linux-kernel - Re: Ask help about pre_init_apic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1410426536.7023.19.camel@linux.intel.com>
Date:	Thu, 11 Sep 2014 12:08:56 +0300
From:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:	Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc:	Jiang Liu <jiang.liu@...ux.intel.com>,
	Thomas Gleixner <tglx@...utronix.de>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	David Cohen <david.a.cohen@...ux.intel.com>
Subject: Re: Ask help about pre_init_apic_IRQ0()

On Thu, 2014-09-11 at 11:53 +0300, Mika Westerberg wrote:
> On Thu, Sep 11, 2014 at 04:44:54PM +0800, Jiang Liu wrote:
> > Hi Thomas,
> > 
> > When converting IOAPIC to hierarchy irqdomain, I ran into trouble when
> > dealing with pre_init_apic_IRQ0(). Currently pre_init_apic_IRQ0() is
> > only used by intel-mid platform and is called before initializing of
> > IOAPIC irqdomains. That really causes headache when converting to
> > hierarchy irqdomain. So could we delay
> > 	io_apic_setup_irq_pin(0, 0, &attr);
> >         irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
> >                                       "edge");
> > to the point of "check_timer()"?
> > 
> > I have no MID hardware at handle so can't experiment with it. Could
> > you please refer someone for help?
> 
> Andy (Cc'd) has some MID boards that he uses almost daily basis. Andy
> can you help Jiang here?

I'm not familiar with IRQ domains like people Cc'ed here, but I could
test any patch you provide to me. Just keep me in Cc list of those
patches you would like to be tested on Intel MID, though I have only
Intel Medfield based board. For newer stuff would be better to ask David
(Cc'ed).

> 
> > 
> > /* Enable IOAPIC early just for system timer */
> > void __init pre_init_apic_IRQ0(void)
> > {
> >         struct io_apic_irq_attr attr = { 0, 0, 0, 0 };
> > 
> >         printk(KERN_INFO "Early APIC setup for system timer0\n");
> > #ifndef CONFIG_SMP
> >         physid_set_mask_of_physid(boot_cpu_physical_apicid,
> >                                          &phys_cpu_present_map);
> > #endif
> >         setup_local_APIC();
> > 
> >         io_apic_setup_irq_pin(0, 0, &attr);
> >         irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
> >                                       "edge");
> > }
> > 
> > Regards!
> > Gerry


-- 
Andy Shevchenko <andriy.shevchenko@...el.com>
Intel Finland Oy

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/