| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1410947881-7345-3-git-send-email-b38343@freescale.com>
Date: Wed, 17 Sep 2014 17:57:59 +0800
From: Robin Gong <b38343@...escale.com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<shawn.guo@...escale.com>, <kernel@...gutronix.de>,
<sre@...nel.org>, <dbaryshkov@...il.com>, <dwmw2@...radead.org>,
<grant.likely@...aro.org>, <linux@....linux.org.uk>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v3 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6
This driver register pm_power_off with snvs power off function. If
your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use
other pin to do, please disable the driver in dts, otherwise, your
pm_power_off maybe overwrote by this driver.
Signed-off-by: Robin Gong <b38343@...escale.com>
---
.../bindings/power_supply/imx-snvs-poweroff.txt | 23 +++++++
drivers/power/reset/Kconfig | 9 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/imx-snvs-poweroff.c | 66 ++++++++++++++++++++
4 files changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
create mode 100644 drivers/power/reset/imx-snvs-poweroff.c
diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
new file mode 100644
index 0000000..6caf64e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
@@ -0,0 +1,23 @@
+i.mx6 Poweroff Driver
+
+SNVS_LPCR in SNVS module can power off the whole system by pull
+PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
+If you don't want to use PMIC_ON_REQ as power on/off control,
+please set status='disabled' to disable this driver.
+
+Required Properties:
+-compatible: "fsl,sec-v4.0-poweroff"
+-reg: Specifies the physical address of the SNVS_LPCR register
+
+Example:
+ snvs@...cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+ .....
+ snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ };
+ }
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index ca41523..b26c547 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -45,6 +45,15 @@ config POWER_RESET_HISI
help
Reboot support for Hisilicon boards.
+config POWER_RESET_IMX
+ bool "IMX6 power-off driver"
+ depends on POWER_RESET && SOC_IMX6
+ help
+ This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
+ boards.If you want to use other pin to control external power,please
+ say N here or disable in dts to make sure pm_power_off never be
+ overwrote wrongly by this driver.
+
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on POWER_RESET && ARCH_QCOM
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a42e70e..2524daf 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
new file mode 100644
index 0000000..d726ac4
--- /dev/null
+++ b/drivers/power/reset/imx-snvs-poweroff.c
@@ -0,0 +1,66 @@
+/* Power off driver for i.mx6
+ * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved.
+ *
+ * based on msm-poweroff.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+static void __iomem *snvs_base;
+
+static void do_imx_poweroff(void)
+{
+ u32 value = readl(snvs_base);
+
+ /* set TOP and DP_EN bit */
+ writel(value | 0x60, snvs_base);
+}
+
+static int imx_poweroff_probe(struct platform_device *pdev)
+{
+ snvs_base = of_iomap(pdev->dev.of_node, 0);
+ if (!snvs_base) {
+ dev_err(&pdev->dev, "failed to get memory\n");
+ return -EIO;
+ }
+
+ pm_power_off = do_imx_poweroff;
+ return 0;
+}
+
+static const struct of_device_id of_imx_poweroff_match[] = {
+ { .compatible = "fsl,sec-v4.0-poweroff", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
+
+static struct platform_driver imx_poweroff_driver = {
+ .probe = imx_poweroff_probe,
+ .driver = {
+ .name = "imx-snvs-poweroff",
+ .of_match_table = of_match_ptr(of_imx_poweroff_match),
+ },
+};
+
+static int __init imx_poweroff_init(void)
+{
+ return platform_driver_register(&imx_poweroff_driver);
+}
+device_initcall(imx_poweroff_init);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists