Message-Id: <1409662853-29313-10-git-send-email-daniel.thompson@linaro.org>
Date:	Tue,  2 Sep 2014 14:00:43 +0100
From:	Daniel Thompson <daniel.thompson@...aro.org>
To:	Russell King <linux@....linux.org.uk>
Cc:	Daniel Thompson <daniel.thompson@...aro.org>,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	kgdb-bugreport@...ts.sourceforge.net, patches@...aro.org,
	linaro-kernel@...ts.linaro.org,
	John Stultz <john.stultz@...aro.org>,
	Anton Vorontsov <anton.vorontsov@...aro.org>,
	Colin Cross <ccross@...roid.com>, kernel-team@...roid.com,
	Rob Herring <robherring2@...il.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Ben Dooks <ben.dooks@...ethink.co.uk>,
	Catalin Marinas <catalin.marinas@....com>,
	Dave Martin <Dave.Martin@....com>,
	Fabio Estevam <festevam@...il.com>,
	Frederic Weisbecker <fweisbec@...il.com>,
	Nicolas Pitre <nico@...aro.org>
Subject: [PATCH v11 09/19] irqchip: gic: Add support for IPI FIQ

To support IPI FIQ we alter gic_cpu_init() to honour SMP_IPI_FIQ_MASK and
register a fairly high priority notifier to acknowledge and clear the IPI
when it is triggered.

For the IPI FIQ to be useful we must also make it safe to call
gic_raise_softirq() from the FIQ handler by altering the locking
strategy slightly.

Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
---
 arch/arm/kernel/fiq.c     |   3 ++
 drivers/irqchip/irq-gic.c | 125 ++++++++++++++++++++++++++++++++++++++--------
 2 files changed, 107 insertions(+), 21 deletions(-)

diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index c6b3bed..115d319 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -232,6 +232,9 @@ asmlinkage void __exception_irq_entry fiq_nmi_handler(struct pt_regs *regs)
 #ifdef CONFIG_KGDB_FIQ
 	kgdb_handle_fiq(regs);
 #endif
+#ifdef CONFIG_ARM_GIC
+	gic_handle_fiq_ipi();
+#endif
 
 	nmi_exit();
 	set_irq_regs(old_regs);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index d928912..8834749 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/ratelimit.h>
 
 #include <asm/cputype.h>
 #ifdef CONFIG_FIQ
@@ -51,6 +52,10 @@
 #include "irq-gic-common.h"
 #include "irqchip.h"
 
+#ifndef SMP_IPI_FIQ_MASK
+#define SMP_IPI_FIQ_MASK 0
+#endif
+
 union gic_base {
 	void __iomem *common_base;
 	void __percpu * __iomem *percpu_base;
@@ -77,6 +82,8 @@ struct gic_chip_data {
 };
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+/* A fiq-safe spinlock must only be locked when the FIQ is masked */
+static DEFINE_RAW_SPINLOCK(fiq_safe_migration_lock);
 
 /*
  * The GIC mapping of CPU interfaces does not necessarily match
@@ -346,20 +353,21 @@ static struct irq_chip gic_chip = {
  * match what "ARM strongly recommends" for a system where no Group 1
  * interrupt must ever preempt a Group 0 interrupt.
  */
-static void gic_set_group_irq(struct irq_data *d, int group)
+static void gic_set_group_irq(void __iomem *base, unsigned int hwirq,
+				int group)
 {
-	unsigned int grp_reg = gic_irq(d) / 32 * 4;
-	u32 grp_mask = 1 << (gic_irq(d) % 32);
+	unsigned int grp_reg = hwirq / 32 * 4;
+	u32 grp_mask = 1 << (hwirq % 32);
 	u32 grp_val;
 
-	unsigned int pri_reg = (gic_irq(d) / 4) * 4;
-	u32 pri_mask = 1 << (7 + ((gic_irq(d) % 4) * 8));
+	unsigned int pri_reg = (hwirq / 4) * 4;
+	u32 pri_mask = 1 << (7 + ((hwirq % 4) * 8));
 	u32 pri_val;
 
 	raw_spin_lock(&irq_controller_lock);
 
-	grp_val = readl_relaxed(gic_dist_base(d) + GIC_DIST_IGROUP + grp_reg);
-	pri_val = readl_relaxed(gic_dist_base(d) + GIC_DIST_PRI + pri_reg);
+	grp_val = readl_relaxed(base + GIC_DIST_IGROUP + grp_reg);
+	pri_val = readl_relaxed(base + GIC_DIST_PRI + pri_reg);
 
 	if (group) {
 		grp_val |= grp_mask;
@@ -369,20 +377,20 @@ static void gic_set_group_irq(struct irq_data *d, int group)
 		pri_val &= ~pri_mask;
 	}
 
-	writel_relaxed(grp_val, gic_dist_base(d) + GIC_DIST_IGROUP + grp_reg);
-	writel_relaxed(pri_val, gic_dist_base(d) + GIC_DIST_PRI + pri_reg);
+	writel_relaxed(grp_val, base + GIC_DIST_IGROUP + grp_reg);
+	writel_relaxed(pri_val, base + GIC_DIST_PRI + pri_reg);
 
 	raw_spin_unlock(&irq_controller_lock);
 }
 
 static void gic_enable_fiq(struct irq_data *d)
 {
-	gic_set_group_irq(d, 0);
+	gic_set_group_irq(gic_dist_base(d), gic_irq(d), 0);
 }
 
 static void gic_disable_fiq(struct irq_data *d)
 {
-	gic_set_group_irq(d, 1);
+	gic_set_group_irq(gic_dist_base(d), gic_irq(d), 1);
 }
 
 static int gic_ack_fiq(struct irq_data *d)
@@ -390,8 +398,22 @@ static int gic_ack_fiq(struct irq_data *d)
 	struct gic_chip_data *gic = irq_data_get_irq_chip_data(d);
 	u32 irqstat, irqnr;
 
-	irqstat = readl_relaxed(gic_data_cpu_base(gic) + GIC_CPU_INTACK);
-	irqnr = irqstat & GICC_IAR_INT_ID_MASK;
+	while (1) {
+		writel_relaxed(0x70, gic_data_cpu_base(gic) + GIC_CPU_PRIMASK);
+		irqstat =
+		    readl_relaxed(gic_data_cpu_base(gic) + GIC_CPU_INTACK);
+		writel_relaxed(0xf0, gic_data_cpu_base(gic) + GIC_CPU_PRIMASK);
+
+		irqnr = irqstat & GICC_IAR_INT_ID_MASK;
+		if (irqnr > 15)
+			break;
+
+		/* we've got an IPI which we can simply acknowledge
+		 * and move on
+		 */
+		gic_eoi_irq(d);
+	}
+
 	return irq_find_mapping(gic->domain, irqnr);
 }
 
@@ -430,7 +452,43 @@ static void __init gic_init_fiq(struct gic_chip_data *gic,
 	for (i = 0; i < num_irqs; i++)
 		fiq_register_mapping(first_irq + i, &gic_fiq);
 }
+
+/*
+ * Fully acknowledge (both ack and eoi) a FIQ-based IPI
+ */
+static int gic_handle_fiq_ipi(struct notifier_block *nb, unsigned long regs,
+			   void *data)
+{
+	struct gic_chip_data *gic = &gic_data[0];
+	void __iomem *cpu_base = gic_data_cpu_base(gic);
+	unsigned long irqstat, irqnr;
+
+	if (WARN_ON(!in_nmi()))
+		return NOTIFY_BAD;
+
+	while ((1u << readl_relaxed(cpu_base + GIC_CPU_HIGHPRI)) &
+	       SMP_IPI_FIQ_MASK) {
+		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+		writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+
+		irqnr = irqstat & GICC_IAR_INT_ID_MASK;
+		WARN_RATELIMIT(irqnr > 16,
+			       "Unexpected irqnr %lu (bad prioritization?)\n",
+			       irqnr);
+	}
+
+	return NOTIFY_OK;
+}
+
+/*
+ * Notifier to ensure IPI FIQ is acknowledged correctly.
+ */
+static struct notifier_block gic_fiq_ipi_notifier = {
+	.notifier_call = gic_handle_fiq_ipi,
+};
 #else /* CONFIG_FIQ */
+static inline void gic_set_group_irq(void __iomem *base, unsigned int hwirq,
+				     int group) {}
 static inline void gic_init_fiq(struct gic_chip_data *gic,
 				irq_hw_number_t first_irq,
 				unsigned int num_irqs) {}
@@ -527,14 +585,19 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 	gic_cpu_config(dist_base, NULL);
 
 	/*
-	 * Set all PPI and SGI interrupts to be group 1.
-	 *
-	 * If grouping is not available (not implemented or prohibited by
-	 * security mode) these registers are read-as-zero/write-ignored.
+	 * Optionally set all PPI and SGI interrupts to be group 1.
 	 */
 	if (gic_data_fiq_enable(gic))
 		writel_relaxed(0xffffffff, dist_base + GIC_DIST_IGROUP + 0);
 
+	/*
+	 * Optionally shift the FIQ based IPIs to group 0.
+	 */
+	if (gic_data_fiq_enable(gic))
+		for (i = 0; i < 16; i++)
+			if (SMP_IPI_FIQ_MASK & (1 << i))
+				gic_set_group_irq(dist_base, i, 0);
+
 	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
 	if (gic_data_fiq_enable(gic))
 		writel_relaxed(0x1f, base + GIC_CPU_CTRL);
@@ -747,7 +810,17 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	unsigned long flags, map = 0;
 	unsigned long softint;
 
-	raw_spin_lock_irqsave(&irq_controller_lock, flags);
+	/*
+	 * The locking in this function ensures we don't use stale cpu mappings
+	 * and thus we never route an IPI to the wrong physical core during a
+	 * big.LITTLE switch. The switch code takes both of these locks meaning
+	 * we can choose whichever lock is safe to use from our current calling
+	 * context.
+	 */
+	if (in_nmi())
+		raw_spin_lock(&fiq_safe_migration_lock);
+	else
+		raw_spin_lock_irqsave(&irq_controller_lock, flags);
 
 	/* Convert our logical CPU mask into a physical one. */
 	for_each_cpu(cpu, mask)
@@ -761,12 +834,16 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 
 	/* this always happens on GIC0 */
 	softint = map << 16 | irq;
-	if (gic_data_fiq_enable(&gic_data[0]))
+	if (gic_data_fiq_enable(&gic_data[0]) &&
+	    !(SMP_IPI_FIQ_MASK & (1 << irq)))
 		softint |= 0x8000;
 	writel_relaxed(softint,
 		       gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 
-	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
+	if (in_nmi())
+		raw_spin_unlock(&fiq_safe_migration_lock);
+	else
+		raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
 #endif
 
@@ -814,7 +891,7 @@ int gic_get_cpu_id(unsigned int cpu)
  * Migrate all peripheral interrupts with a target matching the current CPU
  * to the interface corresponding to @new_cpu_id.  The CPU interface mapping
  * is also updated.  Targets to other CPU interfaces are unchanged.
- * This must be called with IRQs locally disabled.
+ * This must be called with IRQ and FIQ locally disabled.
  */
 void gic_migrate_target(unsigned int new_cpu_id)
 {
@@ -836,6 +913,7 @@ void gic_migrate_target(unsigned int new_cpu_id)
 	ror_val = (cur_cpu_id - new_cpu_id) & 31;
 
 	raw_spin_lock(&irq_controller_lock);
+	raw_spin_lock(&fiq_safe_migration_lock);
 
 	/* Update the target interface for this logical CPU */
 	gic_cpu_map[cpu] = 1 << new_cpu_id;
@@ -855,6 +933,7 @@ void gic_migrate_target(unsigned int new_cpu_id)
 		}
 	}
 
+	raw_spin_unlock(&fiq_safe_migration_lock);
 	raw_spin_unlock(&irq_controller_lock);
 
 	/*
@@ -1125,6 +1204,10 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 #ifdef CONFIG_SMP
 		set_smp_cross_call(gic_raise_softirq);
 		register_cpu_notifier(&gic_cpu_notifier);
+#ifdef CONFIG_FIQ
+		if (gic_data_fiq_enable(gic))
+			register_fiq_nmi_notifier(&gic_fiq_ipi_notifier);
+#endif
 #endif
 		set_handle_irq(gic_handle_irq);
 	}
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists