[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5417BC57.4030504@amd.com>
Date: Mon, 15 Sep 2014 23:28:07 -0500
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
To: <catalin.marinas@....com>, <will.deacon@....com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-acpi@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>, <astone@...hat.com>,
<hanjun.guo@...aro.org>, <rjw@...ysocki.net>,
<marc.zyngier@....com>, <mark.rutland@....com>,
<Sudeep.Holla@....com>, <olof@...om.net>,
<grant.likely@...aro.org>, <graeme.gregory@...aro.org>,
<arnd@...db.de>, <jason@...edaemon.net>
Subject: Re: [RFC PATCH for AMD Seattle 0/4] Drivers for AMD-Seatlle to boot
from ACPI
Note: Correcting the typo for linux-acpi mailing list in this reply.
Also, I would like to add the link to the "AMD Opteron™ A1100 Series
Processor ACPI Porting Guide", which describes the current ACPI table
for AMD Seattle platform here:
http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf
Suravee
On 09/15/2014 07:47 PM, suravee.suthikulpanit@....com wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
>
> As a follow up of the email thread:
>
> [PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1
> https://lkml.org/lkml/2014/9/1/446
>
> Besides Hanjun Guo's patches above, these are the additional patches required
> to boot AMD Seattle platform with full ACPI support:
>
> [PATCH] efi/arm64: efistub: don't abort if base of DRAM is occupied
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272274.html
>
> [PATCH v2] efi/arm64: fix fdt-related memory reservation
> https://lkml.org/lkml/2014/9/8/483
>
> [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
> https://lkml.org/lkml/2014/9/9/834
>
> [RFC PATCH for Juno 2/2] tty: SBSA compatible UART
> https://lkml.org/lkml/2014/9/1/448
> (NOTE: This is not meant to be submitted upstream, but required to enable
> ACPI support for UART SBSA driver.)
>
> These patches are rebased from the linux-3.17-rc4 upstream kernel, and
> compatible with the AMD Seattle Firmware version ROD0070C.
> The full kernel boot log can be found here:
>
> http://people.linaro.org/~al.stone/seattle-boot-acpi-dmesg.txt
>
> Suravee / Al
>
> Ard Biesheuvel (1):
> arm64/efi: efistub: don't abort if base of DRAM is occupied
>
> Grame Gregory (1):
> [RFC PATCH for Juno 2/2] tty: SBSA compatible UART
>
> Mark Salter (1):
> efi/arm64: fix fdt-related memory reservation
>
> Suravee Suthikulpanit (1):
> ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
>
> arch/arm64/kernel/efi-stub.c | 16 +-
> arch/arm64/mm/init.c | 3 +-
> drivers/ata/Kconfig | 2 +-
> drivers/ata/ahci_platform.c | 13 ++
> drivers/firmware/efi/libstub/fdt.c | 10 +-
> drivers/tty/Kconfig | 6 +
> drivers/tty/Makefile | 1 +
> drivers/tty/sbsauart.c | 328 +++++++++++++++++++++++++++++++++++++
> 8 files changed, 365 insertions(+), 14 deletions(-)
> create mode 100644 drivers/tty/sbsauart.c
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists