Message-ID: <5405AE95.1020201@linaro.org>
Date:	Tue, 02 Sep 2014 13:48:37 +0200
From:	Tomasz Nowicki <tomasz.nowicki@...aro.org>
To:	Marc Zyngier <marc.zyngier@....com>,
	Hanjun Guo <hanjun.guo@...aro.org>
CC:	Catalin Marinas <Catalin.Marinas@....com>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Mark Rutland <Mark.Rutland@....com>,
	Olof Johansson <olof@...om.net>,
	"grant.likely@...aro.org" <grant.likely@...aro.org>,
	"graeme.gregory@...aro.org" <graeme.gregory@...aro.org>,
	Arnd Bergmann <arnd@...db.de>,
	Sudeep Holla <Sudeep.Holla@....com>,
	Will Deacon <Will.Deacon@....com>,
	Jason Cooper <jason@...edaemon.net>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Daniel Lezcano <daniel.lezcano@...aro.org>,
	Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>,
	Robert Richter <rric@...nel.org>,
	Lv Zheng <lv.zheng@...el.com>,
	Robert Moore <robert.moore@...el.com>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
	Liviu Dudau <Liviu.Dudau@....com>,
	Randy Dunlap <rdunlap@...radead.org>,
	Charles Garcia-Tobin <Charles.Garcia-Tobin@....com>,
	"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linaro-acpi@...ts.linaro.org" <linaro-acpi@...ts.linaro.org>
Subject: Re: [PATCH v3 13/17] ARM64 / ACPI: Add GICv2 specific ACPI boot support

On 01.09.2014 19:35, Marc Zyngier wrote:
> On 01/09/14 15:57, Hanjun Guo wrote:
>> From: Tomasz Nowicki <tomasz.nowicki@...aro.org>
>>
>> ACPI kernel uses MADT table for proper GIC initialization. It needs to
>> parse GIC related subtables, collect CPU interface and distributor
>> addresses and call driver initialization function (which is hardware
>> abstraction agnostic). In a similar way, FDT initialize GICv1/2.
>>
>> NOTE: This commit allow to initialize GICv1/2 only.
>
> I cannot help but notice that there is no support for KVM here. It'd be
> good to add a note to that effect, so that people do not expect
> virtualization support to be working when booting with ACPI.

yes, it is worth mentioning!

>
>> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@...aro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@...aro.org>
>> ---
>>   arch/arm64/include/asm/acpi.h        |    2 -
>>   arch/arm64/kernel/acpi.c             |   23 +++++++
>>   arch/arm64/kernel/irq.c              |    5 ++
>>   drivers/irqchip/irq-gic.c            |  114 ++++++++++++++++++++++++++++++++++
>>   include/linux/irqchip/arm-gic-acpi.h |   33 ++++++++++
>>   5 files changed, 175 insertions(+), 2 deletions(-)
>>   create mode 100644 include/linux/irqchip/arm-gic-acpi.h
>>
>> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
>> index a867467..5d2ab63 100644
>> --- a/arch/arm64/include/asm/acpi.h
>> +++ b/arch/arm64/include/asm/acpi.h
>> @@ -97,8 +97,6 @@ void __init acpi_smp_init_cpus(void);
>>   extern int (*acpi_suspend_lowlevel)(void);
>>   #define acpi_wakeup_address 0
>>
>> -#define ACPI_MAX_GIC_CPU_INTERFACE_ENTRIES 65535
>> -
>>   #else
>>
>>   static inline bool acpi_psci_present(void) { return false; }
>> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
>> index 354b912..b3b82b0 100644
>> --- a/arch/arm64/kernel/acpi.c
>> +++ b/arch/arm64/kernel/acpi.c
>> @@ -23,6 +23,7 @@
>>   #include <linux/irqdomain.h>
>>   #include <linux/bootmem.h>
>>   #include <linux/smp.h>
>> +#include <linux/irqchip/arm-gic-acpi.h>
>>
>>   #include <asm/cputype.h>
>>   #include <asm/cpu_ops.h>
>> @@ -313,6 +314,28 @@ void __init acpi_boot_table_init(void)
>>   		pr_err("Can't find FADT or error happened during parsing FADT\n");
>>   }
>>
>> +void __init acpi_gic_init(void)
>> +{
>> +	struct acpi_table_header *table;
>> +	acpi_status status;
>> +	acpi_size tbl_size;
>> +	int err;
>> +
>> +	status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
>> +	if (ACPI_FAILURE(status)) {
>> +		const char *msg = acpi_format_exception(status);
>> +
>> +		pr_err("Failed to get MADT table, %s\n", msg);
>> +		return;
>> +	}
>> +
>> +	err = gic_v2_acpi_init(table);
>> +	if (err)
>> +		pr_err("Failed to initialize GIC IRQ controller");
>
> What will happen when you get to implement GICv3 support? Another entry
> like this? Why isn't this entirely contained in the GIC driver? Do I
> sound like a stuck record?

There will be another call to GICv3 init:
[...]
	err = gic_v3_acpi_init(table);
	if (err)
		err = gic_v2_acpi_init(table);
	if (err)
		pr_err("Failed to initialize GIC IRQ controller");
[...]
This is the main reason I put common code here.

>
>> +
>> +	early_acpi_os_unmap_memory((char *)table, tbl_size);
>> +}
>> +
>>   /*
>>    * acpi_suspend_lowlevel() - save kernel state and suspend.
>>    *
>> diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
>> index 0f08dfd..c074d60 100644
>> --- a/arch/arm64/kernel/irq.c
>> +++ b/arch/arm64/kernel/irq.c
>> @@ -28,6 +28,7 @@
>>   #include <linux/irqchip.h>
>>   #include <linux/seq_file.h>
>>   #include <linux/ratelimit.h>
>> +#include <linux/irqchip/arm-gic-acpi.h>
>>
>>   unsigned long irq_err_count;
>>
>> @@ -78,6 +79,10 @@ void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
>>   void __init init_IRQ(void)
>>   {
>>   	irqchip_init();
>> +
>> +	if (!handle_arch_irq)
>> +		acpi_gic_init();
>> +
>
> Why isn't this called from irqchip_init? It would seem like the logical
> spot to probe an interrupt controller.

irqchip.c is OF dependent, I want to decouple these from the very 
beginning.

>
>>   	if (!handle_arch_irq)
>>   		panic("No interrupt controller found.");
>>   }
>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>> index 4b959e6..85cbf43 100644
>> --- a/drivers/irqchip/irq-gic.c
>> +++ b/drivers/irqchip/irq-gic.c
>> @@ -33,12 +33,14 @@
>>   #include <linux/of.h>
>>   #include <linux/of_address.h>
>>   #include <linux/of_irq.h>
>> +#include <linux/acpi.h>
>>   #include <linux/irqdomain.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/percpu.h>
>>   #include <linux/slab.h>
>>   #include <linux/irqchip/chained_irq.h>
>>   #include <linux/irqchip/arm-gic.h>
>> +#include <linux/irqchip/arm-gic-acpi.h>
>>
>>   #include <asm/cputype.h>
>>   #include <asm/irq.h>
>> @@ -1029,3 +1031,115 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
>>   IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
>>
>>   #endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static u64 dist_phy_base, cpu_phy_base = ULONG_MAX;
>
> Please use phys_addr_t for physical addresses. The use of ULONG_MAX
> looks dodgy. Please have a proper symbol to flag the fact that it hasn't
> been assigned yet.
Sure, will do.

>
>> +
>> +static int __init
>> +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
>> +			const unsigned long end)
>> +{
>> +	struct acpi_madt_generic_interrupt *processor;
>> +	u64 gic_cpu_base;
>
> phys_addr_t
>
>> +	processor = (struct acpi_madt_generic_interrupt *)header;
>> +
>> +	if (BAD_MADT_ENTRY(processor, end))
>> +		return -EINVAL;
>> +
>> +	gic_cpu_base = processor->base_address;
>> +	if (!gic_cpu_base)
>> +		return -EFAULT;
>
> Is zero an invalid address?
Yeah, good point.
>
>> +
>> +	/*
>> +	 * There is no support for non-banked GICv1/2 register in ACPI spec.
>> +	 * All CPU interface addresses have to be the same.
>> +	 */
>> +	if (cpu_phy_base != ULONG_MAX && gic_cpu_base != cpu_phy_base)
>> +		return -EFAULT;
>> +
>> +	cpu_phy_base = gic_cpu_base;
>> +	return 0;
>> +}
>> +
>> +static int __init
>> +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
>> +				const unsigned long end)
>> +{
>> +	struct acpi_madt_generic_distributor *dist;
>> +
>> +	dist = (struct acpi_madt_generic_distributor *)header;
>> +
>> +	if (BAD_MADT_ENTRY(dist, end))
>> +		return -EINVAL;
>> +
>> +	dist_phy_base = dist->base_address;
>> +	if (!dist_phy_base)
>> +		return -EFAULT;
>
> Same question about zero.
>
>> +
>> +	return 0;
>> +}
>> +
>> +int __init
>> +gic_v2_acpi_init(struct acpi_table_header *table)
>> +{
>> +	void __iomem *cpu_base, *dist_base;
>> +	int count;
>> +
>> +	/* Collect CPU base addresses */
>> +	count = acpi_parse_entries(sizeof(struct acpi_table_madt),
>> +				   gic_acpi_parse_madt_cpu, table,
>> +				   ACPI_MADT_TYPE_GENERIC_INTERRUPT,
>> +				   ACPI_MAX_GIC_CPU_INTERFACE_ENTRIES);
>> +	if (count < 0) {
>> +		pr_err("Error during GICC entries parsing\n");
>> +		return -EFAULT;
>> +	} else if (!count) {
>> +		/* No GICC entries provided, use address from MADT header */
>> +		struct acpi_table_madt *madt = (struct acpi_table_madt *)table;
>> +
>> +		if (!madt->address)
>> +			return -EFAULT;
>> +
>> +		cpu_phy_base = (u64)madt->address;
>> +	}
>> +
>> +	/*
>> +	 * Find distributor base address. We expect one distributor entry since
>> +	 * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
>> +	 */
>> +	count = acpi_parse_entries(sizeof(struct acpi_table_madt),
>> +				   gic_acpi_parse_madt_distributor, table,
>> +				   ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
>> +				   ACPI_MAX_GIC_DISTRIBUTOR_ENTRIES);
>> +	if (count <= 0) {
>> +		pr_err("Error during GICD entries parsing\n");
>> +		return -EFAULT;
>> +	} else if (count > 1) {
>> +		pr_err("More than one GICD entry detected\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
>> +	if (!cpu_base) {
>> +		pr_err("Unable to map GICC registers\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	dist_base = ioremap(dist_phy_base, ACPI_GIC_DIST_MEM_SIZE);
>> +	if (!dist_base) {
>> +		pr_err("Unable to map GICD registers\n");
>> +		iounmap(cpu_base);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	/*
>> +	 * Initialize zero GIC instance (no multi-GIC support). Also, set GIC
>> +	 * as default IRQ domain to allow for GSI registration and GSI to IRQ
>> +	 * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
>> +	 */
>> +	gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
>> +	irq_set_default_host(gic_data[0].domain);
>> +	return 0;
>> +}
>> +#endif
>> diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h
>> new file mode 100644
>> index 0000000..ce2ae1a8
>> --- /dev/null
>> +++ b/include/linux/irqchip/arm-gic-acpi.h
>> @@ -0,0 +1,33 @@
>> +/*
>> + * Copyright (C) 2014, Linaro Ltd.
>> + *	Author: Tomasz Nowicki <tomasz.nowicki@...aro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef ARM_GIC_ACPI_H_
>> +#define ARM_GIC_ACPI_H_
>> +
>> +#include <linux/acpi.h>
>
> Do we need linux/acpi.h here? You could have a separate forward
> declaration of struct acpi_table_header, specially in the light of my
> last remark below.
Indeed, we can do forward declaration instead of #include 
<linux/acpi.h>. Thanks!

>
>> +
>> +#ifdef CONFIG_ACPI
>> +#define ACPI_MAX_GIC_CPU_INTERFACE_ENTRIES	65535
>
> With GICv2? I doubt it.
I will create macro for each GIC driver:
#define ACPI_MAX_GICV2_CPU_INTERFACE_ENTRIES	8
#define ACPI_MAX_GICV3_CPU_INTERFACE_ENTRIES	65535

>
>> +#define ACPI_MAX_GIC_DISTRIBUTOR_ENTRIES	1
>> +
>> +/*
>> + * Hard code here, we can not get memory size from MADT (but FDT does),
>> + * Actually no need to do that, because this size can be inferred
>> + * from GIC spec.
>> + */
>> +#define ACPI_GIC_DIST_MEM_SIZE		(SZ_64K)
>
> I don't know which version of the spec you're looking at, but my version
> of the GICv2 spec has a 4kB distributor. Also, it would be good to make
> obvious which GIC version this define is about.
OK

>
>> +#define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
>> +
>> +void acpi_gic_init(void);
>> +int gic_v2_acpi_init(struct acpi_table_header *table);
>> +#else
>> +static inline void acpi_gic_init(void) { }
>> +#endif
>> +
>> +#endif /* ARM_GIC_ACPI_H_ */
>>
>
> In the end, why do we need a separate file for this? I cannot see
> anything that prevents it from being merged with arm-gic.h.
>
> Thanks,
>
> 	M.
>
Having only GICv2, it would work. Considering we would do the same for 
GICv3 (arm-gic-v3.h) there will be register name conflicts for both 
headers inclusion:

[...]
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/arm-gic-v3.h>
[...]
	err = gic_v3_acpi_init(table);
	if (err)
		err = gic_v2_acpi_init(table);
	if (err)
		pr_err("Failed to initialize GIC IRQ controller");
[...]
So instead of changing register names prefix, I choose new header will 
be less painfully.

Regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists