| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1410868367-11056-1-git-send-email-mika.westerberg@linux.intel.com>
Date: Tue, 16 Sep 2014 14:52:31 +0300
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: linux-acpi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Bryan Wu <cooloney@...il.com>,
Lee Jones <lee.jones@...aro.org>,
Grant Likely <grant.likely@...aro.org>,
Arnd Bergmann <arnd@...db.de>, Aaron Lu <aaron.lu@...el.com>,
Darren Hart <dvhart@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: [RFC PATCH v2 00/16] Add ACPI _DSD and unified device properties support
This is a second revision of the patches first submitted here [1].
The recent publication of the ACPI 5.1 specification [2] adds a reserved name
for Device Specific Data (_DSD, Section 6.2.5). This mechanism allows for
passing arbitrary hardware description data to the OS. The exact format of the
_DSD data is specific to the UUID paired with it [3].
An ACPI Device Properties UUID has been defined [4] to provide a format
compatible with existing device tree schemas. The purpose for this was to
allow for the reuse of the existing schemas and encourage the development
of firmware agnostic device drivers.
This series accomplishes the following (as well as some other dependencies):
* Add _DSD support to the ACPI core
This simply reads the UUID and the accompanying Package
* Add ACPI Device Properties _DSD format support
This understands the hierarchical key:value pair structure
defined by the Device Properties UUID
* Add a unified device properties API with ACPI and OF backends
This provides for the firmware agnostic device properties
Interface to be used by drivers
* Provides 3 example drivers that were previously Device Tree aware that
can now be used with either Device Tree or ACPI Device Properties. The
drivers use "PRP0001" as their _HID which means that the match should be
done using driver's .of_match_table instead.
The patch series has been tested on Minnoboard and Minnowboard MAX and the
relevant part of DSDTs are at the end of this cover letter.
This series does not provide for a means to append to a system DSDT. That
will ultimately be required to make the most effective use of the _DSD
mechanism. Work is underway on that as a separate effort.
Most important changes to the previous RFC version:
* Added wrapper functions for most used property types
* Return -EOVERFLOW in case integer would not fit to a type
* Dropped dev_prop_ops
* We now have dev_node_xxx() functions to access firmware node
properties without dev pointer
* The accessor function names try to be close to their corresponding of_*
counterpart
* Tried to have a bit better examples in the documentation patch
* gpiolib got support for _DSD and also it now understand firmware node
properties with dev_node_get_named_gpiod() that requests the GPIO
properly.
* Support for "PRP0001" _HID/_CID. This means that the match should be
done using driver .of_match_table instead.
* Add unified property support for at25 SPI eeprom driver as well.
[1] https://lkml.org/lkml/2014/8/17/10
[2] http://www.uefi.org/sites/default/files/resources/ACPI_5_1release.pdf
[3] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
[4] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
Aaron Lu (2):
input: gpio_keys_polled - Add support for GPIO descriptors
input: gpio_keys_polled - Make use of device property API
Max Eliaser (2):
leds: leds-gpio: Make use of device property API
leds: leds-gpio: Add ACPI probing support
Mika Westerberg (11):
ACPI: Add support for device specific properties
ACPI: Allow drivers to match using Device Tree compatible property
ACPI: Document ACPI device specific properties
mfd: Add ACPI support
gpio / ACPI: Add support for _DSD device properties
gpio: Add support for unified device properties interface
gpio: sch: Consolidate core and resume banks
leds: leds-gpio: Add support for GPIO descriptors
input: gpio_keys_polled - Add ACPI probing support
misc: at25: Make use of device property API
misc: at25: Add ACPI probing support
Rafael J. Wysocki (1):
Driver core: Unified device properties interface for platform firmware
Documentation/acpi/enumeration.txt | 27 ++
Documentation/acpi/properties.txt | 410 +++++++++++++++++++++
drivers/acpi/Makefile | 1 +
drivers/acpi/internal.h | 6 +
drivers/acpi/property.c | 584 ++++++++++++++++++++++++++++++
drivers/acpi/scan.c | 93 ++++-
drivers/base/Makefile | 2 +-
drivers/base/property.c | 196 ++++++++++
drivers/gpio/devres.c | 35 ++
drivers/gpio/gpio-sch.c | 293 ++++++---------
drivers/gpio/gpiolib-acpi.c | 78 +++-
drivers/gpio/gpiolib.c | 85 ++++-
drivers/gpio/gpiolib.h | 7 +-
drivers/input/keyboard/gpio_keys_polled.c | 169 +++++----
drivers/leds/leds-gpio.c | 188 +++++-----
drivers/mfd/mfd-core.c | 40 ++
drivers/misc/eeprom/at25.c | 41 +--
drivers/of/base.c | 188 ++++++++++
include/acpi/acpi_bus.h | 8 +
include/linux/acpi.h | 90 ++++-
include/linux/gpio/consumer.h | 7 +
include/linux/gpio_keys.h | 3 +
include/linux/leds.h | 1 +
include/linux/mfd/core.h | 3 +
include/linux/of.h | 37 ++
include/linux/property.h | 193 ++++++++++
26 files changed, 2377 insertions(+), 408 deletions(-)
create mode 100644 Documentation/acpi/properties.txt
create mode 100644 drivers/acpi/property.c
create mode 100644 drivers/base/property.c
create mode 100644 include/linux/property.h
DSDT modifications for Minnowboard (for leds-gpio.c and gpio_keys_polled.c)
---------------------------------------------------------------------------
Scope (\_SB.PCI0.LPC)
{
Device (LEDS)
{
Name (_HID, "PRP0001")
Name (_CRS, ResourceTemplate () {
GpioIo (Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly,
"\\_SB.PCI0.LPC", 0, ResourceConsumer) {10}
GpioIo (Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly,
"\\_SB.PCI0.LPC", 0, ResourceConsumer) {11}
})
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", Package () {"gpio-leds"}},
}
})
Device (LEDH)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"label", "Heartbeat"},
Package () {"gpios", Package () {^^LEDS, 0, 0, 0}},
Package () {"linux,default-trigger", "heartbeat"},
Package () {"linux,default-state", "off"},
Package () {"linux,retain-state-suspended", 1},
}
})
}
Device (LEDM)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"label", "MMC0 Activity"},
Package () {"gpios", Package () {^^LEDS, 1, 0, 0}},
Package () {"linux,default-trigger", "mmc0"},
Package () {"linux,default-state", "off"},
Package () {"linux,retain-state-suspended", 1},
}
})
}
}
Device (BTNS)
{
Name (_HID, "PRP0001")
Name (_CRS, ResourceTemplate () {
GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
"\\_SB.PCI0.LPC", 0, ResourceConsumer) {0, 1, 2, 3}
})
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", Package () {"gpio-keys-polled"}},
Package () {"poll-interval", 100},
Package () {"autorepeat", 1}
}
})
Device (BTN0)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"linux,code", 105},
Package () {"linux,input-type", 1},
Package () {"gpios", Package () {^^BTNS, 0, 0, 1}},
}
})
}
Device (BTN1)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"linux,code", 108},
Package () {"linux,input-type", 1},
Package () {"gpios", Package (4) {^^BTNS, 0, 1, 1}},
}
})
}
Device (BTN2)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"linux,code", 103},
Package () {"linux,input-type", 1},
Package () {"gpios", Package () {^^BTNS, 0, 2, 1}},
}
})
}
Device (BTN3)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () {"linux,code", 106},
Package () {"linux,input-type", 1},
Package () {"gpios", Package (4) {^^BTNS, 0, 3, 1}},
}
})
}
}
}
DSDT modifications for Minnowboard MAX (for at25.c)
---------------------------------------------------
Scope (\_SB.SPI1)
{
Device (AT25)
{
Name (_HID, "PRP0001")
Method (_CRS, 0, Serialized) {
Name (UBUF, ResourceTemplate () {
SpiSerialBus (0x0000, PolarityLow, FourWireMode, 0x08,
ControllerInitiated, 0x007A1200, ClockPolarityLow,
ClockPhaseSecond, "\\_SB.SPI1",
0x00, ResourceConsumer)
})
Return (UBUF)
}
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", Package () {"atmel,at25"}},
Package () {"size", 1024},
Package () {"pagesize", 32},
Package () {"address-width", 16},
}
})
Method (_STA, 0, NotSerialized)
{
Return (0xF)
}
}
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists