reboot_mode reboot_mode, const char *cmd)
> {
> ...
> }
>
> static void msm_pinctrl_setup_pm_reset(pctrl)
> {
> ...
> }
> #else
> static void msm_pinctrl_setup_pm_reset(pctrl) {}
> #endif
Will put this in a single function which takes pctrl and address you
comments there in v3.
Thanks for review. :-)
>
>> +#endif
>
> Regards,
> Bjorn
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists