| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140903142029.GH28985@lee--X1>
Date: Wed, 3 Sep 2014 15:20:29 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Chris Zhong <zyw@...k-chips.com>
Cc: dianders@...omium.org, heiko@...ech.de, robh+dt@...nel.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
sameo@...ux.intel.com, lgirdwood@...il.com, a.zummo@...ertech.it,
mturquette@...aro.org, akpm@...ux-foundation.org,
broonie@...nel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, rtc-linux@...glegroups.com,
grant.likely@...aro.org, hl@...k-chips.com,
huangtao@...k-chips.com, cf@...k-chips.com,
zhangqing@...k-chips.com, xxx@...k-chips.com, olof@...om.net,
sonnyrao@...omium.org, dtor@...omium.org,
javier.martinez@...labora.co.uk, kever.yang@...k-chips.com
Subject: Re: [PATCH v8 1/5] dt-bindings: Add RK808 device tree bindings
document
On Wed, 03 Sep 2014, Chris Zhong wrote:
> Add device tree bindings documentation and a header file
> for rockchip's RK808 pmic.
>
> Signed-off-by: Doug Anderson <dianders@...omium.org>
> Signed-off-by: Chris Zhong <zyw@...k-chips.com>
> Signed-off-by: Zhang Qing <zhangqing@...k-chips.com>
>
> Tested-by: Heiko <heiko@...ech.de>
> ---
>
> Changes in v8:
> Advices by Doug
> - add description about "vccn-supply"
> - modify description about clock-cells
>
> Changes in v7:
> Advices by Mark Rutland
> - modify description about clock-cells
> - update the example
>
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
>
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
>
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
>
> Changes in v3: None
> Changes in v2: None
>
> Documentation/devicetree/bindings/mfd/rk808.txt | 177 +++++++++++++++++++++++
> include/dt-bindings/clock/rockchip,rk808.h | 11 ++
> 2 files changed, 188 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
> create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> new file mode 100644
> index 0000000..9e6e259
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -0,0 +1,177 @@
> +RK808 Power Management Integrated Circuit
> +
> +Required properties:
> +- compatible: "rockchip,rk808"
> +- reg: I2C slave address
> +- interrupt-parent: The parent interrupt controller.
> +- interrupts: the interrupt outputs of the controller.
> +- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
> + outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
> +
> +Optional properties:
> +- clock-output-names: From common clock binding to override the
> + default output clock name
> +- rockchip,system-power-controller: Telling whether or not this pmic is controlling
> + the system power.
> +- vcc1-supply: The input supply for DCDC_REG1
> +- vcc2-supply: The input supply for DCDC_REG2
> +- vcc3-supply: The input supply for DCDC_REG3
> +- vcc4-supply: The input supply for DCDC_REG4
> +- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
> +- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7
> +- vcc8-supply: The input supply for SWITCH_REG1
> +- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5
> +- vcc10-supply: The input supply for LDO_REG6
> +- vcc11-supply: The input supply for LDO_REG8
> +- vcc12-supply: The input supply for SWITCH_REG2
> +
> +Regulators: All the regulators of RK808 to be instantiated shall be
> +listed in a child node named 'regulators'. Each regulator is represented
> +by a child node of the 'regulators' node.
> +
> + regulator-name {
> + /* standard regulator bindings here */
> + };
> +
> +Following regulators of the RK808 PMIC block are supported. Note that
> +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
> +number as described in RK808 datasheet.
> +
> + - DCDC_REGn
> + - valid values for n are 1 to 4.
> + - LDO_REGn
> + - valid values for n are 1 to 8.
> + - SWITCH_REGn
> + - valid values for n are 1 to 2
> +
> +Standard regulator bindings are used inside regulator subnodes. Check
> + Documentation/devicetree/bindings/regulator/regulator.txt
> +for more details
> +
> +Example:
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + clock-output-names = "xin32k", "rk808-clkout2";
> + interrupt-parent = <&gpio0>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>;
> + reg = <0x1b>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> +
> + vcc8-supply = <&vcc_18>;
> + vcc9-supply = <&vcc_io>;
> + vcc10-supply = <&vcc_io>;
> + vcc12-supply = <&vcc_io>;
> + vddio-supply = <&vccio_pmu>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-name = "vdd_arm";
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + };
> +
> + vccio_pmu: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_pmu";
> + };
> +
> + vcc_tp: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_tp";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + };
> +
> + vcc18_lcd: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + };
> +
> + vcca_codec: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcca_codec";
> + };
> +
> + vcc_wl: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_wl";
> + };
> +
> + vcc_lcd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_lcd";
> + };
> + };
> + };
> diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
> new file mode 100644
> index 0000000..1a87343
> --- /dev/null
> +++ b/include/dt-bindings/clock/rockchip,rk808.h
> @@ -0,0 +1,11 @@
> +/*
> + * This header provides constants clk index RK808 pmic clkout
> + */
> +#ifndef _CLK_ROCKCHIP_RK808
> +#define _CLK_ROCKCHIP_RK808
> +
> +/* CLOCKOUT index */
> +#define RK808_CLKOUT0 0
> +#define RK808_CLKOUT1 1
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists