| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1409938218-9026-17-git-send-email-abrestic@chromium.org>
Date: Fri, 5 Sep 2014 10:30:18 -0700
From: Andrew Bresticker <abrestic@...omium.org>
To: Ralf Baechle <ralf@...ux-mips.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>
Cc: Andrew Bresticker <abrestic@...omium.org>,
Jeffrey Deans <jeffrey.deans@...tec.com>,
Markos Chandras <markos.chandras@...tec.com>,
Paul Burton <paul.burton@...tec.com>,
Arnd Bergmann <arnd@...db.de>,
John Crispin <blogic@...nwrt.org>,
David Daney <ddaney.cavm@...il.com>, linux-mips@...ux-mips.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 16/16] MIPS: Malta: Map GIC local interrupts
Now that the GIC driver properly supports local interrupts, extend
the static interrupt mapping to include the GIC timer and watchdog
and fix up the GIC interrupt setup and handling so that the local
interrupts are properly handled. Note that ipi_map is also renamed
to gic_irq_map since it is now also used to track mapping of non-IPI
interrupts to CPUs.
Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
---
No changes from v1.
---
arch/mips/mti-malta/malta-int.c | 44 +++++++++++++++++++++++++++++++----------
1 file changed, 34 insertions(+), 10 deletions(-)
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index e4f43ba..16b1473 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -38,7 +38,7 @@
#include <asm/rtlx.h>
static unsigned long _msc01_biu_base;
-static unsigned int ipi_map[NR_CPUS];
+static unsigned int gic_irq_map[NR_CPUS];
static DEFINE_RAW_SPINLOCK(mips_irq_lock);
@@ -129,8 +129,8 @@ static void malta_hw0_irqdispatch(void)
static void malta_ipi_irqdispatch(void)
{
-#ifdef CONFIG_MIPS_GIC_IPI
unsigned long irq;
+#ifdef CONFIG_MIPS_GIC_IPI
DECLARE_BITMAP(pending, GIC_NUM_INTRS);
gic_get_int_mask(pending, ipi_ints);
@@ -143,8 +143,12 @@ static void malta_ipi_irqdispatch(void)
irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1);
}
#endif
- if (gic_compare_int())
- do_IRQ(MIPS_GIC_IRQ_BASE);
+ irq = gic_get_local_int();
+ while (irq < GIC_NUM_LOCAL_INTRS) {
+ do_IRQ(MIPS_GIC_LOCAL_IRQ_BASE + irq);
+
+ irq = gic_get_local_int();
+ }
}
static void corehi_irqdispatch(void)
@@ -288,7 +292,7 @@ asmlinkage void plat_irq_dispatch(void)
if (irq == MIPSCPU_INT_I8259A)
malta_hw0_irqdispatch();
- else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
+ else if (gic_present && ((1 << irq) & gic_irq_map[smp_processor_id()]))
malta_ipi_irqdispatch();
else
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
@@ -408,7 +412,7 @@ static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
#define X GIC_UNUSED
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS + GIC_NUM_LOCAL_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
@@ -425,7 +429,10 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ X, X, X, X, 0 },
- /* The remainder of this table is initialised by fill_ipi_map */
+ /*
+ * The remainder of this table is initialised by fill_ipi_map and
+ * fill_local_irq_map
+ */
};
#undef X
@@ -438,7 +445,7 @@ static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
gic_intr_map[intr].polarity = GIC_POL_POS;
gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
gic_intr_map[intr].flags = 0;
- ipi_map[cpu] |= (1 << (cpupin + 2));
+ gic_irq_map[cpu] |= (1 << (cpupin + 2));
bitmap_set(ipi_ints, intr, 1);
}
@@ -453,6 +460,22 @@ static void __init fill_ipi_map(void)
}
#endif
+static void __init fill_local_irq_map(void)
+{
+ int i;
+
+ for (i = 0; i < GIC_NUM_LOCAL_INTRS; i++) {
+ int intr = i + GIC_NUM_INTRS;
+
+ gic_intr_map[intr].cpunum = 0;
+ gic_intr_map[intr].pin = GIC_CPU_INT2;
+ gic_intr_map[intr].flags = 0;
+ }
+
+ for (i = 0; i < NR_CPUS; i++)
+ gic_irq_map[i] |= 1 << (GIC_CPU_INT2 + 2);
+}
+
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
setup_irq(irq, action);
@@ -533,6 +556,7 @@ void __init arch_init_irq(void)
gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
fill_ipi_map();
#endif
+ fill_local_irq_map();
gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!mips_cm_present()) {
@@ -542,8 +566,7 @@ void __init arch_init_irq(void)
(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
pr_debug("GIC Enabled\n");
}
-#if defined(CONFIG_MIPS_GIC_IPI)
- /* set up ipi interrupts */
+ /* set up ipi and local interrupts */
if (cpu_has_vint) {
set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
@@ -557,6 +580,7 @@ void __init arch_init_irq(void)
write_c0_status(0x1100dc00);
pr_info("CPU%d: status register frc %08x\n",
smp_processor_id(), read_c0_status());
+#if defined(CONFIG_MIPS_GIC_IPI)
for (i = 0; i < nr_cpu_ids; i++) {
arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
GIC_RESCHED_INT(i), &irq_resched);
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists