| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140915153202.0b9c8801@ultegra>
Date: Mon, 15 Sep 2014 15:32:02 -0700
From: Jacob Pan <jacob.jun.pan@...ux.intel.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: IIO <linux-iio@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
DEVICE TREE <devicetree@...r.kernel.org>,
Carlo Caione <carlo@...one.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Aaron Lu <aaron.lu@...el.com>, Alan Cox <alan@...ux.intel.com>,
Jean Delvare <khali@...ux-fr.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Grant Likely <grant.likely@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Hartmut Knaack <knaack.h@....de>,
Fugang Duan <B38611@...escale.com>,
Arnd Bergmann <arnd@...db.de>,
Zubair Lutfullah <zubair.lutfullah@...il.com>,
Sebastian Reichel <sre@...ian.org>,
Johannes Thumshirn <johannes.thumshirn@....de>,
Philippe Reynes <tremyfr@...oo.fr>,
Angelo Compagnucci <angelo.compagnucci@...il.com>,
Doug Anderson <dianders@...omium.org>,
Ramakrishna Pallala <ramakrishna.pallala@...el.com>,
Peter Meerwald <pmeerw@...erw.net>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: Re: [PATCH v3 2/5] mfd/axp2xx: extend axp20x to support axp288 pmic
On Mon, 15 Sep 2014 23:22:16 +0100
Lee Jones <lee.jones@...aro.org> wrote:
> On Thu, 11 Sep 2014, Jacob Pan wrote:
>
> > XPower AXP288 is a customized PMIC for Intel Baytrail-CR platforms.
> > Similar to AXP202/209, AXP288 comes with USB charger, more LDO and
> > BUCK channels, and AD converter. It also provides extended status
> > and interrupt reporting capabilities than the devices supported in
> > axp20x.c.
> >
> > In addition to feature extension, this patch also adds ACPI binding
> > for enumeration and hooks for ACPI custom operational region
> > handlers.
> >
> > Common data structures and constants have been renamed from axp20x
> > to axp2xx in order to suit the extended scope of devices.
> >
> > This consolidated driver should support more Xpowers' PMICs in both
> > device tree and ACPI enumerated platforms.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> > ---
> > drivers/mfd/axp2xx.c | 423
> > +++++++++++++++++++++++++++++++++++----------
> > include/linux/mfd/axp2xx.h | 60 ++++++- 2 files changed, 388
> > insertions(+), 95 deletions(-)
>
> I agree with Maxime and Jonathan. Please try again. All renaming in
> one single patch, new device support in another please.
>
If you are not against keeping the filenames, I prefer to keep the
axp20x name (not rename to axp2xx) and avoid all the trouble with
rename. Users can get device support information from the Kconfig
description as Jonathan pointed out. Is that OK?
Thanks,
Jacob
> > diff --git a/drivers/mfd/axp2xx.c b/drivers/mfd/axp2xx.c
> > index 332a8a0..300f895 100644
> > --- a/drivers/mfd/axp2xx.c
> > +++ b/drivers/mfd/axp2xx.c
> > @@ -1,9 +1,9 @@
> > /*
> > - * axp2xx.c - MFD core driver for the X-Powers AXP202 and AXP209
> > + * axp2xx.c - MFD core driver for the X-Powers' Power Management
> > ICs *
> > - * AXP2xx comprises an adaptive USB-Compatible PWM charger, 2 BUCK
> > DC-DC
> > - * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current
> > and temperature
> > - * as well as 4 configurable GPIOs.
> > + * AXP2xx typically comprises an adaptive USB-Compatible PWM
> > charger, BUCK DC-DC
> > + * converters, LDOs, multiple 12-bit ADCs of voltage, current and
> > temperature
> > + * as well as configurable GPIOs.
> > *
> > * Author: Carlo Caione <carlo@...one.org>
> > *
> > @@ -25,9 +25,16 @@
> > #include <linux/mfd/core.h>
> > #include <linux/of_device.h>
> > #include <linux/of_irq.h>
> > +#include <linux/acpi.h>
> >
> > #define AXP20X_OFF 0x80
> >
> > +static const char *axp2xx_model_names[] = {
> > + "AXP202",
> > + "AXP209",
> > + "AXP288",
> > +};
> > +
> > static const struct regmap_range axp20x_writeable_ranges[] = {
> > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> > regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
> > @@ -47,6 +54,25 @@ static const struct regmap_access_table
> > axp20x_volatile_table = { .n_yes_ranges =
> > ARRAY_SIZE(axp20x_volatile_ranges), };
> >
> > +static const struct regmap_range axp288_writeable_ranges[] = {
> > + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
> > + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
> > +};
> > +
> > +static const struct regmap_range axp288_volatile_ranges[] = {
> > + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
> > +};
> > +
> > +static const struct regmap_access_table axp288_writeable_table = {
> > + .yes_ranges = axp288_writeable_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
> > +};
> > +
> > +static const struct regmap_access_table axp288_volatile_table = {
> > + .yes_ranges = axp288_volatile_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
> > +};
> > +
> > static struct resource axp20x_pek_resources[] = {
> > {
> > .name = "PEK_DBR",
> > @@ -61,7 +87,40 @@ static struct resource axp20x_pek_resources[] = {
> > },
> > };
> >
> > -static const struct regmap_config axp20x_regmap_config = {
> > +static struct resource axp288_battery_resources[] = {
> > + {
> > + .start = AXP288_IRQ_QWBTU,
> > + .end = AXP288_IRQ_QWBTU,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_WBTU,
> > + .end = AXP288_IRQ_WBTU,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_QWBTO,
> > + .end = AXP288_IRQ_QWBTO,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_WBTO,
> > + .end = AXP288_IRQ_WBTO,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_WL2,
> > + .end = AXP288_IRQ_WL2,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_WL1,
> > + .end = AXP288_IRQ_WL1,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > +};
> > +
> > +static struct regmap_config axp20x_regmap_config = {
> > .reg_bits = 8,
> > .val_bits = 8,
> > .wr_table = &axp20x_writeable_table,
> > @@ -70,47 +129,96 @@ static const struct regmap_config
> > axp20x_regmap_config = { .cache_type = REGCACHE_RBTREE,
> > };
> >
> > -#define AXP20X_IRQ(_irq, _off, _mask) \
> > - [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask =
> > BIT(_mask) } +static struct regmap_config axp288_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .wr_table = &axp288_writeable_table,
> > + .volatile_table = &axp288_volatile_table,
> > + .max_register = AXP288_FG_TUNE5,
> > + .cache_type = REGCACHE_RBTREE,
> > +};
> > +
> > +#define INIT_REGMAP_IRQ(_variant, _irq, _off,
> > _mask) \
> > + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask =
> > BIT(_mask) }
> > static const struct regmap_irq axp20x_regmap_irqs[] = {
> > - AXP20X_IRQ(ACIN_OVER_V, 0, 7),
> > - AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
> > - AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
> > - AXP20X_IRQ(VBUS_OVER_V, 0, 4),
> > - AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
> > - AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
> > - AXP20X_IRQ(VBUS_V_LOW, 0, 1),
> > - AXP20X_IRQ(BATT_PLUGIN, 1, 7),
> > - AXP20X_IRQ(BATT_REMOVAL, 1, 6),
> > - AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
> > - AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
> > - AXP20X_IRQ(CHARG, 1, 3),
> > - AXP20X_IRQ(CHARG_DONE, 1, 2),
> > - AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
> > - AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
> > - AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
> > - AXP20X_IRQ(CHARG_I_LOW, 2, 6),
> > - AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
> > - AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
> > - AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
> > - AXP20X_IRQ(PEK_SHORT, 2, 1),
> > - AXP20X_IRQ(PEK_LONG, 2, 0),
> > - AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
> > - AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
> > - AXP20X_IRQ(VBUS_VALID, 3, 5),
> > - AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
> > - AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
> > - AXP20X_IRQ(VBUS_SESS_END, 3, 2),
> > - AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
> > - AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
> > - AXP20X_IRQ(TIMER, 4, 7),
> > - AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
> > - AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
> > - AXP20X_IRQ(GPIO3_INPUT, 4, 3),
> > - AXP20X_IRQ(GPIO2_INPUT, 4, 2),
> > - AXP20X_IRQ(GPIO1_INPUT, 4, 1),
> > - AXP20X_IRQ(GPIO0_INPUT, 4, 0),
> > + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
> > + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
> > + INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
> > + INIT_REGMAP_IRQ(AXP20X, CHARG, 1,
> > 3),
> > + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1,
> > 1),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1,
> > 0),
> > + INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2,
> > 7),
> > + INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
> > + INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
> > + INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
> > + INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
> > + INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
> > + INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
> > + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
> > + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3,
> > 4),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3,
> > 2),
> > + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
> > + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
> > + INIT_REGMAP_IRQ(AXP20X, TIMER, 4,
> > 7),
> > + INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
> > + INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
> > + INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
> > + INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
> > + INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
> > + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
> > +};
> > +
> > +/* some IRQs are compatible with axp20x models */
> > +static const struct regmap_irq axp288_regmap_irqs[] = {
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
> > + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
> > +
> > + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
> > + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
> > + INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
> > + INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
> > + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
> > +
> > + INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
> > + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
> > + INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
> > + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3),
> > + INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
> > + INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
> > + INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
> > + INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
> > +
> > + INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
> > + INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
> > + INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
> > + INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
> > +
> > + INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
> > + INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
> > + INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
> > + INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
> > + INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
> > + INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
> > + INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
> > + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
> > +
> > + INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
> > + INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
> > };
> >
> > static const struct of_device_id axp20x_of_match[] = {
> > @@ -123,19 +231,26 @@ MODULE_DEVICE_TABLE(of, axp20x_of_match);
> > /*
> > * This is useless for OF-enabled devices, but it is needed by I2C
> > subsystem */
> > -static const struct i2c_device_id axp20x_i2c_id[] = {
> > +static const struct i2c_device_id axp2xx_i2c_id[] = {
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, axp2xx_i2c_id);
> > +
> > +static struct acpi_device_id axp2xx_acpi_match[] = {
> > + {
> > + .id = "INT33F4",
> > + .driver_data = (kernel_ulong_t)AXP288_ID,
> > + },
> > { },
> > };
> > -MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
> > +MODULE_DEVICE_TABLE(acpi, axp2xx_acpi_match);
> >
> > -static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
> > - .name = "axp20x_irq_chip",
> > +/* common irq chip attributes only */
> > +static struct regmap_irq_chip axp2xx_regmap_irq_chip = {
> > + .name = "axp2xx_irq_chip",
> > .status_base = AXP20X_IRQ1_STATE,
> > .ack_base = AXP20X_IRQ1_STATE,
> > .mask_base = AXP20X_IRQ1_EN,
> > - .num_regs = 5,
> > - .irqs = axp20x_regmap_irqs,
> > - .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
> > .mask_invert = true,
> > .init_ack_masked = true,
> > };
> > @@ -161,98 +276,218 @@ static struct mfd_cell axp20x_cells[] = {
> > },
> > };
> >
> > -static struct axp20x_dev *axp20x_pm_power_off;
> > -static void axp20x_power_off(void)
> > +static struct resource axp288_adc_resources[] = {
> > + {
> > + .name = "GPADC",
> > + .start = AXP288_IRQ_GPADC,
> > + .end = AXP288_IRQ_GPADC,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > +};
> > +
> > +static struct resource axp288_charger_resources[] = {
> > + {
> > + .start = AXP288_IRQ_OV,
> > + .end = AXP288_IRQ_OV,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_DONE,
> > + .end = AXP288_IRQ_DONE,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_CHARGING,
> > + .end = AXP288_IRQ_CHARGING,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_SAFE_QUIT,
> > + .end = AXP288_IRQ_SAFE_QUIT,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_SAFE_ENTER,
> > + .end = AXP288_IRQ_SAFE_ENTER,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_QCBTU,
> > + .end = AXP288_IRQ_QCBTU,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_CBTU,
> > + .end = AXP288_IRQ_CBTU,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_QCBTO,
> > + .end = AXP288_IRQ_QCBTO,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + {
> > + .start = AXP288_IRQ_CBTO,
> > + .end = AXP288_IRQ_CBTO,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > +};
> > +
> > +static struct mfd_cell axp288_cells[] = {
> > + {
> > + .name = "axp288_adc",
> > + .num_resources = ARRAY_SIZE(axp288_adc_resources),
> > + .resources = axp288_adc_resources,
> > + },
> > + {
> > + .name = "axp288_charger",
> > + .num_resources =
> > ARRAY_SIZE(axp288_charger_resources),
> > + .resources = axp288_charger_resources,
> > + },
> > + {
> > + .name = "axp288_battery",
> > + .num_resources =
> > ARRAY_SIZE(axp288_battery_resources),
> > + .resources = axp288_battery_resources,
> > + },
> > +};
> > +
> > +static struct axp2xx_dev *axp2xx_pm_power_off;
> > +static void axp2xx_power_off(void)
> > {
> > - regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
> > + if (axp2xx_pm_power_off->variant == AXP288_ID)
> > + return;
> > + regmap_write(axp2xx_pm_power_off->regmap, AXP20X_OFF_CTRL,
> > AXP20X_OFF);
> > }
> >
> > -static int axp20x_i2c_probe(struct i2c_client *i2c,
> > - const struct i2c_device_id *id)
> > +static int axp2xx_match_device(struct axp2xx_dev *axp2xx, struct
> > device *dev) {
> > - struct axp20x_dev *axp20x;
> > + const struct acpi_device_id *acpi_id;
> > const struct of_device_id *of_id;
> > +
> > + of_id = of_match_device(axp2xx_of_match, dev);
> > + if (of_id)
> > + axp2xx->variant = (long) of_id->data;
> > + else {
> > + acpi_id =
> > acpi_match_device(dev->driver->acpi_match_table, dev);
> > + if (!acpi_id || !acpi_id->driver_data) {
> > + dev_err(dev, "Unable to determine ID\n");
> > + return -ENODEV;
> > + }
> > + axp2xx->variant = (long) acpi_id->driver_data;
> > + }
> > + switch (axp2xx->variant) {
> > + case AXP202_ID:
> > + case AXP209_ID:
> > + axp2xx->nr_cells = ARRAY_SIZE(axp20x_cells);
> > + axp2xx->cells = axp20x_cells;
> > + axp2xx->regmap_cfg = &axp20x_regmap_config;
> > + axp2xx_regmap_irq_chip.num_regs = 5;
> > + axp2xx_regmap_irq_chip.irqs = axp20x_regmap_irqs;
> > + axp2xx_regmap_irq_chip.num_irqs =
> > + ARRAY_SIZE(axp20x_regmap_irqs);
> > + break;
> > + case AXP288_ID:
> > + axp2xx->cells = axp288_cells;
> > + axp2xx->nr_cells = ARRAY_SIZE(axp288_cells);
> > + axp2xx->regmap_cfg = &axp288_regmap_config;
> > + axp2xx_regmap_irq_chip.irqs = axp288_regmap_irqs;
> > + axp2xx_regmap_irq_chip.num_irqs =
> > + ARRAY_SIZE(axp288_regmap_irqs);
> > + axp2xx_regmap_irq_chip.num_regs = 6;
> > + break;
> > + default:
> > + dev_err(dev, "unsupported AXP2XX ID %lu\n",
> > axp2xx->variant);
> > + return -ENODEV;
> > + }
> > + dev_info(dev, "AXP2xx variant %s found\n",
> > + axp2xx_model_names[axp2xx->variant]);
> > +
> > + return 0;
> > +}
> > +
> > +static int axp2xx_i2c_probe(struct i2c_client *i2c,
> > + const struct i2c_device_id *id)
> > +{
> > + struct axp2xx_dev *axp2xx;
> > int ret;
> >
> > - axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x),
> > GFP_KERNEL);
> > - if (!axp20x)
> > + axp2xx = devm_kzalloc(&i2c->dev, sizeof(*axp2xx),
> > GFP_KERNEL);
> > + if (!axp2xx)
> > return -ENOMEM;
> >
> > - of_id = of_match_device(axp20x_of_match, &i2c->dev);
> > - if (!of_id) {
> > - dev_err(&i2c->dev, "Unable to setup AXP20X
> > data\n");
> > - return -ENODEV;
> > - }
> > - axp20x->variant = (long) of_id->data;
> > + ret = axp2xx_match_device(axp2xx, &i2c->dev);
> > + if (ret)
> > + return ret;
> >
> > - axp20x->i2c_client = i2c;
> > - axp20x->dev = &i2c->dev;
> > - dev_set_drvdata(axp20x->dev, axp20x);
> > + axp2xx->i2c_client = i2c;
> > + axp2xx->dev = &i2c->dev;
> > + dev_set_drvdata(axp2xx->dev, axp2xx);
> >
> > - axp20x->regmap = devm_regmap_init_i2c(i2c,
> > &axp20x_regmap_config);
> > - if (IS_ERR(axp20x->regmap)) {
> > - ret = PTR_ERR(axp20x->regmap);
> > + axp2xx->regmap = devm_regmap_init_i2c(i2c,
> > axp2xx->regmap_cfg);
> > + if (IS_ERR(axp2xx->regmap)) {
> > + ret = PTR_ERR(axp2xx->regmap);
> > dev_err(&i2c->dev, "regmap init failed: %d\n",
> > ret); return ret;
> > }
> >
> > - ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
> > + ret = regmap_add_irq_chip(axp2xx->regmap, i2c->irq,
> > IRQF_ONESHOT | IRQF_SHARED, -1,
> > - &axp20x_regmap_irq_chip,
> > - &axp20x->regmap_irqc);
> > + &axp2xx_regmap_irq_chip,
> > + &axp2xx->regmap_irqc);
> > if (ret) {
> > dev_err(&i2c->dev, "failed to add irq chip: %d\n",
> > ret); return ret;
> > }
> >
> > - ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
> > - ARRAY_SIZE(axp20x_cells), NULL, 0,
> > NULL);
> > + ret = mfd_add_devices(axp2xx->dev, -1, axp2xx->cells,
> > + axp2xx->nr_cells, NULL, 0, NULL);
> >
> > if (ret) {
> > dev_err(&i2c->dev, "failed to add MFD devices:
> > %d\n", ret);
> > - regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
> > + regmap_del_irq_chip(i2c->irq, axp2xx->regmap_irqc);
> > return ret;
> > }
> >
> > if (!pm_power_off) {
> > - axp20x_pm_power_off = axp20x;
> > - pm_power_off = axp20x_power_off;
> > + axp2xx_pm_power_off = axp2xx;
> > + pm_power_off = axp2xx_power_off;
> > }
> >
> > - dev_info(&i2c->dev, "AXP20X driver loaded\n");
> > + dev_info(&i2c->dev, "AXP2XX driver loaded\n");
> >
> > return 0;
> > }
> >
> > -static int axp20x_i2c_remove(struct i2c_client *i2c)
> > +static int axp2xx_i2c_remove(struct i2c_client *i2c)
> > {
> > - struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
> > + struct axp2xx_dev *axp2xx = i2c_get_clientdata(i2c);
> >
> > - if (axp20x == axp20x_pm_power_off) {
> > - axp20x_pm_power_off = NULL;
> > + if (axp2xx == axp2xx_pm_power_off) {
> > + axp2xx_pm_power_off = NULL;
> > pm_power_off = NULL;
> > }
> >
> > - mfd_remove_devices(axp20x->dev);
> > - regmap_del_irq_chip(axp20x->i2c_client->irq,
> > axp20x->regmap_irqc);
> > + mfd_remove_devices(axp2xx->dev);
> > + regmap_del_irq_chip(axp2xx->i2c_client->irq,
> > axp2xx->regmap_irqc);
> > return 0;
> > }
> >
> > -static struct i2c_driver axp20x_i2c_driver = {
> > +static struct i2c_driver axp2xx_i2c_driver = {
> > .driver = {
> > - .name = "axp20x",
> > + .name = "axp2xx",
> > .owner = THIS_MODULE,
> > - .of_match_table =
> > of_match_ptr(axp20x_of_match),
> > + .of_match_table =
> > of_match_ptr(axp2xx_of_match),
> > + .acpi_match_table = ACPI_PTR(axp2xx_acpi_match),
> > },
> > - .probe = axp20x_i2c_probe,
> > - .remove = axp20x_i2c_remove,
> > - .id_table = axp20x_i2c_id,
> > + .probe = axp2xx_i2c_probe,
> > + .remove = axp2xx_i2c_remove,
> > + .id_table = axp2xx_i2c_id,
> > };
> >
> > -module_i2c_driver(axp20x_i2c_driver);
> > +module_i2c_driver(axp2xx_i2c_driver);
> >
> > -MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
> > +MODULE_DESCRIPTION("PMIC MFD core driver for AXP2XX");
> > MODULE_AUTHOR("Carlo Caione <carlo@...one.org>");
> > MODULE_LICENSE("GPL");
> > diff --git a/include/linux/mfd/axp2xx.h b/include/linux/mfd/axp2xx.h
> > index a36d91b..331cf6e 100644
> > --- a/include/linux/mfd/axp2xx.h
> > +++ b/include/linux/mfd/axp2xx.h
> > @@ -14,6 +14,8 @@
> > enum {
> > AXP202_ID = 0,
> > AXP209_ID,
> > + AXP288_ID,
> > + NR_AXP2XX_VARIANTS,
> > };
> >
> > #define AXP20X_DATACACHE(m) (0x04 + (m))
> > @@ -49,11 +51,13 @@ enum {
> > #define AXP20X_IRQ3_EN 0x42
> > #define AXP20X_IRQ4_EN 0x43
> > #define AXP20X_IRQ5_EN 0x44
> > +#define AXP20X_IRQ6_EN 0x45
> > #define AXP20X_IRQ1_STATE 0x48
> > #define AXP20X_IRQ2_STATE 0x49
> > #define AXP20X_IRQ3_STATE 0x4a
> > #define AXP20X_IRQ4_STATE 0x4b
> > #define AXP20X_IRQ5_STATE 0x4c
> > +#define AXP20X_IRQ6_STATE 0x4d
> >
> > /* ADC */
> > #define AXP20X_ACIN_V_ADC_H 0x56
> > @@ -116,6 +120,15 @@ enum {
> > #define AXP20X_CC_CTRL 0xb8
> > #define AXP20X_FG_RES 0xb9
> >
> > +/* AXP288 specific registers */
> > +#define AXP288_PMIC_ADC_H 0x56
> > +#define AXP288_PMIC_ADC_L 0x57
> > +#define AXP288_ADC_TS_PIN_CTRL 0x84
> > +
> > +#define AXP288_PMIC_ADC_EN 0x84
> > +#define AXP288_FG_TUNE5 0xed
> > +
> > +
> > /* Regulators IDs */
> > enum {
> > AXP20X_LDO1 = 0,
> > @@ -169,12 +182,57 @@ enum {
> > AXP20X_IRQ_GPIO0_INPUT,
> > };
> >
> > -struct axp20x_dev {
> > +enum axp288_irqs {
> > + AXP288_IRQ_VBUS_FALL = 2,
> > + AXP288_IRQ_VBUS_RISE,
> > + AXP288_IRQ_OV,
> > + AXP288_IRQ_FALLING_ALT,
> > + AXP288_IRQ_RISING_ALT,
> > + AXP288_IRQ_OV_ALT,
> > + AXP288_IRQ_DONE = 10,
> > + AXP288_IRQ_CHARGING,
> > + AXP288_IRQ_SAFE_QUIT,
> > + AXP288_IRQ_SAFE_ENTER,
> > + AXP288_IRQ_ABSENT,
> > + AXP288_IRQ_APPEND,
> > + AXP288_IRQ_QWBTU,
> > + AXP288_IRQ_WBTU,
> > + AXP288_IRQ_QWBTO,
> > + AXP288_IRQ_WBTO,
> > + AXP288_IRQ_QCBTU,
> > + AXP288_IRQ_CBTU,
> > + AXP288_IRQ_QCBTO,
> > + AXP288_IRQ_CBTO,
> > + AXP288_IRQ_WL2,
> > + AXP288_IRQ_WL1,
> > + AXP288_IRQ_GPADC,
> > + AXP288_IRQ_OT = 31,
> > + AXP288_IRQ_GPIO0,
> > + AXP288_IRQ_GPIO1,
> > + AXP288_IRQ_POKO,
> > + AXP288_IRQ_POKL,
> > + AXP288_IRQ_POKS,
> > + AXP288_IRQ_POKN,
> > + AXP288_IRQ_POKP,
> > + AXP288_IRQ_TIMER,
> > + AXP288_IRQ_MV_CHNG,
> > + AXP288_IRQ_BC_USB_CHNG,
> > +};
> > +
> > +#define AXP288_TS_ADC_H 0x58
> > +#define AXP288_TS_ADC_L 0x59
> > +#define AXP288_GP_ADC_H 0x5a
> > +#define AXP288_GP_ADC_L 0x5b
> > +
> > +struct axp2xx_dev {
> > struct device *dev;
> > struct i2c_client *i2c_client;
> > struct regmap *regmap;
> > struct regmap_irq_chip_data *regmap_irqc;
> > long variant;
> > + int nr_cells;
> > + struct mfd_cell *cells;
> > + struct regmap_config *regmap_cfg;
> > };
> >
> > #endif /* __LINUX_MFD_AXP2XX_H */
>
[Jacob Pan]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists