lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1409938218-9026-8-git-send-email-abrestic@chromium.org>
Date:	Fri,  5 Sep 2014 10:30:09 -0700
From:	Andrew Bresticker <abrestic@...omium.org>
To:	Ralf Baechle <ralf@...ux-mips.org>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Jason Cooper <jason@...edaemon.net>
Cc:	Andrew Bresticker <abrestic@...omium.org>,
	Jeffrey Deans <jeffrey.deans@...tec.com>,
	Markos Chandras <markos.chandras@...tec.com>,
	Paul Burton <paul.burton@...tec.com>,
	Arnd Bergmann <arnd@...db.de>,
	John Crispin <blogic@...nwrt.org>,
	David Daney <ddaney.cavm@...il.com>, linux-mips@...ux-mips.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 07/16] irqchip: mips-gic: Implement irq_set_type callback

Implement an irq_set_type callback for the GIC which is used to set
the polarity and trigger type of GIC interrupts.

Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
---
Changes from v1:
 - fixed polarity setting for edge-triggered interrupts
---
 arch/mips/include/asm/gic.h    |  9 +++++++
 drivers/irqchip/irq-mips-gic.c | 53 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index d7699cf..3beb4eb 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -23,6 +23,8 @@
 #define GIC_POL_NEG			0
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
+#define GIC_TRIG_DUAL_ENABLE		1
+#define GIC_TRIG_DUAL_DISABLE		0
 
 #define MSK(n) ((1 << (n)) - 1)
 #define REG32(addr)		(*(volatile unsigned int *) (addr))
@@ -179,6 +181,13 @@
 		GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
 		(trig) << GIC_INTR_BIT(intr))
 
+/* Dual edge triggering : Reset Value is always 0 */
+#define GIC_SH_SET_DUAL_OFS		0x0200
+#define GIC_SET_DUAL(intr, dual) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_DUAL_OFS + \
+		GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
+		(dual) << GIC_INTR_BIT(intr))
+
 /* Mask manipulation */
 #define GIC_SH_SMASK_OFS		0x0380
 #define GIC_SET_INTR_MASK(intr) \
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 9e9d8b9..f29bb4e 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -44,6 +44,8 @@ static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
 static struct gic_pending_regs pending_regs[NR_CPUS];
 static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
 
+static struct irq_chip gic_irq_controller;
+
 #if defined(CONFIG_CSRC_GIC) || defined(CONFIG_CEVT_GIC)
 cycle_t gic_read_count(void)
 {
@@ -237,6 +239,56 @@ static void gic_unmask_irq(struct irq_data *d)
 	GIC_SET_INTR_MASK(d->irq - gic_irq_base);
 }
 
+static int gic_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int irq = d->irq - gic_irq_base;
+	bool is_edge;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_FALLING:
+		GIC_SET_POLARITY(irq, GIC_POL_NEG);
+		GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+		GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+		is_edge = true;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		GIC_SET_POLARITY(irq, GIC_POL_POS);
+		GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+		GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+		is_edge = true;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		/* polarity is irrelevant in this case */
+		GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+		GIC_SET_DUAL(irq, GIC_TRIG_DUAL_ENABLE);
+		is_edge = true;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		GIC_SET_POLARITY(irq, GIC_POL_NEG);
+		GIC_SET_TRIGGER(irq, GIC_TRIG_LEVEL);
+		GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+		is_edge = false;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+	default:
+		GIC_SET_POLARITY(irq, GIC_POL_POS);
+		GIC_SET_TRIGGER(irq, GIC_TRIG_LEVEL);
+		GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+		is_edge = false;
+		break;
+	}
+
+	if (is_edge) {
+		gic_irq_flags[irq] |= GIC_TRIG_EDGE;
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
+	} else {
+		gic_irq_flags[irq] &= ~GIC_TRIG_EDGE;
+		__irq_set_handler_locked(d->irq, handle_level_irq);
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static DEFINE_SPINLOCK(gic_lock);
 
@@ -277,6 +329,7 @@ static struct irq_chip gic_irq_controller = {
 	.irq_mask_ack		=	gic_mask_irq,
 	.irq_unmask		=	gic_unmask_irq,
 	.irq_eoi		=	gic_finish_irq,
+	.irq_set_type		=	gic_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	=	gic_set_affinity,
 #endif
-- 
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ