| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1409586223-5915-7-git-send-email-navin.patidar@gmail.com>
Date: Mon, 1 Sep 2014 21:13:42 +0530
From: navin patidar <navin.patidar@...il.com>
To: gregkh@...uxfoundation.org
Cc: Larry.Finger@...inger.net, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
navin patidar <navin.patidar@...il.com>
Subject: [PATCH 7/8] staging: rtl8188eu: Hal8188EPwrSeq.h: fix lines over 80 char
Signed-off-by: navin patidar <navin.patidar@...il.com>
---
drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h | 411 ++++++++++++++------
1 file changed, 288 insertions(+), 123 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
index fabb201..43db92d 100644
--- a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
@@ -47,130 +47,295 @@
PWR SEQ Version: rtl8188E_PwrSeq_V09.h
*/
-#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
-#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
-#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8188E_TRANS_END_STEPS 1
-
-
-#define RTL8188E_TRANS_CARDEMU_TO_ACT \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/ \
- {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/ \
-
-#define RTL8188E_TRANS_ACT_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
-
-#define RTL8188E_TRANS_CARDEMU_TO_SUS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
-
-#define RTL8188E_TRANS_SUS_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
-
-#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_PDN \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
-
-#define RTL8188E_TRANS_PDN_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * },
+ * comment here
+ */ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, \
+ /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
+ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, \
+ /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
+ /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*SDIO Driving*/
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * },
+ * comments here
+ */ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ /*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
+ /* 0x04[12:11] = 2b'01enable WL suspend */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, \
+ /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, BIT7}, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, 0}, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /*wait power state to suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, 0}, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, 0}, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /*wait power state to suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
+ /* 0x04[16] = 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
+ /* 0x04[15] = 0*/
/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
-#define RTL8188E_TRANS_ACT_TO_LPS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/ \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/ \
-
-
-#define RTL8188E_TRANS_LPS_TO_ACT \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
- {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
- {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
- {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*. 0x101[1] = 1*/\
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
-
-#define RTL8188E_TRANS_END \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, PWR_CMD_END, 0, 0}, /* */
-
-
-extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
+ /*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \
+ PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/\
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5}, \
+ /*Respond TxOK to scheduler*/
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
+ /* 0x08[4] = 0 switch TSF to 40M */ \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, \
+ /* Polling 0x109[7]=0 TSF in 40M */ \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, \
+ /* 0x29[7:6] = 2b'00 enable BB clock */ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
+ /* 0x101[1] = 1 */ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /* 0x100[7:0] = 0xFF enable WMAC TRX */ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, \
+ /* 0x02[1:0] = 2b'11 enable BB macro */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+#define RTL8188E_TRANS_END \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
+ PWR_CMD_END, 0, 0},
+
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow
+ [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[
+ RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow
+ [RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow
+ [RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
#endif /* __HAL8188EPWRSEQ_H__ */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists