[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1410273848-24663-5-git-send-email-antoine.tenart@free-electrons.com>
Date: Tue, 9 Sep 2014 16:44:04 +0200
From: Antoine Tenart <antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>,
alexandre.belloni@...e-electrons.com,
thomas.petazzoni@...e-electrons.com, zmxu@...vell.com,
jszhang@...vell.com, netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/8] net: pxa168_eth: fix Ethernet flow control status
IEEE 802.3x Ethernet flow control is disabled when bit (1 << 2) is set
in the port status register. Fix the flow control detection in the link
event handling function which was relying on the opposite assumption.
Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
---
drivers/net/ethernet/marvell/pxa168_eth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 953112f87c5f..10422f2df6cc 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -163,7 +163,7 @@
/* Bit definitions for Port status */
#define PORT_SPEED_100 (1 << 0)
#define FULL_DUPLEX (1 << 1)
-#define FLOW_CONTROL_ENABLED (1 << 2)
+#define FLOW_CONTROL_DISABLED (1 << 2)
#define LINK_UP (1 << 3)
/* Bit definitions for work to be done */
@@ -885,7 +885,7 @@ static void handle_link_event(struct pxa168_eth_private *pep)
speed = 10;
duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
- fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0;
+ fc = (port_status & FLOW_CONTROL_DISABLED) ? 0 : 1;
netdev_info(dev, "link up, %d Mb/s, %s duplex, flow control %sabled\n",
speed, duplex ? "full" : "half", fc ? "en" : "dis");
if (!netif_carrier_ok(dev))
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists