| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Sep 2014 17:54:01 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: broonie@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, Heiko Stuebner <heiko@...ech.de>
Subject: [PATCH v2 1/4] regulator: fan53555: use set_ramp_delay to set the ramp up slew rate
The regulator constraints already provide a field for the ramp_delay, so
there is no need to set this manually. Therefore implement the set_ramp_delay
callback and convert the pdata value to the constraint value if necessary.
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
drivers/regulator/fan53555.c | 53 +++++++++++++++++++++++++++++++++++---------
1 file changed, 42 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index c912ba7..5808435 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -135,6 +135,38 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
}
+static int slew_rates[] = {
+ 64000,
+ 32000,
+ 16000,
+ 8000,
+ 4000,
+ 2000,
+ 1000,
+ 500,
+};
+
+static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
+{
+ struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+ int regval = -1, i;
+
+ for (i = 0; i < ARRAY_SIZE(slew_rates); i++) {
+ if (ramp <= slew_rates[i])
+ regval = i;
+ else
+ break;
+ }
+
+ if (regval < 0) {
+ dev_err(di->dev, "unsupported ramp value %d\n", ramp);
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(di->regmap, FAN53555_CONTROL,
+ CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
+}
+
static struct regulator_ops fan53555_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -146,6 +178,7 @@ static struct regulator_ops fan53555_regulator_ops = {
.is_enabled = regulator_is_enabled_regmap,
.set_mode = fan53555_set_mode,
.get_mode = fan53555_get_mode,
+ .set_ramp_delay = fan53555_set_ramp,
};
/* For 00,01,03,05 options:
@@ -156,8 +189,6 @@ static struct regulator_ops fan53555_regulator_ops = {
static int fan53555_device_setup(struct fan53555_device_info *di,
struct fan53555_platform_data *pdata)
{
- unsigned int reg, data, mask;
-
/* Setup voltage control register */
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
@@ -190,15 +221,8 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
"Chip ID[%d]\n not supported!\n", di->chip_id);
return -EINVAL;
}
- /* Init slew rate */
- if (pdata->slew_rate & 0x7)
- di->slew_rate = pdata->slew_rate;
- else
- di->slew_rate = FAN53555_SLEW_RATE_64MV;
- reg = FAN53555_CONTROL;
- data = di->slew_rate << CTL_SLEW_SHIFT;
- mask = CTL_SLEW_MASK;
- return regmap_update_bits(di->regmap, reg, mask, data);
+
+ return 0;
}
static int fan53555_regulator_register(struct fan53555_device_info *di,
@@ -248,6 +272,13 @@ static int fan53555_regulator_probe(struct i2c_client *client,
if (!di)
return -ENOMEM;
+ /* if no ramp constraint set, get the pdata ramp_delay */
+ if (!di->regulator->constraints.ramp_delay) {
+ int slew_idx = (pdata->slew_rate & 0x7) ? pdata->slew_rate : 0;
+
+ di->regulator->constraints.ramp_delay = slew_rates[slew_idx];
+ }
+
di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
if (IS_ERR(di->regmap)) {
dev_err(&client->dev, "Failed to allocate regmap!\n");
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists