linux-kernel - RE: [PATCH v3 0/7] Add max77802 support for Peach boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 12 Sep 2014 21:26:13 +0900
From:	kgene@...nel.org
To:	'Javier Martinez Canillas' <javier.martinez@...labora.co.uk>
Cc:	'Doug Anderson' <dianders@...omium.org>,
	'Olof Johansson' <olof@...om.net>,
	'Mark Brown' <broonie@...nel.org>,
	'Naveen Krishna Chatradhi' <ch.naveen@...sung.com>,
	'Rahul Sharma' <rahul.sharma@...sung.com>,
	'Andreas Faerber' <afaerber@...e.de>,
	linux-samsung-soc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	'Vivek Gautam' <gautam.vivek@...sung.com>
Subject: RE: [PATCH v3 0/7] Add max77802 support for Peach boards

Javier Martinez Canillas wrote:
> 
> Hello Kukjin,
> 
Hi Javier,

> This is a third version of th series that adds max77802 support for
> the Peach Pit and Pi boards. The series also have all the pending
> patches that were posted but depended on this support. I've picked
> all the patches I found and rebased them to be sure that they apply
> cleanly on top of linux-next. Also I've taken some DT snippets from
> the downstream Chrome OS 3.8 kernel DTS for devices that use one of
> these regulators as their input supply.
> 
Thanks a lot and looks good to me. I'll take this whole series.

- Kukjin

> Changes since v2 [0]:
>  - Remove left over supply on ldo35 regulator, suggested by Doug Anderson.
>  - Add a patch to change the i2c7 clock at 400kHz, suggested by Doug Anderson.
>  - Add a patch from Vivek Gautam to enable max77802 regulator driver support.
> 
> Changes sinve v1 [1]:
>  - Dropped patch that added vmmc and vqmmc supplies as suggested
>    by Doug Anderson.
>  - Use IRQ flags define instead of a magic number as suggested by
>    Andreas Faerber.
> 
> The series is composed of the following patches:
> 
> Javier Martinez Canillas (3):
>   ARM: dts: Add Peach Pit and Pi dts entry for max77802 PMIC
>   ARM: dts: Add Peach Pit and Pi dts entry for ISL29018 sensor
>   ARM: dts: Set i2c7 clock at 400kHz for Peach boards
> 
> Naveen Krishna Chatradhi (1):
>   ARM: dts: Add thermistor dts fragment used by exynos based Peach
>     boards
> 
> Rahul Sharma (2):
>   ARM: dts: add hdmi regulators for exynos5800 based peach-pi board
>   ARM: dts: add hdmi regulators for exynos5420 based peach-pit board
> 
> Vivek Gautam (1):
>   ARM: exynos_defconfig: Enable MAX77802
> 
>  arch/arm/boot/dts/cros-adc-thermistors.dtsi |  44 ++++
>  arch/arm/boot/dts/exynos5420-peach-pit.dts  | 389 ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/exynos5800-peach-pi.dts   | 389 ++++++++++++++++++++++++++++
>  arch/arm/configs/exynos_defconfig           |   3 +
>  4 files changed, 825 insertions(+)
>  create mode 100644 arch/arm/boot/dts/cros-adc-thermistors.dtsi
> 
> 
> Best regards,
> Javier
> 
> [0]: https://lkml.org/lkml/2014/8/20/225
> [1]: https://lkml.org/lkml/2014/8/19/372

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/