| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <000001cfd294$18e4e300$4aaea900$@codeaurora.org>
Date: Wed, 17 Sep 2014 19:26:05 +0300
From: "Yaniv Gardi" <ygardi@...eaurora.org>
To: <James.Bottomley@...senPartnership.com>, <hch@...radead.org>
Cc: <linux-kernel@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <santoshsy@...il.com>,
<linux-scsi-owner@...r.kernel.org>, <subhashj@...eaurora.org>,
<noag@...eaurora.org>, <draviv@...eaurora.org>,
"'Rob Herring'" <robh+dt@...nel.org>,
"'Pawel Moll'" <pawel.moll@....com>,
"'Mark Rutland'" <mark.rutland@....com>,
"'Ian Campbell'" <ijc+devicetree@...lion.org.uk>,
"'Kumar Gala'" <galak@...eaurora.org>,
"'Kishon Vijay Abraham I'" <kishon@...com>,
"'Vinayak Holikatti'" <vinholikatti@...il.com>,
"'James E.J. Bottomley'" <JBottomley@...allels.com>,
"'Grant Likely'" <grant.likely@...aro.org>,
"'Raviv Shvili'" <rshvili@...eaurora.org>,
"'Sujit Reddy Thumma'" <sthumma@...eaurora.org>,
"'Christoph Hellwig'" <hch@....de>,
"'Sahitya Tummala'" <stummala@...eaurora.org>,
"'open list:OPEN FIRMWARE AND...'" <devicetree@...r.kernel.org>
Subject: RE: [PATCH v4] scsi: ufs: add support of generic PHY framework in Qualcomm MSM chips
This change depends on draviv [PATCH v3] series of 16 changes that was
already uploaded.
Soon draviv will uploaded again as [PATCH v4] that contain 17 patches, and
this change will be dependent on this serie,
Thanks,
Yaniv
-----Original Message-----
From: Yaniv Gardi [mailto:ygardi@...eaurora.org]
Sent: Wednesday, September 17, 2014 7:22 PM
To: James.Bottomley@...senPartnership.com; hch@...radead.org
Cc: linux-kernel@...r.kernel.org; linux-scsi@...r.kernel.org;
linux-arm-msm@...r.kernel.org; santoshsy@...il.com;
linux-scsi-owner@...r.kernel.org; subhashj@...eaurora.org;
ygardi@...eaurora.org; noag@...eaurora.org; draviv@...eaurora.org; Rob
Herring; Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Kishon Vijay
Abraham I; Vinayak Holikatti; James E.J. Bottomley; Grant Likely; Raviv
Shvili; Sujit Reddy Thumma; Christoph Hellwig; Sahitya Tummala; open
list:OPEN FIRMWARE AND...
Subject: [PATCH v4] scsi: ufs: add support of generic PHY framework in
Qualcomm MSM chips
In this change we add support to the generic PHY framework.
Two UFS phys are implemented:
qmp-20nm and qmp-28nm.
Also, the files in this change implement the UFS HW (controller & PHY)
specific behavior in Qualcomm chips.
Relocation of a few header files is needed in order to expose routines
and data structures between PHY driver and UFS driver
Signed-off-by: Yaniv Gardi <ygardi@...eaurora.org>
---
.../devicetree/bindings/phy/qcom-ufs-phy.txt | 37 +
drivers/phy/Makefile | 3 +
drivers/phy/phy-qcom-ufs-qmp-20nm.c | 259 ++++++
drivers/phy/phy-qcom-ufs-qmp-20nm.h | 216 +++++
drivers/phy/phy-qcom-ufs-qmp-28nm.c | 342 ++++++++
drivers/phy/phy-qcom-ufs-qmp-28nm.h | 738 ++++++++++++++++++
drivers/phy/phy-qcom-ufs.c | 661 ++++++++++++++++
drivers/scsi/ufs/Kconfig | 12 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-qcom.c | 866
+++++++++++++++++++++
drivers/scsi/ufs/ufs.h | 491 ------------
drivers/scsi/ufs/ufshcd-pci.c | 2 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
drivers/scsi/ufs/ufshcd.c | 14 +-
drivers/scsi/ufs/ufshcd.h | 595 --------------
drivers/scsi/ufs/unipro.h | 207 -----
include/linux/phy/phy-qcom-ufs.h | 202 +++++
include/linux/scsi/ufs/ufs-qcom.h | 156 ++++
include/linux/scsi/ufs/ufs.h | 491 ++++++++++++
include/linux/scsi/ufs/ufshcd.h | 635 +++++++++++++++
include/linux/scsi/ufs/unipro.h | 207 +++++
21 files changed, 4840 insertions(+), 1297 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom-ufs-phy.txt
create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.c
create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.h
create mode 100644 drivers/phy/phy-qcom-ufs-qmp-28nm.c
create mode 100644 drivers/phy/phy-qcom-ufs-qmp-28nm.h
create mode 100644 drivers/phy/phy-qcom-ufs.c
create mode 100644 drivers/scsi/ufs/ufs-qcom.c
delete mode 100644 drivers/scsi/ufs/ufs.h
delete mode 100644 drivers/scsi/ufs/ufshcd.h
delete mode 100644 drivers/scsi/ufs/unipro.h
create mode 100644 include/linux/phy/phy-qcom-ufs.h
create mode 100644 include/linux/scsi/ufs/ufs-qcom.h
create mode 100644 include/linux/scsi/ufs/ufs.h
create mode 100644 include/linux/scsi/ufs/ufshcd.h
create mode 100644 include/linux/scsi/ufs/unipro.h
diff --git a/Documentation/devicetree/bindings/phy/qcom-ufs-phy.txt
b/Documentation/devicetree/bindings/phy/qcom-ufs-phy.txt
new file mode 100644
index 0000000..8a6798f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-ufs-phy.txt
@@ -0,0 +1,37 @@
+* QCOM Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible : compatible list, contains "qcom,ufs-phy-qmp-28nm"
+ or "qcom,ufs-phy-qmp-20nm" according to the relevant
+ phy in use
+- reg : <registers mapping>
+- #phy-cells : This property shall be set to 0
+- vdda-phy-supply : phandle to main PHY supply for analog domain
+- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy
supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll
supply
+
+Example:
+
+ ufsphy1: ufsphy@...c597000 {
+ compatible = "qcom,ufs-phy-qmp-28nm";
+ reg = <0xfc597000 0x800>;
+ #phy-cells = <0>;
+ vdda-phy-supply = <&pma8084_l4>;
+ vdda-pll-supply = <&pma8084_l12>;
+ vdda-phy-max-microamp = <50000>;
+ vdda-pll-max-microamp = <1000>;
+ };
+
+ ufshc@...c598000 {
+ ...
+ phys = <&ufsphy1>;
+ };
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 95c69ed..eac4854 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -28,3 +28,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) +=
phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+obj-$(CONFIG_SCSI_UFS_QCOM) += phy-qcom-ufs.o
+obj-$(CONFIG_SCSI_UFS_QCOM) += phy-qcom-ufs-qmp-28nm.o
+obj-$(CONFIG_SCSI_UFS_QCOM) += phy-qcom-ufs-qmp-20nm.o
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
new file mode 100644
index 0000000..b6dcf2d
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/phy/phy-qcom-ufs.h>
+#include "phy-qcom-ufs-qmp-20nm.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
+
+static
+int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy)
+{
+ struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
+ int tbl_size_A, tbl_size_B;
+ int rate = UFS_QCOM_LIMIT_HS_RATE;
+ int err;
+
+ tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
+ tbl_A = phy_cal_table_rate_A;
+
+ tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+ tbl_B = phy_cal_table_rate_B;
+
+ err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
+ tbl_B, tbl_size_B, rate);
+
+ if (err)
+ dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate()
failed %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy
*phy_common)
+{
+ phy_common->quirks =
+ UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy);
+ struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+ int err = 0;
+
+ err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks()
failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s:
ufs_qcom_phy_init_vregulators() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
+
+out:
+ return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool
val)
+{
+ bool hibern8_exit_after_pwr_collapse = phy->quirks &
+ UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+
+ if (val) {
+ writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * Before any transactions involving PHY, ensure PHY knows
+ * that it's analog rail is powered ON.
+ */
+ mb();
+
+ if (hibern8_exit_after_pwr_collapse) {
+ /*
+ * Give atleast 1us delay after restoring PHY analog
+ * power.
+ */
+ usleep_range(1, 2);
+ writel_relaxed(0x0A, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ writel_relaxed(0x08, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ /*
+ * Make sure workaround is deactivated before
proceeding
+ * with normal PHY operations.
+ */
+ mb();
+ }
+ } else {
+ if (hibern8_exit_after_pwr_collapse) {
+ writel_relaxed(0x0A, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ writel_relaxed(0x02, phy->mmio +
+ QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+ /*
+ * Make sure that above workaround is activated
before
+ * PHY analog power collapse.
+ */
+ mb();
+ }
+
+ writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * ensure that PHY knows its PHY analog rail is going
+ * to be powered down
+ */
+ mb();
+ }
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32
val)
+{
+ writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
+ phy->mmio + UFS_PHY_TX_LANE_ENABLE);
+ /*
+ * ensure that TX_LANE_ENABLE_MASK is written to PHY before it
+ * continues
+ */
+ mb();
+}
+
+static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy
*phy)
+{
+ u32 tmp;
+
+ tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+ tmp &= ~MASK_SERDES_START;
+ tmp |= (1 << OFFSET_SERDES_START);
+ writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+ /*
+ * ensure that UFS_PHY_PHY_START is written to PHY before before it
+ * continues
+ */
+ mb();
+}
+
+static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy
*phy_common)
+{
+ int err = 0;
+ u32 val;
+
+ err = readl_poll_timeout(phy_common->mmio +
UFS_PHY_PCS_READY_STATUS,
+ val, (val & MASK_PCS_READY), 10, 1000000);
+ if (err)
+ dev_err(phy_common->dev, "%s: poll for pcs failed err =
%d\n",
+ __func__, err);
+ return err;
+}
+
+struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
+ .init = ufs_qcom_phy_qmp_20nm_init,
+ .exit = ufs_qcom_phy_exit,
+ .power_on = ufs_qcom_phy_power_on,
+ .power_off = ufs_qcom_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
+ .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
+ .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
+ .is_physical_coding_sublayer_ready =
ufs_qcom_phy_qmp_20nm_is_pcs_ready,
+ .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
+ .power_control = ufs_qcom_phy_qmp_20nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy;
+ struct ufs_qcom_phy_qmp_20nm *phy;
+ int err = 0;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+ &ufs_qcom_phy_qmp_20nm_phy_ops,
&phy_20nm_ops);
+
+ if (!generic_phy) {
+ dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+ __func__);
+ err = -EIO;
+ goto out;
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+ sizeof(phy->common_cfg.name));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = to_phy(dev);
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int err = 0;
+
+ err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+ if (err)
+ dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
+ {.compatible = "qcom,ufs-phy-qmp-20nm"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
+ .probe = ufs_qcom_phy_qmp_20nm_probe,
+ .remove = ufs_qcom_phy_qmp_20nm_remove,
+ .driver = {
+ .of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
+ .name = "ufs_qcom_phy_qmp_20nm",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h
b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
new file mode 100644
index 0000000..189e0ed
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_20NM_H_
+#define UFS_QCOM_PHY_QMP_20NM_H_
+
+#include <linux/phy/phy-qcom-ufs.h>
+
+/* QCOM UFS PHY control registers */
+
+#define COM_OFF(x) (0x000 + x)
+#define PHY_OFF(x) (0xC00 + x)
+#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
+
+/* UFS PHY PLL block registers */
+#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
+#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
+#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
+#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
+#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
+#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
+#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
+#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
+#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
+#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
+#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
+#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
+#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
+#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
+#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
+#define QSERDES_COM_BGTC COM_OFF(0xA0)
+#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
+#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
+#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
+#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
+#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
+#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
+#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
+#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
+#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
+
+/* TX LANE n (0, 1) registers */
+#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
+#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
+#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
+
+/* RX LANE n (0, 1) registers */
+#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
+#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
+#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
+#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
+#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
+#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
+#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
+#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
+#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
+#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
+#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
+#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
+#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
+#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
+#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
+#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
+#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
+#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
+#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
+#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
+#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
+#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
+#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
+#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
+#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
+#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
+#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
+#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
+#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
+#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
+#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
+#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
+#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
+#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
+#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
+#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
+#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
+#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
+#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
+#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
+#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
+#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
+
+#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
+
+/*
+ * This structure represents the 20nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_20nm {
+ struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+};
+
+#endif
diff --git a/drivers/phy/phy-qcom-ufs-qmp-28nm.c
b/drivers/phy/phy-qcom-ufs-qmp-28nm.c
new file mode 100644
index 0000000..21594e1
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-28nm.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include <linux/phy/phy-qcom-ufs.h>
+#include "phy-qcom-ufs-qmp-28nm.h"
+
+#define UFS_PHY_NAME "ufs_qcom_phy_qmp_28nm"
+
+static
+void ufs_qcom_phy_qmp_28nm_power_control(struct ufs_qcom_phy *phy, bool
val)
+{
+ if (val) {
+ writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * Before any transactions involving PHY, ensure PHY knows
+ * that it's analog rail is powered ON. This also ensures
+ * that PHY is out of power collapse before enabling the
+ * SIGDET.
+ */
+ mb();
+ if (phy->quirks &
UFS_QCOM_PHY_DIS_SIGDET_BEFORE_PWR_COLLAPSE) {
+ writel_relaxed(0xC0,
+ phy->mmio + QSERDES_RX_SIGDET_CNTRL(0));
+ writel_relaxed(0xC0,
+ phy->mmio + QSERDES_RX_SIGDET_CNTRL(1));
+ /*
+ * make sure that SIGDET is enabled before
proceeding
+ * further.
+ */
+ mb();
+ }
+ } else {
+ if (phy->quirks &
+ UFS_QCOM_PHY_DIS_SIGDET_BEFORE_PWR_COLLAPSE)
{
+ writel_relaxed(0x0,
+ phy->mmio + QSERDES_RX_SIGDET_CNTRL(0));
+ writel_relaxed(0x0,
+ phy->mmio + QSERDES_RX_SIGDET_CNTRL(1));
+ /*
+ * Ensure that SIGDET is disabled before PHY power
+ * collapse
+ */
+ mb();
+ }
+ writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+ /*
+ * ensure that PHY knows its PHY analog rail is going
+ * to be powered down
+ */
+ mb();
+ }
+}
+
+static
+void ufs_qcom_phy_qmp_28nm_advertise_quirks(struct ufs_qcom_phy
*phy_common)
+{
+ phy_common->quirks = UFS_QCOM_PHY_QUIRK_CFG_RESTORE
+ |
UFS_QCOM_PHY_DIS_SIGDET_BEFORE_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_28nm_init(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy_qmp_28nm *phy = phy_get_drvdata(generic_phy);
+ struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+ int err = 0;
+
+ err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks()
failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+ if (err) {
+ dev_err(phy_common->dev, "%s:
ufs_qcom_phy_init_vregulators() failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ ufs_qcom_phy_qmp_28nm_advertise_quirks(phy_common);
+
+out:
+ return err;
+}
+
+static int ufs_qcom_phy_qmp_28nm_calibrate(struct ufs_qcom_phy
*ufs_qcom_phy)
+{
+ struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
+ int tbl_size_A, tbl_size_B;
+ int rate = UFS_QCOM_LIMIT_HS_RATE;
+ u8 major = ufs_qcom_phy->host_ctrl_rev_major;
+ u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
+ u16 step = ufs_qcom_phy->host_ctrl_rev_step;
+ int err;
+
+ if ((major == 0x1) && (minor == 0x001) && (step == 0x0000)) {
+ tbl_size_A = ARRAY_SIZE(phy_cal_table_ctrl_1_1_0_rate_A);
+ tbl_A = phy_cal_table_ctrl_1_1_0_rate_A;
+ } else if ((major == 0x1) && (minor == 0x001) && (step == 0x0001)) {
+ tbl_size_A = ARRAY_SIZE(phy_cal_table_ctrl_1_1_1_rate_A);
+ tbl_A = phy_cal_table_ctrl_1_1_1_rate_A;
+ } else {
+ tbl_size_A = 0;
+ tbl_A = NULL;
+ }
+
+ tbl_B = phy_cal_table_rate_B;
+ tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+
+ err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
+ tbl_B, tbl_size_B, rate);
+ if (err)
+ dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate()
failed %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static
+u32 ufs_qcom_phy_qmp_28nm_read_attr(struct ufs_qcom_phy *phy_common, u32
attr)
+
+{
+ u32 l0, l1;
+
+ writel_relaxed(attr, phy_common->mmio + UFS_PHY_RMMI_ATTRID);
+ /* Read attribute value for both lanes */
+ writel_relaxed((UFS_PHY_RMMI_CFGRD_L0 | UFS_PHY_RMMI_CFGRD_L1),
+ phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+
+ l0 = readl_relaxed(phy_common->mmio +
UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS);
+ l1 = readl_relaxed(phy_common->mmio +
UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS);
+ /* Both lanes should have the same value for same attribute type */
+ if (unlikely(l0 != l1))
+ dev_warn(phy_common->dev, "%s: attr 0x%x values are not same
for Lane-0 and Lane-1, l0=0x%x, l1=0x%x",
+ __func__, attr, l0, l1);
+
+ /* must clear now */
+ writel_relaxed(0x00, phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+
+ return l0;
+}
+
+static void
+ufs_qcom_phy_qmp_28nm_write_attr(struct ufs_qcom_phy *phy_common,
+ u32 attr, u32 val)
+{
+ writel_relaxed(attr, phy_common->mmio + UFS_PHY_RMMI_ATTRID);
+ writel_relaxed(val, phy_common->mmio + UFS_PHY_RMMI_ATTRWRVAL);
+ /* update attribute for both lanes */
+ writel_relaxed((UFS_PHY_RMMI_CFGWR_L0 | UFS_PHY_RMMI_CFGWR_L1),
+ phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+ if (is_mphy_tx_attr(attr))
+ writel_relaxed((UFS_PHY_RMMI_TX_CFGUPDT_L0 |
+ UFS_PHY_RMMI_TX_CFGUPDT_L1),
+ phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+ else
+ writel_relaxed((UFS_PHY_RMMI_RX_CFGUPDT_L0 |
+ UFS_PHY_RMMI_RX_CFGUPDT_L1),
+ phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+
+ writel_relaxed(0x00, phy_common->mmio + UFS_PHY_RMMI_ATTR_CTRL);
+}
+
+static
+void ufs_qcom_phy_qmp_28nm_save_configuration(struct ufs_qcom_phy
*phy_common)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cached_phy_regs); i++)
+ cached_phy_regs[i].cfg_value =
+ readl_relaxed(phy_common->mmio +
+ cached_phy_regs[i].reg_offset);
+
+ for (i = 0; i < ARRAY_SIZE(cached_phy_attr); i++)
+ cached_phy_attr[i].value =
+ ufs_qcom_phy_qmp_28nm_read_attr(phy_common,
+ cached_phy_attr[i].att);
+}
+
+static void
+ufs_qcom_phy_qmp_28nm_restore_configuration(struct ufs_qcom_phy
*phy_common)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cached_phy_attr); i++)
+ ufs_qcom_phy_qmp_28nm_write_attr(phy_common,
+ cached_phy_attr[i].att, cached_phy_attr[i].value);
+}
+
+static
+void ufs_qcom_phy_qmp_28nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32
val)
+{
+ writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
+ phy->mmio + UFS_PHY_TX_LANE_ENABLE);
+ /*
+ * ensure that TX_LANE_ENABLE_MASK is written to PHY before it
+ * continues
+ */
+ mb();
+}
+
+static inline void ufs_qcom_phy_qmp_28nm_start_serdes(struct ufs_qcom_phy
*phy)
+{
+ u32 tmp;
+
+ tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+ tmp &= ~MASK_SERDES_START;
+ tmp |= (1 << OFFSET_SERDES_START);
+ writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+ /*
+ * ensure that UFS_PHY_PHY_START is written to PHY before before it
+ * continues
+ */
+ mb();
+}
+
+static int ufs_qcom_phy_qmp_28nm_is_pcs_ready(struct ufs_qcom_phy
*phy_common)
+{
+ int err = 0;
+ u32 val;
+
+ err = readl_poll_timeout(phy_common->mmio +
UFS_PHY_PCS_READY_STATUS,
+ val, (val & MASK_PCS_READY), 10, 1000000);
+ if (err)
+ dev_err(phy_common->dev, "%s: phy init failed, %d\n",
+ __func__, err);
+
+ return err;
+}
+
+struct phy_ops ufs_qcom_phy_qmp_28nm_phy_ops = {
+ .init = ufs_qcom_phy_qmp_28nm_init,
+ .exit = ufs_qcom_phy_exit,
+ .power_on = ufs_qcom_phy_power_on,
+ .power_off = ufs_qcom_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+struct ufs_qcom_phy_specific_ops phy_28nm_ops = {
+ .calibrate_phy = ufs_qcom_phy_qmp_28nm_calibrate,
+ .start_serdes = ufs_qcom_phy_qmp_28nm_start_serdes,
+ .save_configuration = ufs_qcom_phy_qmp_28nm_save_configuration,
+ .restore_configuration =
ufs_qcom_phy_qmp_28nm_restore_configuration,
+ .is_physical_coding_sublayer_ready =
ufs_qcom_phy_qmp_28nm_is_pcs_ready,
+ .set_tx_lane_enable = ufs_qcom_phy_qmp_28nm_set_tx_lane_enable,
+ .power_control = ufs_qcom_phy_qmp_28nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_28nm_probe(struct platform_device *pdev)
+{
+ struct ufs_qcom_phy_qmp_28nm *phy;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+ struct phy *generic_phy;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ err = -ENOMEM;
+ dev_err(dev, "%s: failed to allocate phy\n", __func__);
+ goto out;
+ }
+
+ phy->common_cfg.cached_regs =
+ (struct ufs_qcom_phy_calibration *)cached_phy_regs;
+ phy->common_cfg.cached_regs_table_size =
+ ARRAY_SIZE(cached_phy_regs);
+
+ generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+ &ufs_qcom_phy_qmp_28nm_phy_ops,
&phy_28nm_ops);
+
+ if (!generic_phy) {
+ dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+ __func__);
+ err = -EIO;
+ goto out;
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+ sizeof(phy->common_cfg.name));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_phy_qmp_28nm_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = to_phy(dev);
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int err = 0;
+
+ err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+ if (err)
+ dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_28nm_of_match[] = {
+ {.compatible = "qcom,ufs-phy-qmp-28nm"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_28nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_28nm_driver = {
+ .probe = ufs_qcom_phy_qmp_28nm_probe,
+ .remove = ufs_qcom_phy_qmp_28nm_remove,
+ .driver = {
+ .of_match_table = ufs_qcom_phy_qmp_28nm_of_match,
+ .name = "ufs_qcom_phy_qmp_28nm",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_28nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 28nm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-28nm.h
b/drivers/phy/phy-qcom-ufs-qmp-28nm.h
new file mode 100644
index 0000000..b406d99
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-28nm.h
@@ -0,0 +1,738 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_28NM_H_
+#define UFS_QCOM_PHY_QMP_28NM_H_
+
+#include <linux/phy/phy-qcom-ufs.h>
+
+/* QCOM UFS PHY control registers */
+
+#define COM_OFF(x) (0x000 + x)
+#define PHY_OFF(x) (0x700 + x)
+#define TX_OFF(n, x) (0x100 + (0x400 * n) + x)
+#define RX_OFF(n, x) (0x200 + (0x400 * n) + x)
+
+/* UFS PHY PLL block registers */
+#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x00)
+#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
+#define QSERDES_COM_CMN_MODE COM_OFF(0x08)
+#define QSERDES_COM_IE_TRIM COM_OFF(0x0C)
+#define QSERDES_COM_IP_TRIM COM_OFF(0x10)
+#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
+#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x18)
+#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x1C)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x20)
+#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x24)
+#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x28)
+#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x2C)
+#define QSERDES_COM_ATB_SEL1 COM_OFF(0x30)
+#define QSERDES_COM_ATB_SEL2 COM_OFF(0x34)
+#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0x38)
+#define QSERDES_COM_RES_CODE_TXBAND COM_OFF(0x3C)
+#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x40)
+#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x44)
+#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x48)
+#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x4C)
+#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x50)
+#define QSERDES_COM_RES_TRIM_OFFSET COM_OFF(0x54)
+#define QSERDES_COM_BGTC COM_OFF(0x58)
+#define QSERDES_COM_PLL_TEST_UPDN_RESTRIMSTEP COM_OFF(0x5C)
+#define QSERDES_COM_PLL_VCO_TUNE COM_OFF(0x60)
+#define QSERDES_COM_DEC_START1 COM_OFF(0x64)
+#define QSERDES_COM_PLL_AMP_OS COM_OFF(0x68)
+#define QSERDES_COM_SSC_EN_CENTER COM_OFF(0x6C)
+#define QSERDES_COM_SSC_ADJ_PER1 COM_OFF(0x70)
+#define QSERDES_COM_SSC_ADJ_PER2 COM_OFF(0x74)
+#define QSERDES_COM_SSC_PER1 COM_OFF(0x78)
+#define QSERDES_COM_SSC_PER2 COM_OFF(0x7C)
+#define QSERDES_COM_SSC_STEP_SIZE1 COM_OFF(0x80)
+#define QSERDES_COM_SSC_STEP_SIZE2 COM_OFF(0x84)
+#define QSERDES_COM_RES_TRIM_SEARCH COM_OFF(0x88)
+#define QSERDES_COM_RES_TRIM_FREEZE COM_OFF(0x8C)
+#define QSERDES_COM_RES_TRIM_EN_VCOCALDONE COM_OFF(0x90)
+#define QSERDES_COM_FAUX_EN COM_OFF(0x94)
+#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x98)
+#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x9C)
+#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0xA0)
+#define QSERDES_COM_DEC_START2 COM_OFF(0xA4)
+#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0xA8)
+#define QSERDES_COM_PLL_CRCTRL COM_OFF(0xAC)
+#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0xB0)
+#define QSERDES_COM_PLL_FREQUPDATE COM_OFF(0xB4)
+#define QSERDES_COM_PLL_VCO_HIGH COM_OFF(0xB8)
+#define QSERDES_COM_RESET_SM COM_OFF(0xBC)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
+#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
+#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
+#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
+#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
+#define UFS_PHY_TIMER_100US_SYSCLK_STEPS_MSB PHY_OFF(0x18)
+#define UFS_PHY_TIMER_100US_SYSCLK_STEPS_LSB PHY_OFF(0x1C)
+#define UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB PHY_OFF(0x20)
+#define UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB PHY_OFF(0x24)
+#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
+#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
+#define UFS_PHY_CONTROLSYM_ONE_HOT_DISABLE PHY_OFF(0x30)
+#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
+#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
+#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
+#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
+#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
+#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
+#define UFS_PHY_RETIME_BUFFER_EN PHY_OFF(0x4C)
+#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
+#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
+#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
+#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
+#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
+#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
+#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
+#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
+#define UFS_PHY_L0_BIST_CTRL PHY_OFF(0x70)
+#define UFS_PHY_L1_BIST_CTRL PHY_OFF(0x74)
+#define UFS_PHY_BIST_PRBS_POLY0 PHY_OFF(0x78)
+#define UFS_PHY_BIST_PRBS_POLY1 PHY_OFF(0x7C)
+#define UFS_PHY_BIST_PRBS_SEED0 PHY_OFF(0x80)
+#define UFS_PHY_BIST_PRBS_SEED1 PHY_OFF(0x84)
+#define UFS_PHY_BIST_FIXED_PAT_CTRL PHY_OFF(0x88)
+#define UFS_PHY_BIST_FIXED_PAT0_DATA PHY_OFF(0x8C)
+#define UFS_PHY_BIST_FIXED_PAT1_DATA PHY_OFF(0x90)
+#define UFS_PHY_BIST_FIXED_PAT2_DATA PHY_OFF(0x94)
+#define UFS_PHY_BIST_FIXED_PAT3_DATA PHY_OFF(0x98)
+#define UFS_PHY_TX_HSGEAR_CAPABILITY PHY_OFF(0x9C)
+#define UFS_PHY_TX_PWMGEAR_CAPABILITY PHY_OFF(0xA0)
+#define UFS_PHY_TX_AMPLITUDE_CAPABILITY PHY_OFF(0xA4)
+#define UFS_PHY_TX_EXTERNALSYNC_CAPABILITY PHY_OFF(0xA8)
+#define UFS_PHY_TX_HS_UNTERMINATED_LINE_DRIVE_CAPABILITY PHY_OFF(0xAC)
+#define UFS_PHY_TX_LS_TERMINATED_LINE_DRIVE_CAPABILITY PHY_OFF(0xB0)
+#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
+#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
+#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
+#define UFS_PHY_TX_REF_CLOCK_SHARED_CAPABILITY PHY_OFF(0xC0)
+#define UFS_PHY_TX_PHY_MAJORMINOR_RELEASE_CAPABILITY PHY_OFF(0xC4)
+#define UFS_PHY_TX_PHY_EDITORIAL_RELEASE_CAPABILITY PHY_OFF(0xC8)
+#define UFS_PHY_TX_HIBERN8TIME_CAPABILITY PHY_OFF(0xCC)
+#define UFS_PHY_RX_HSGEAR_CAPABILITY PHY_OFF(0xD0)
+#define UFS_PHY_RX_PWMGEAR_CAPABILITY PHY_OFF(0xD4)
+#define UFS_PHY_RX_HS_UNTERMINATED_CAPABILITY PHY_OFF(0xD8)
+#define UFS_PHY_RX_LS_TERMINATED_CAPABILITY PHY_OFF(0xDC)
+#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
+#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
+#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
+#define UFS_PHY_RX_REF_CLOCK_SHARED_CAPABILITY PHY_OFF(0xEC)
+#define UFS_PHY_RX_HS_G1_SYNC_LENGTH_CAPABILITY PHY_OFF(0xF0)
+#define UFS_PHY_RX_HS_G1_PREPARE_LENGTH_CAPABILITY PHY_OFF(0xF4)
+#define UFS_PHY_RX_LS_PREPARE_LENGTH_CAPABILITY PHY_OFF(0xF8)
+#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
+#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
+#define UFS_PHY_RX_PHY_MAJORMINOR_RELEASE_CAPABILITY PHY_OFF(0x104)
+#define UFS_PHY_RX_PHY_EDITORIAL_RELEASE_CAPABILITY PHY_OFF(0x108)
+#define UFS_PHY_RX_HIBERN8TIME_CAPABILITY PHY_OFF(0x10C)
+#define UFS_PHY_RX_HS_G2_SYNC_LENGTH_CAPABILITY PHY_OFF(0x110)
+#define UFS_PHY_RX_HS_G3_SYNC_LENGTH_CAPABILITY PHY_OFF(0x114)
+#define UFS_PHY_RX_HS_G2_PREPARE_LENGTH_CAPABILITY PHY_OFF(0x118)
+#define UFS_PHY_RX_HS_G3_PREPARE_LENGTH_CAPABILITY PHY_OFF(0x11C)
+#define UFS_PHY_DEBUG_BUS_SEL PHY_OFF(0x120)
+#define UFS_PHY_DEBUG_BUS_0_STATUS_CHK PHY_OFF(0x124)
+#define UFS_PHY_DEBUG_BUS_1_STATUS_CHK PHY_OFF(0x128)
+#define UFS_PHY_DEBUG_BUS_2_STATUS_CHK PHY_OFF(0x12C)
+#define UFS_PHY_DEBUG_BUS_3_STATUS_CHK PHY_OFF(0x130)
+#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x134)
+#define UFS_PHY_L0_BIST_CHK_ERR_CNT_L_STATUS PHY_OFF(0x138)
+#define UFS_PHY_L0_BIST_CHK_ERR_CNT_H_STATUS PHY_OFF(0x13C)
+#define UFS_PHY_L1_BIST_CHK_ERR_CNT_L_STATUS PHY_OFF(0x140)
+#define UFS_PHY_L1_BIST_CHK_ERR_CNT_H_STATUS PHY_OFF(0x144)
+#define UFS_PHY_L0_BIST_CHK_STATUS PHY_OFF(0x148)
+#define UFS_PHY_L1_BIST_CHK_STATUS PHY_OFF(0x14C)
+#define UFS_PHY_DEBUG_BUS_0_STATUS PHY_OFF(0x150)
+#define UFS_PHY_DEBUG_BUS_1_STATUS PHY_OFF(0x154)
+#define UFS_PHY_DEBUG_BUS_2_STATUS PHY_OFF(0x158)
+#define UFS_PHY_DEBUG_BUS_3_STATUS PHY_OFF(0x15C)
+#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x16C)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
+#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
+#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
+#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
+#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
+#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x170)
+#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x174)
+#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x178)
+#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x17C)
+
+/* TX LANE n (0, 1) registers */
+#define QSERDES_TX_BIST_MODE_LANENO(n) TX_OFF(n, 0x00)
+#define QSERDES_TX_CLKBUF_ENABLE(n) TX_OFF(n, 0x04)
+#define QSERDES_TX_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
+#define QSERDES_TX_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
+#define QSERDES_TX_RESET_TSYNC_EN(n) TX_OFF(n, 0x10)
+#define QSERDES_TX_LPB_EN(n) TX_OFF(n, 0x14)
+#define QSERDES_TX_RES_CODE(n) TX_OFF(n, 0x18)
+#define QSERDES_TX_PERL_LENGTH1(n) TX_OFF(n, 0x1C)
+#define QSERDES_TX_PERL_LENGTH2(n) TX_OFF(n, 0x20)
+#define QSERDES_TX_SERDES_BYP_EN_OUT(n) TX_OFF(n, 0x24)
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_EN(n) TX_OFF(n, 0x28)
+#define QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN(n) TX_OFF(n, 0x2C)
+#define QSERDES_TX_BIST_PATTERN1(n) TX_OFF(n, 0x30)
+#define QSERDES_TX_BIST_PATTERN2(n) TX_OFF(n, 0x34)
+#define QSERDES_TX_BIST_PATTERN3(n) TX_OFF(n, 0x38)
+#define QSERDES_TX_BIST_PATTERN4(n) TX_OFF(n, 0x3C)
+#define QSERDES_TX_BIST_PATTERN5(n) TX_OFF(n, 0x40)
+#define QSERDES_TX_BIST_PATTERN6(n) TX_OFF(n, 0x44)
+#define QSERDES_TX_BIST_PATTERN7(n) TX_OFF(n, 0x48)
+#define QSERDES_TX_BIST_PATTERN8(n) TX_OFF(n, 0x4C)
+#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x50)
+#define QSERDES_TX_ATB_SEL(n) TX_OFF(n, 0x54)
+#define QSERDES_TX_REC_DETECT_LVL(n) TX_OFF(n, 0x58)
+#define QSERDES_TX_PRBS_SEED1(n) TX_OFF(n, 0x5C)
+#define QSERDES_TX_PRBS_SEED2(n) TX_OFF(n, 0x60)
+#define QSERDES_TX_PRBS_SEED3(n) TX_OFF(n, 0x64)
+#define QSERDES_TX_PRBS_SEED4(n) TX_OFF(n, 0x68)
+#define QSERDES_TX_RESET_GEN(n) TX_OFF(n, 0x6C)
+#define QSERDES_TX_TRAN_DRVR_EMP_EN(n) TX_OFF(n, 0x70)
+#define QSERDES_TX_TX_INTERFACE_MODE(n) TX_OFF(n, 0x74)
+#define QSERDES_TX_BIST_STATUS(n) TX_OFF(n, 0x78)
+#define QSERDES_TX_BIST_ERROR_COUNT1(n) TX_OFF(n, 0x7C)
+#define QSERDES_TX_BIST_ERROR_COUNT2(n) TX_OFF(n, 0x80)
+
+/* RX LANE n (0, 1) registers */
+#define QSERDES_RX_CDR_CONTROL(n) RX_OFF(n, 0x00)
+#define QSERDES_RX_AUX_CONTROL(n) RX_OFF(n, 0x04)
+#define QSERDES_RX_AUX_DATA_TCODE(n) RX_OFF(n, 0x08)
+#define QSERDES_RX_RCLK_AUXDATA_SEL(n) RX_OFF(n, 0x0C)
+#define QSERDES_RX_EQ_CONTROL(n) RX_OFF(n, 0x10)
+#define QSERDES_RX_RX_EQ_GAIN2(n) RX_OFF(n, 0x14)
+#define QSERDES_RX_AC_JTAG_INIT(n) RX_OFF(n, 0x18)
+#define QSERDES_RX_AC_JTAG_LVL_EN(n) RX_OFF(n, 0x1C)
+#define QSERDES_RX_AC_JTAG_MODE(n) RX_OFF(n, 0x20)
+#define QSERDES_RX_AC_JTAG_RESET(n) RX_OFF(n, 0x24)
+#define QSERDES_RX_RX_IQ_RXDET_EN(n) RX_OFF(n, 0x28)
+#define QSERDES_RX_RX_TERM_HIGHZ_CM_AC_COUPLE(n) RX_OFF(n, 0x2C)
+#define QSERDES_RX_RX_EQ_GAIN1(n) RX_OFF(n, 0x30)
+#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x34)
+#define QSERDES_RX_RX_BAND(n) RX_OFF(n, 0x38)
+#define QSERDES_RX_CDR_FREEZE_UP_DN(n) RX_OFF(n, 0x3C)
+#define QSERDES_RX_RX_INTERFACE_MODE(n) RX_OFF(n, 0x40)
+#define QSERDES_RX_JITTER_GEN_MODE(n) RX_OFF(n, 0x44)
+#define QSERDES_RX_BUJ_AMP(n) RX_OFF(n, 0x48)
+#define QSERDES_RX_SJ_AMP1(n) RX_OFF(n, 0x4C)
+#define QSERDES_RX_SJ_AMP2(n) RX_OFF(n, 0x50)
+#define QSERDES_RX_SJ_PER1(n) RX_OFF(n, 0x54)
+#define QSERDES_RX_SJ_PER2(n) RX_OFF(n, 0x58)
+#define QSERDES_RX_BUJ_STEP_FREQ1(n) RX_OFF(n, 0x5C)
+#define QSERDES_RX_BUJ_STEP_FREQ2(n) RX_OFF(n, 0x60)
+#define QSERDES_RX_PPM_OFFSET1(n) RX_OFF(n, 0x64)
+#define QSERDES_RX_PPM_OFFSET2(n) RX_OFF(n, 0x68)
+#define QSERDES_RX_SIGN_PPM_PERIOD1(n) RX_OFF(n, 0x6C)
+#define QSERDES_RX_SIGN_PPM_PERIOD2(n) RX_OFF(n, 0x70)
+#define QSERDES_RX_SSC_CTRL(n) RX_OFF(n, 0x74)
+#define QSERDES_RX_SSC_COUNT1(n) RX_OFF(n, 0x78)
+#define QSERDES_RX_SSC_COUNT2(n) RX_OFF(n, 0x7C)
+#define QSERDES_RX_PWM_CNTRL1(n) RX_OFF(n, 0x80)
+#define QSERDES_RX_PWM_CNTRL2(n) RX_OFF(n, 0x84)
+#define QSERDES_RX_PWM_NDIV(n) RX_OFF(n, 0x88)
+#define QSERDES_RX_SIGDET_CNTRL2(n) RX_OFF(n, 0x8C)
+#define QSERDES_RX_UFS_CNTRL(n) RX_OFF(n, 0x90)
+#define QSERDES_RX_CDR_CONTROL3(n) RX_OFF(n, 0x94)
+#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x98)
+#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0x9C)
+#define QSERDES_RX_CDR_CONTROL_EIGHTH(n) RX_OFF(n, 0xA0)
+#define QSERDES_RX_UCDR_FO_GAIN(n) RX_OFF(n, 0xA4)
+#define QSERDES_RX_UCDR_SO_GAIN(n) RX_OFF(n, 0xA8)
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE(n) RX_OFF(n, 0xAC)
+#define QSERDES_RX_UCDR_FO_TO_SO_DELAY(n) RX_OFF(n, 0xB0)
+#define QSERDES_RX_PI_CTRL1(n) RX_OFF(n, 0xB4)
+#define QSERDES_RX_PI_CTRL2(n) RX_OFF(n, 0xB8)
+#define QSERDES_RX_PI_QUAD(n) RX_OFF(n, 0xBC)
+#define QSERDES_RX_IDATA1(n) RX_OFF(n, 0xC0)
+#define QSERDES_RX_IDATA2(n) RX_OFF(n, 0xC4)
+#define QSERDES_RX_AUX_DATA1(n) RX_OFF(n, 0xC8)
+#define QSERDES_RX_AUX_DATA2(n) RX_OFF(n, 0xCC)
+#define QSERDES_RX_AC_JTAG_OUTP(n) RX_OFF(n, 0xD0)
+#define QSERDES_RX_AC_JTAG_OUTN(n) RX_OFF(n, 0xD4)
+#define QSERDES_RX_RX_SIGDET_PWMDECSTATUS(n) RX_OFF(n, 0xD8)
+
+#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
+
+/*
+ * This structure represents the 28nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_28nm {
+ struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_ctrl_1_1_0_rate_A[] =
{
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xFF),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x24),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x67),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x13),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(0), 0x43),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(1), 0x43),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(0), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x2a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(1), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x2a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(0), 0xC0),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(1), 0xC0),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(0), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(1), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G1_CLK_DIVIDER, 0x50),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G2_CLK_DIVIDER, 0x28),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G3_CLK_DIVIDER, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G4_CLK_DIVIDER, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER, 0xa8),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER, 0x54),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER, 0x2a),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER, 0x15),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_OMC_STATUS_RDVAL, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_LINE_RESET_TIME, 0x1f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_LINE_RESET_GRANULARITY, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TSYNC_RSYNC_CNTL, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PLL_CNTL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x1a),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CFG_CHANGE_CNT_VAL, 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SYNC_WAIT_TIME, 0x30),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY, 0xc8),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1(0), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2(0), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1(1), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2(1), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL3(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL3(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_TRIM_OFFSET, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BGTC, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_AMP_OS, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_DRV_LVL(0), 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_DRV_LVL(1), 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_BIST_MODE_LANENO(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_BIST_MODE_LANENO(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_EMP_POST1_LVL(0), 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_EMP_POST1_LVL(1), 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_EN(0),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_EN(1),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_100US_SYSCLK_STEPS_MSB, 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_100US_SYSCLK_STEPS_LSB, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB, 0x27),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CONTROLSYM_ONE_HOT_DISABLE, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RETIME_BUFFER_EN, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HSGEAR_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_PWMGEAR_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_AMPLITUDE_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_EXTERNALSYNC_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_HS_UNTERMINATED_LINE_DRIVE_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_LS_TERMINATED_LINE_DRIVE_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_REF_CLOCK_SHARED_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HIBERN8TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HSGEAR_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_PWMGEAR_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_UNTERMINATED_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_LS_TERMINATED_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_REF_CLOCK_SHARED_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G1_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_HS_G1_PREPARE_LENGTH_CAPABILITY, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_LS_PREPARE_LENGTH_CAPABILITY,
0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HIBERN8TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G2_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G3_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_HS_G2_PREPARE_LENGTH_CAPABILITY, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_HS_G3_PREPARE_LENGTH_CAPABILITY, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_CLKBUF_ENABLE(0), 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RESET_TSYNC_EN(0), 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RES_CODE(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_SERDES_BYP_EN_OUT(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_REC_DETECT_LVL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN(0),
0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TRAN_DRVR_EMP_EN(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_CONTROL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_DATA_TCODE(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RCLK_AUXDATA_SEL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_EQ_CONTROL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(0), 0x73),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_HIGHZ_CM_AC_COUPLE(0),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_FREEZE_UP_DN(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_EIGHTH(0), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_GAIN(0), 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_GAIN(0), 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE(0), 0x35),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_TO_SO_DELAY(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_CLKBUF_ENABLE(1), 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RESET_TSYNC_EN(1), 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RES_CODE(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_SERDES_BYP_EN_OUT(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_REC_DETECT_LVL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN(1),
0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TRAN_DRVR_EMP_EN(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_CONTROL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_DATA_TCODE(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RCLK_AUXDATA_SEL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_EQ_CONTROL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(1), 0x73),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_HIGHZ_CM_AC_COUPLE(1),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_FREEZE_UP_DN(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_EIGHTH(1), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_GAIN(1), 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_GAIN(1), 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE(1), 0x35),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_TO_SO_DELAY(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_MODE, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_IE_TRIM, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_IP_TRIM, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_IN_SYNC_SEL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_TEST_UPDN_RESTRIMSTEP, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_FAUX_EN, 0x00),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_ctrl_1_1_1_rate_A[] =
{
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0x43),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x24),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(0), 0x43),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(1), 0x43),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(0), 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(1), 0x40),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(0), 0xC0),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(1), 0xC0),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(0), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(1), 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G1_CLK_DIVIDER, 0x30),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G2_CLK_DIVIDER, 0x18),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G3_CLK_DIVIDER, 0x0c),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PWM_G4_CLK_DIVIDER, 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER, 0xa8),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER, 0x54),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER, 0x2a),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER, 0x15),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_OMC_STATUS_RDVAL, 0xff),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_LINE_RESET_TIME, 0x1f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_LINE_RESET_GRANULARITY, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TSYNC_RSYNC_CNTL, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PLL_CNTL, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x1a),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CFG_CHANGE_CNT_VAL, 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SYNC_WAIT_TIME, 0x30),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY, 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY, 0xc8),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1(0), 0x1f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2(0), 0x17),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1(1), 0x1f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2(1), 0x17),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL3(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL3(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_TRIM_OFFSET, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BGTC, 0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_AMP_OS, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_DRV_LVL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_DRV_LVL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_BIST_MODE_LANENO(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_BIST_MODE_LANENO(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_EMP_POST1_LVL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TX_EMP_POST1_LVL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_EN(0),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_EN(1),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_100US_SYSCLK_STEPS_MSB, 0x07),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_100US_SYSCLK_STEPS_LSB, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB, 0x27),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_CONTROLSYM_ONE_HOT_DISABLE, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RETIME_BUFFER_EN, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HSGEAR_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_PWMGEAR_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_AMPLITUDE_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_EXTERNALSYNC_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_HS_UNTERMINATED_LINE_DRIVE_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ UFS_PHY_TX_LS_TERMINATED_LINE_DRIVE_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_REF_CLOCK_SHARED_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HIBERN8TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HSGEAR_CAPABILITY, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_PWMGEAR_CAPABILITY, 0x04),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_UNTERMINATED_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_LS_TERMINATED_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_REF_CLOCK_SHARED_CAPABILITY,
0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G1_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G1_PREPARE_LENGTH_CAPABILITY,
+
0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_LS_PREPARE_LENGTH_CAPABILITY,
0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HIBERN8TIME_CAPABILITY, 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G2_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G3_SYNC_LENGTH_CAPABILITY,
0x48),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G2_PREPARE_LENGTH_CAPABILITY,
+
0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HS_G3_PREPARE_LENGTH_CAPABILITY,
+
0x0f),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_CLKBUF_ENABLE(0), 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RESET_TSYNC_EN(0), 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RES_CODE(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_SERDES_BYP_EN_OUT(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_REC_DETECT_LVL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN(0),
0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TRAN_DRVR_EMP_EN(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_CONTROL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_DATA_TCODE(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RCLK_AUXDATA_SEL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_EQ_CONTROL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(0), 0x51),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_HIGHZ_CM_AC_COUPLE(0),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_FREEZE_UP_DN(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_EIGHTH(0), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_GAIN(0), 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_GAIN(0), 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE(0), 0x35),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_TO_SO_DELAY(0), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_CLKBUF_ENABLE(1), 0x09),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RESET_TSYNC_EN(1), 0x01),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_RES_CODE(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_SERDES_BYP_EN_OUT(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_REC_DETECT_LVL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN(1),
0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_TRAN_DRVR_EMP_EN(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_CONTROL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_AUX_DATA_TCODE(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RCLK_AUXDATA_SEL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_EQ_CONTROL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(1), 0x51),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_HIGHZ_CM_AC_COUPLE(1),
0x05),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_FREEZE_UP_DN(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_EIGHTH(1), 0x22),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_GAIN(1), 0x0a),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_GAIN(1), 0x06),
+ UFS_QCOM_PHY_CAL_ENTRY(
+ QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE(1), 0x35),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FO_TO_SO_DELAY(1), 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_MODE, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_IE_TRIM, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_IP_TRIM, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_IN_SYNC_SEL, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_TEST_UPDN_RESTRIMSTEP, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_FAUX_EN, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x08),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x08),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x10),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1E),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+ UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+};
+
+static struct ufs_qcom_phy_calibration cached_phy_regs[] = {
+ {QSERDES_COM_PLL_CRCTRL},
+ {QSERDES_COM_PLL_CNTRL},
+ {QSERDES_COM_SYSCLK_EN_SEL},
+ {QSERDES_COM_SYS_CLK_CTRL},
+ {QSERDES_COM_PLL_CLKEPDIV},
+ {QSERDES_COM_DEC_START1},
+ {QSERDES_COM_DEC_START2},
+ {QSERDES_COM_DIV_FRAC_START1},
+ {QSERDES_COM_DIV_FRAC_START2},
+ {QSERDES_COM_DIV_FRAC_START3},
+ {QSERDES_COM_PLLLOCK_CMP1},
+ {QSERDES_COM_PLLLOCK_CMP2},
+ {QSERDES_COM_PLLLOCK_CMP3},
+ {QSERDES_COM_PLLLOCK_CMP_EN},
+ {QSERDES_COM_RESETSM_CNTRL},
+ {QSERDES_COM_PLL_RXTXEPCLK_EN},
+ {QSERDES_RX_PWM_CNTRL1(0)},
+ {QSERDES_RX_PWM_CNTRL1(1)},
+ {QSERDES_RX_CDR_CONTROL(0)},
+ {QSERDES_RX_CDR_CONTROL_HALF(0)},
+ {QSERDES_RX_CDR_CONTROL_QUARTER(0)},
+ {QSERDES_RX_CDR_CONTROL(1)},
+ {QSERDES_RX_CDR_CONTROL_HALF(1)},
+ {QSERDES_RX_CDR_CONTROL_QUARTER(1)},
+ {QSERDES_RX_SIGDET_CNTRL(0)},
+ {QSERDES_RX_SIGDET_CNTRL(1)},
+ {QSERDES_RX_SIGDET_CNTRL2(0)},
+ {QSERDES_RX_SIGDET_CNTRL2(1)},
+ {QSERDES_RX_RX_EQ_GAIN1(0)},
+ {QSERDES_RX_RX_EQ_GAIN2(0)},
+ {QSERDES_RX_RX_EQ_GAIN1(1)},
+ {QSERDES_RX_RX_EQ_GAIN2(1)},
+ {QSERDES_COM_PLL_IP_SETI},
+ {QSERDES_COM_PLL_CP_SETI},
+ {QSERDES_COM_PLL_IP_SETP},
+ {QSERDES_COM_PLL_CP_SETP},
+ {UFS_PHY_PWM_G1_CLK_DIVIDER},
+ {UFS_PHY_PWM_G2_CLK_DIVIDER},
+ {UFS_PHY_PWM_G3_CLK_DIVIDER},
+ {UFS_PHY_PWM_G4_CLK_DIVIDER},
+ {UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER},
+ {UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER},
+ {UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER},
+ {UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER},
+ {UFS_PHY_OMC_STATUS_RDVAL},
+ {UFS_PHY_LINE_RESET_TIME},
+ {UFS_PHY_LINE_RESET_GRANULARITY},
+ {UFS_PHY_TSYNC_RSYNC_CNTL},
+ {UFS_PHY_PLL_CNTL},
+ {UFS_PHY_TX_LARGE_AMP_DRV_LVL},
+ {UFS_PHY_TX_SMALL_AMP_DRV_LVL},
+ {UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL},
+ {UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL},
+ {UFS_PHY_CFG_CHANGE_CNT_VAL},
+ {UFS_PHY_RX_SYNC_WAIT_TIME},
+ {UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY},
+ {UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY},
+ {UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY},
+ {UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY},
+ {UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY},
+ {UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY},
+ {UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY},
+ {UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY},
+ {QSERDES_RX_CDR_CONTROL3(0)},
+ {QSERDES_RX_CDR_CONTROL3(1)},
+ {QSERDES_COM_RES_TRIM_OFFSET},
+ {QSERDES_COM_BGTC},
+ {QSERDES_COM_PLL_AMP_OS},
+};
+
+static struct ufs_qcom_phy_stored_attributes cached_phy_attr[] = {
+ {TX_MODE},
+ {TX_HSRATE_SERIES},
+ {TX_HSGEAR},
+ {TX_PWMGEAR},
+ {TX_AMPLITUDE},
+ {TX_HS_SLEWRATE},
+ {TX_SYNC_SOURCE},
+ {TX_HS_PREPARE_LENGTH},
+ {TX_LS_PREPARE_LENGTH},
+ {TX_LCC_ENABLE},
+ {TX_PWM_BURST_CLOSURE_EXTENSION},
+ {TX_BYPASS_8B10B_ENABLE},
+ {TX_DRIVER_POLARITY},
+ {TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE},
+ {TX_LS_TERMINATED_LINE_DRIVE_ENABLE},
+ {TX_LCC_SEQUENCER},
+ {TX_MIN_ACTIVATETIME},
+ {TX_PWM_G6_G7_SYNC_LENGTH},
+ {RX_MODE},
+ {RX_HSRATE_SERIES},
+ {RX_HSGEAR},
+ {RX_PWMGEAR},
+ {RX_LS_TERMINATED_ENABLE},
+ {RX_HS_UNTERMINATED_ENABLE},
+ {RX_ENTER_HIBERN8},
+ {RX_BYPASS_8B10B_ENABLE},
+ {RX_TERMINATION_FORCE_ENABLE},
+};
+
+#endif
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
new file mode 100644
index 0000000..48af90f
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -0,0 +1,661 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/phy/phy-qcom-ufs.h>
+
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ struct ufs_qcom_phy_calibration *tbl_A,
+ int tbl_size_A,
+ struct ufs_qcom_phy_calibration *tbl_B,
+ int tbl_size_B, int rate)
+{
+ int i;
+ int ret = 0;
+
+ if (!tbl_A) {
+ dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
+ ret = EINVAL;
+ goto out;
+ }
+
+ for (i = 0; i < tbl_size_A; i++)
+ writel_relaxed(tbl_A[i].cfg_value,
+ ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
+
+ /*
+ * In case we would like to work in rate B, we need
+ * to override a registers that were configured in rate A table
+ * with registers of rate B table.
+ * table.
+ */
+ if (rate == PA_HS_MODE_B) {
+ if (!tbl_B) {
+ dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
+ __func__);
+ ret = EINVAL;
+ goto out;
+ }
+
+ for (i = 0; i < tbl_size_B; i++)
+ writel_relaxed(tbl_B[i].cfg_value,
+ ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
+ }
+
+ /* flush buffered writes */
+ mb();
+
+out:
+ return ret;
+}
+
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+ struct ufs_qcom_phy *common_cfg,
+ struct phy_ops *ufs_qcom_phy_gen_ops,
+ struct ufs_qcom_phy_specific_ops
*phy_spec_ops)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy = NULL;
+ struct phy_provider *phy_provider;
+
+ err = ufs_qcom_phy_base_init(pdev, common_cfg);
+ if (err) {
+ dev_err(dev, "%s: phy base init failed %d\n", __func__,
err);
+ goto out;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev,
of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ err = PTR_ERR(phy_provider);
+ dev_err(dev, "%s: failed to register phy %d\n", __func__,
err);
+ goto out;
+ }
+
+ generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops,
NULL);
+ if (IS_ERR(generic_phy)) {
+ err = PTR_ERR(generic_phy);
+ dev_err(dev, "%s: failed to create phy %d\n", __func__,
err);
+ goto out;
+ }
+
+ common_cfg->phy_spec_ops = phy_spec_ops;
+ common_cfg->dev = dev;
+
+out:
+ return generic_phy;
+}
+
+/*
+ * This assumes the embedded phy structure inside generic_phy is of type
+ * struct ufs_qcom_phy. In order to function properly it's crucial
+ * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
+ * as the first inside generic_phy.
+ */
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
+{
+ return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
+}
+
+int ufs_qcom_phy_base_init(struct platform_device *pdev,
+ struct ufs_qcom_phy *phy_common)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int err = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "%s: platform_get_resource() failed. returned
NULL\n",
+ __func__);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ phy_common->mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy_common->mmio)) {
+ err = PTR_ERR(phy_common->mmio);
+ dev_err(dev, "ioremap resource failed %d\n", err);
+ }
+
+out:
+ return err;
+}
+
+int ufs_qcom_phy_clk_get(struct phy *phy,
+ const char *name, struct clk **clk_out)
+{
+ struct clk *clk;
+ int err = 0;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ dev_err(dev, "failed to get %s err %d", name, err);
+ } else {
+ *clk_out = clk;
+ }
+
+ return err;
+}
+
+int
+ufs_qcom_phy_init_clks(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common)
+{
+ int err;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk",
+ &phy_common->tx_iface_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk",
+ &phy_common->rx_iface_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src",
+ &phy_common->ref_clk_src);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent",
+ &phy_common->ref_clk_parent);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk",
+ &phy_common->ref_clk);
+
+out:
+ return err;
+}
+
+int
+ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common)
+{
+ int err;
+
+ err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll,
+ "vdda-pll");
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy,
+ "vdda-phy");
+out:
+ return err;
+}
+
+int ufs_qcom_phy_init_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, const char *name)
+{
+ int err = 0;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ char prop_name[MAX_PROP_NAME];
+
+ vreg->name = kstrdup(name, GFP_KERNEL);
+ if (!vreg->name) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ vreg->reg = devm_regulator_get(dev, name);
+ if (IS_ERR(vreg->reg)) {
+ err = PTR_ERR(vreg->reg);
+ dev_err(dev, "failed to get %s, %d\n", name, err);
+ goto out;
+ }
+
+ if (dev->of_node) {
+ snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
+ err = of_property_read_u32(dev->of_node,
+ prop_name, &vreg->max_uA);
+ if (err && err != -EINVAL) {
+ dev_err(dev, "%s: failed to read %s\n",
+ __func__, prop_name);
+ goto out;
+ } else if (err == -EINVAL || !vreg->max_uA) {
+ if (regulator_count_voltages(vreg->reg) > 0) {
+ dev_err(dev, "%s: %s is mandatory\n",
+ __func__, prop_name);
+ goto out;
+ }
+ err = 0;
+ }
+ }
+
+ if (!strcmp(name, "vdda-pll")) {
+ vreg->max_uV = VDDA_PLL_MAX_UV;
+ vreg->min_uV = VDDA_PLL_MIN_UV;
+ } else if (!strcmp(name, "vdda-phy")) {
+ vreg->max_uV = VDDA_PHY_MAX_UV;
+ vreg->min_uV = VDDA_PHY_MIN_UV;
+ }
+
+out:
+ if (err)
+ kfree(vreg->name);
+ return err;
+}
+
+int ufs_qcom_phy_cfg_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, bool on)
+{
+ int ret = 0;
+ struct regulator *reg = vreg->reg;
+ const char *name = vreg->name;
+ int min_uV;
+ int uA_load;
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+
+ BUG_ON(!vreg);
+
+ if (regulator_count_voltages(reg) > 0) {
+ min_uV = on ? vreg->min_uV : 0;
+ ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
+ if (ret) {
+ dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+ __func__, name, ret);
+ goto out;
+ }
+ uA_load = on ? vreg->max_uA : 0;
+ ret = regulator_set_optimum_mode(reg, uA_load);
+ if (ret >= 0) {
+ /*
+ * regulator_set_optimum_mode() returns new
regulator
+ * mode upon success.
+ */
+ ret = 0;
+ } else {
+ dev_err(dev, "%s: %s set optimum mode(uA_load=%d)
failed, err=%d\n",
+ __func__, name, uA_load, ret);
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+int ufs_qcom_phy_enable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+ int ret = 0;
+
+ if (!vreg || vreg->enabled)
+ goto out;
+
+ ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true);
+ if (ret) {
+ dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = regulator_enable(vreg->reg);
+ if (ret) {
+ dev_err(dev, "%s: enable failed, err=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ vreg->enabled = true;
+out:
+ return ret;
+}
+
+int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
+{
+ int ret = 0;
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_ref_clk_enabled)
+ goto out;
+
+ /*
+ * reference clock is propagated in a daisy-chained manner from
+ * source to phy, so ungate them at each stage.
+ */
+ ret = clk_prepare_enable(phy->ref_clk_src);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(phy->ref_clk_parent);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
+ __func__, ret);
+ goto out_disable_src;
+ }
+
+ ret = clk_prepare_enable(phy->ref_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
+ __func__, ret);
+ goto out_disable_parent;
+ }
+
+ phy->is_ref_clk_enabled = true;
+ goto out;
+
+out_disable_parent:
+ clk_disable_unprepare(phy->ref_clk_parent);
+out_disable_src:
+ clk_disable_unprepare(phy->ref_clk_src);
+out:
+ return ret;
+}
+
+int ufs_qcom_phy_disable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+ struct device *dev = ufs_qcom_phy->dev;
+ int ret = 0;
+
+ if (!vreg || !vreg->enabled)
+ goto out;
+
+ ret = regulator_disable(vreg->reg);
+
+ if (!ret) {
+ /* ignore errors on applying disable config */
+ ufs_qcom_phy_cfg_vreg(phy, vreg, false);
+ vreg->enabled = false;
+ } else {
+ dev_err(dev, "%s: %s disable failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_ref_clk_enabled) {
+ clk_disable_unprepare(phy->ref_clk);
+ clk_disable_unprepare(phy->ref_clk_parent);
+ clk_disable_unprepare(phy->ref_clk_src);
+ phy->is_ref_clk_enabled = false;
+ }
+}
+
+void ufs_qcom_phy_restore_swi_regs(struct phy *generic_phy)
+{
+ int i;
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ for (i = 0; i < phy->cached_regs_table_size; i++) {
+ struct ufs_qcom_phy_calibration *table =
+ (struct ufs_qcom_phy_calibration *)phy->cached_regs;
+ writel_relaxed(table[i].cfg_value, phy->mmio +
+ table[i].reg_offset);
+ }
+
+ /* flush buffered writes */
+ mb();
+}
+
+/* Turn ON M-PHY RMMI interface clocks */
+int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (phy->is_iface_clk_enabled)
+ goto out;
+
+ ret = clk_prepare_enable(phy->tx_iface_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
+ __func__, ret);
+ goto out;
+ }
+ ret = clk_prepare_enable(phy->rx_iface_clk);
+ if (ret) {
+ clk_disable_unprepare(phy->tx_iface_clk);
+ dev_err(phy->dev, "%s: rx_iface_clk enable failed %d.
disabling also tx_iface_clk\n",
+ __func__, ret);
+ goto out;
+ }
+ phy->is_iface_clk_enabled = true;
+
+out:
+ return ret;
+}
+
+/* Turn OFF M-PHY RMMI interface clocks */
+void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+ if (phy->is_iface_clk_enabled) {
+ clk_disable_unprepare(phy->tx_iface_clk);
+ clk_disable_unprepare(phy->rx_iface_clk);
+ phy->is_iface_clk_enabled = false;
+ }
+}
+
+int ufs_qcom_phy_is_cfg_restore_quirk_enabled(struct phy *phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+
+ return ufs_qcom_phy->quirks & UFS_QCOM_PHY_QUIRK_CFG_RESTORE;
+}
+
+int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
+ dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is
not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
+ dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable()
callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
+ tx_lanes);
+ }
+
+ return ret;
+}
+
+void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
+ u8 major, u16 minor, u16 step)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ ufs_qcom_phy->host_ctrl_rev_major = major;
+ ufs_qcom_phy->host_ctrl_rev_minor = minor;
+ ufs_qcom_phy->host_ctrl_rev_step = step;
+}
+
+int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
+ dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is
not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+ ret = ufs_qcom_phy->phy_spec_ops->
+ calibrate_phy(ufs_qcom_phy);
+ if (ret)
+ dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy()
failed %d\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+ struct ufs_qcom_phy *ufs_qcom_phy)
+{
+ phy_power_off(generic_phy);
+
+ kfree(ufs_qcom_phy->vdda_pll.name);
+ kfree(ufs_qcom_phy->vdda_phy.name);
+
+ return 0;
+}
+
+int ufs_qcom_phy_exit(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ if (ufs_qcom_phy->is_powered_on)
+ phy_power_off(generic_phy);
+
+ return 0;
+}
+
+int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+ if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready)
{
+ dev_err(ufs_qcom_phy->dev, "%s:
is_physical_coding_sublayer_ready() callback is not supported\n",
+ __func__);
+ return -ENOTSUPP;
+ }
+
+ return ufs_qcom_phy->phy_spec_ops->
+ is_physical_coding_sublayer_ready(ufs_qcom_phy);
+}
+
+int ufs_qcom_phy_save_configuration(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->save_configuration) {
+ dev_err(ufs_qcom_phy->dev, "%s: save_configuration()
callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+
ufs_qcom_phy->phy_spec_ops->save_configuration(ufs_qcom_phy);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_restore_configuration(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+ int ret = 0;
+
+ if (!ufs_qcom_phy->phy_spec_ops->restore_configuration) {
+ dev_err(ufs_qcom_phy->dev, "%s: restore_configuration()
callback is not supported\n",
+ __func__);
+ ret = -ENOTSUPP;
+ } else {
+
ufs_qcom_phy->phy_spec_ops->restore_configuration(ufs_qcom_phy);
+ }
+
+ return ret;
+}
+
+int ufs_qcom_phy_power_on(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ struct device *dev = phy_common->dev;
+ int err;
+
+ err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy);
+ if (err) {
+ dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
+ __func__, err);
+ goto out;
+ }
+
+ phy_common->phy_spec_ops->power_control(phy_common, true);
+
+ /* vdda_pll also enables ref clock LDOs so enable it first */
+ err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll);
+ if (err) {
+ dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
+ __func__, err);
+ goto out_disable_phy;
+ }
+
+ err = ufs_qcom_phy_enable_ref_clk(generic_phy);
+ if (err) {
+ dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
+ __func__, err);
+ goto out_disable_pll;
+ }
+
+ phy_common->is_powered_on = true;
+ goto out;
+
+out_disable_pll:
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+out_disable_phy:
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+out:
+ return err;
+}
+
+int ufs_qcom_phy_power_off(struct phy *generic_phy)
+{
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+ phy_common->phy_spec_ops->power_control(phy_common, false);
+
+ ufs_qcom_phy_disable_ref_clk(generic_phy);
+
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+ ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+ phy_common->is_powered_on = false;
+
+ return 0;
+}
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 6e07b2a..b7e426e 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -70,3 +70,15 @@ config SCSI_UFSHCD_PLATFORM
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config SCSI_UFS_QCOM
+ bool "QCOM specific hooks to UFS controller platform driver"
+ depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
+ help
+ This selects the QCOM specific additions to UFSHCD platform
driver.
+ UFS host on QCOM needs some vendor specific configuration before
+ accessing the hardware which includes PHY configuration and vendor
+ specific registers.
+
+ Select this if you have UFS controller on QCOM chipset.
+ If unsure, say N.
\ No newline at end of file
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 1e5bd48..8303bcc 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,5 @@
# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
new file mode 100644
index 0000000..47e55e8
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -0,0 +1,866 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/scsi/ufs/ufshcd.h>
+#include <linux/scsi/ufs/ufs-qcom.h>
+#include <linux/phy/phy-qcom-ufs.h>
+#include "ufshci.h"
+
+static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32
*tx_lanes)
+{
+ int err = 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES
%d\n",
+ __func__, err);
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_get(struct device *dev,
+ const char *name, struct clk **clk_out)
+{
+ struct clk *clk;
+ int err = 0;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ dev_err(dev, "%s: failed to get %s err %d",
+ __func__, name, err);
+ } else {
+ *clk_out = clk;
+ }
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_enable(struct device *dev,
+ const char *name, struct clk *clk)
+{
+ int err = 0;
+
+ err = clk_prepare_enable(clk);
+ if (err)
+ dev_err(dev, "%s: %s enable failed %d\n", __func__, name,
err);
+
+ return err;
+}
+
+static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
+{
+ if (!host->is_lane_clks_enabled)
+ return;
+
+ clk_disable_unprepare(host->tx_l1_sync_clk);
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+
+ host->is_lane_clks_enabled = false;
+}
+
+static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ if (host->is_lane_clks_enabled)
+ return 0;
+
+ err = ufs_qcom_host_clk_enable(dev,
+ "rx_lane0_sync_clk", host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_enable(dev,
+ "rx_lane1_sync_clk", host->rx_l1_sync_clk);
+ if (err)
+ goto disable_rx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev,
+ "tx_lane0_sync_clk", host->tx_l0_sync_clk);
+ if (err)
+ goto disable_rx_l1;
+
+ err = ufs_qcom_host_clk_enable(dev,
+ "tx_lane1_sync_clk", host->tx_l1_sync_clk);
+ if (err)
+ goto disable_tx_l0;
+
+ host->is_lane_clks_enabled = true;
+ goto out;
+
+disable_tx_l0:
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+disable_rx_l1:
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+disable_rx_l0:
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "rx_lane0_sync_clk", &host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "rx_lane1_sync_clk", &host->rx_l1_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "tx_lane0_sync_clk", &host->tx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "tx_lane1_sync_clk", &host->tx_l1_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ u32 tx_lanes;
+ int err = 0;
+
+ err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable
failed\n",
+ __func__);
+
+out:
+ return err;
+}
+
+static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
+{
+ int err;
+ u32 tx_fsm_val = 0;
+ unsigned long timeout = jiffies +
msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ if (err || tx_fsm_val == TX_FSM_HIBERN8)
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout))
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(MPHY_TX_FSM_STATE),
&tx_fsm_val);
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err
%d\n",
+ __func__, err);
+ } else if (tx_fsm_val != TX_FSM_HIBERN8) {
+ err = tx_fsm_val;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
+ __func__, err);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+ u8 major;
+ u16 minor, step;
+
+ /* Assert PHY reset and apply PHY calibration values */
+ ufs_qcom_assert_reset(hba);
+ /* provide 1ms delay to let the reset pulse propagate */
+ usleep_range(1000, 1100);
+
+ ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+ ufs_qcom_phy_save_controller_version(phy, major, minor, step);
+ ret = ufs_qcom_phy_calibrate_phy(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed,
ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /* De-assert PHY reset and start serdes */
+ ufs_qcom_deassert_reset(hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+ ret = ufs_qcom_phy_start_serdes(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed,
ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = ufs_qcom_phy_is_pcs_ready(phy);
+ if (ret)
+ dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready()
failed, ret = %d\n",
+ __func__, ret);
+
+out:
+ return ret;
+}
+
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_power_up_sequence(hba);
+ /*
+ * The PHY PLL output is the source of tx/rx lane symbol
+ * clocks, hence, enable the lane clocks only after PHY
+ * is initialized.
+ */
+ err = ufs_qcom_enable_lane_clks(host);
+ break;
+ case POST_CHANGE:
+ /* check if UFS PHY moved from DISABLED to HIBERN8 */
+ err = ufs_qcom_check_hibern8(hba);
+ break;
+ default:
+ dev_err(hba->dev, "%s: invalid status %d\n", __func__,
status);
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+/**
+ * Returns non-zero for success (which rate of core_clk) and 0
+ * in case of a failure
+ */
+static unsigned long
+ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+{
+ struct ufs_clk_info *clki;
+ u32 core_clk_period_in_ns;
+ u32 tx_clk_cycles_per_us = 0;
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_us = 0;
+
+ static u32 pwm_fr_table[][2] = {
+ {UFS_PWM_G1, 0x1},
+ {UFS_PWM_G2, 0x1},
+ {UFS_PWM_G3, 0x1},
+ {UFS_PWM_G4, 0x1},
+ };
+
+ static u32 hs_fr_table_rA[][2] = {
+ {UFS_HS_G1, 0x1F},
+ {UFS_HS_G2, 0x3e},
+ };
+
+ static u32 hs_fr_table_rB[][2] = {
+ {UFS_HS_G1, 0x24},
+ {UFS_HS_G2, 0x49},
+ };
+
+ if (gear == 0) {
+ dev_err(hba->dev, "%s: invalid gear = %d\n", __func__,
gear);
+ goto out_error;
+ }
+
+ list_for_each_entry(clki, &hba->clk_list_head, list) {
+ if (!strcmp(clki->name, "core_clk"))
+ core_clk_rate = clk_get_rate(clki->clk);
+ }
+
+ /* If frequency is smaller than 1MHz, set to 1MHz */
+ if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
+ core_clk_rate = DEFAULT_CLK_RATE_HZ;
+
+ core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+
+ core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
+ core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
+ core_clk_period_in_ns &= MASK_CLK_NS_REG;
+
+ switch (hs) {
+ case FASTAUTO_MODE:
+ case FAST_MODE:
+ if (rate == PA_HS_MODE_A) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size
%zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rA));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
+ } else if (rate == PA_HS_MODE_B) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size
%zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rB));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
+ } else {
+ dev_err(hba->dev, "%s: invalid rate = %d\n",
+ __func__, rate);
+ goto out_error;
+ }
+ break;
+ case SLOWAUTO_MODE:
+ case SLOW_MODE:
+ if (gear > ARRAY_SIZE(pwm_fr_table)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size
%zu\n",
+ __func__, gear,
+ ARRAY_SIZE(pwm_fr_table));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
+ break;
+ case UNCHANGED:
+ default:
+ dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
+ goto out_error;
+ }
+
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+
REG_UFS_TX_SYMBOL_CLK_NS_US);
+ goto out;
+
+out_error:
+ core_clk_rate = 0;
+out:
+ return core_clk_rate;
+}
+
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+{
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_100ms;
+
+ switch (status) {
+ case PRE_CHANGE:
+ core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
+ SLOWAUTO_MODE, 0);
+ if (!core_clk_rate) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers()
failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ core_clk_cycles_per_100ms =
+ (core_clk_rate / MSEC_PER_SEC) * 100;
+ ufshcd_writel(hba, core_clk_cycles_per_100ms,
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ break;
+ case POST_CHANGE:
+ ufs_qcom_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+
+ if (ufs_qcom_is_link_off(hba)) {
+ /*
+ * Disable the tx/rx lane symbol clocks before PHY is
+ * powered down as the PLL source should be disabled
+ * after downstream clocks are disabled.
+ */
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(phy);
+
+ goto out;
+ }
+
+ /*
+ * If UniPro link is not active, PHY ref_clk, main PHY analog power
+ * rail and low noise analog power rail for PLL can be switched off.
+ */
+ if (!ufs_qcom_is_link_active(hba)) {
+ if (ufs_qcom_phy_is_cfg_restore_quirk_enabled(phy) &&
+ ufs_qcom_is_link_hibern8(hba)) {
+ ret = ufs_qcom_phy_save_configuration(phy);
+ if (ret)
+ dev_err(hba->dev, "%s: failed
ufs_qcom_phy_save_configuration %d\n",
+ __func__, ret);
+ }
+ phy_power_off(phy);
+ }
+
+out:
+ return ret;
+}
+
+static bool ufs_qcom_is_phy_config_restore_required(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+
+ return ufs_qcom_phy_is_cfg_restore_quirk_enabled(phy)
+ && ufshcd_is_link_hibern8(hba)
+ && hba->is_sys_suspended;
+}
+
+static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ int err;
+
+ if (ufs_qcom_is_phy_config_restore_required(hba)) {
+ ufs_qcom_assert_reset(hba);
+ /* provide 1ms delay to let the reset pulse propagate */
+ usleep_range(1000, 1100);
+ }
+
+ err = phy_power_on(phy);
+ if (err) {
+ dev_err(hba->dev, "%s: failed enabling regs, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ if (ufs_qcom_is_phy_config_restore_required(hba)) {
+ ufs_qcom_phy_restore_swi_regs(phy);
+
+ /* De-assert PHY reset and start serdes */
+ ufs_qcom_deassert_reset(hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+
+ err = ufs_qcom_phy_start_serdes(phy);
+ if (err) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes()
failed, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_restore_configuration(phy);
+ if (err) {
+ dev_err(hba->dev, "%s:
ufs_qcom_phy_restore_configuration() failed, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_phy_is_pcs_ready(phy);
+ if (err) {
+ dev_err(hba->dev, "%s:
is_physical_coding_sublayer_ready() failed, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+ }
+
+ hba->is_sys_suspended = false;
+out:
+ return err;
+}
+
+struct ufs_qcom_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params
*qcom_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_qcom_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_qcom_max_hs = false;
+
+ if (dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (qcom_param->desired_working_mode == FAST) {
+ is_qcom_max_hs = true;
+ min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
+ qcom_param->hs_tx_gear);
+ } else {
+ min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
+ qcom_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but qcom_param->desired_working_mode is
+ * HS, thus device and qcom_param don't agree
+ */
+ if (!is_dev_sup_hs && is_qcom_max_hs) {
+ pr_err("%s: failed to agree on power mode (device doesn't
support HS but requested power is HS)\n",
+ __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_qcom_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since qcom_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to qcom_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_hs;
+ } else {
+ /*
+ * here qcom_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases qcom_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+ qcom_param->tx_lanes);
+ agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+ qcom_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears
*/
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences
are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to
decide
+ * what is the gear, as it is the one that also decided previously
what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_qcom_max_hs) ||
+ (!is_dev_sup_hs && !is_qcom_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_qcom_gear);
+ else if (!is_dev_sup_hs)
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
+
+ agreed_pwr->hs_rate = qcom_param->hs_rate;
+ return 0;
+}
+
+static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
+ bool status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ u32 val;
+ struct ufs_qcom_host *host = hba->priv;
+ struct phy *phy = host->generic_phy;
+ struct ufs_qcom_dev_params ufs_qcom_cap;
+ int ret = 0;
+ int res = 0;
+
+ if (!dev_req_params) {
+ pr_err("%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX;
+ ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX;
+ ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX;
+ ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX;
+ ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX;
+ ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX;
+ ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM;
+ ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM;
+ ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS;
+ ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS;
+ ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+ ufs_qcom_cap.desired_working_mode =
+ UFS_QCOM_LIMIT_DESIRED_MODE;
+
+ ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
+ dev_max_params,
+ dev_req_params);
+ if (ret) {
+ pr_err("%s: failed to determine capabilities\n",
+ __func__);
+ goto out;
+ }
+
+ break;
+ case POST_CHANGE:
+ if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers()
failed\n",
+ __func__);
+ /*
+ * we return error code at the end of the routine,
+ * but continue to configure UFS_PHY_TX_LANE_ENABLE
+ * and bus voting as usual
+ */
+ ret = -EINVAL;
+ }
+
+ val = ~(MAX_U32 << dev_req_params->lane_tx);
+ res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
+ if (res) {
+ dev_err(hba->dev, "%s:
ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
+ __func__, res);
+ ret = res;
+ }
+
+ /* cache the power mode parameters to use internally */
+ memcpy(&host->dev_req_params,
+ dev_req_params, sizeof(*dev_req_params));
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+/**
+ * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller
quirks
+ * @hba: host controller instance
+ *
+ * QCOM UFS host controller might have some non standard behaviours
(quirks)
+ * than what is specified by UFSHCI specification. Advertise all such
+ * quirks to standard UFS host controller driver so standard takes them
into
+ * account.
+ */
+static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
+{
+ u8 major;
+ u16 minor, step;
+
+ ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+
+ if ((major == 0x1) && (minor == 0x001) && (step == 0x0001))
+ hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_BROKEN_INTR_AGGR
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
+ | UFSHCD_QUIRK_BROKEN_LCC);
+ else if ((major == 0x1) && (minor == 0x002) && (step == 0x0000))
+ hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
+ | UFSHCD_QUIRK_BROKEN_LCC);
+}
+
+static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ int err = 0;
+ int vote = 0;
+
+ /*
+ * In case ufs_qcom_init() is not yet done, simply ignore.
+ * This ufs_qcom_setup_clocks() shall be called from
+ * ufs_qcom_init() after init is done.
+ */
+ if (!host)
+ return 0;
+
+ if (on) {
+ err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
+ if (err)
+ goto out;
+
+ vote = host->bus_vote.saved_vote;
+ } else {
+ /* M-PHY RMMI interface clocks can be turned off */
+ ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+ vote = host->bus_vote.min_bw_vote;
+ }
+
+out:
+ return err;
+}
+
+#define ANDROID_BOOT_DEV_MAX 30
+static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
+static int get_android_boot_dev(char *str)
+{
+ strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
+ return 1;
+}
+__setup("androidboot.bootdevice=", get_android_boot_dev);
+
+/**
+ * ufs_qcom_init - bind phy with controller
+ * @hba: host controller instance
+ *
+ * Binds PHY with controller and powers up PHY enabling clocks
+ * and regulators.
+ *
+ * Returns -EPROBE_DEFER if binding fails, returns negative error
+ * on phy power up failure and returns zero on success.
+ */
+static int ufs_qcom_init(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct ufs_qcom_host *host;
+
+ if (strlen(android_boot_dev) && strcmp(android_boot_dev,
dev_name(dev)))
+ return -ENODEV;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ err = -ENOMEM;
+ dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
+ goto out;
+ }
+
+ host->hba = hba;
+ host->generic_phy = devm_phy_get(dev, "ufsphy");
+
+ if (IS_ERR(host->generic_phy)) {
+ err = PTR_ERR(host->generic_phy);
+ dev_err(dev, "PHY get failed %d\n", err);
+ goto out;
+ }
+
+ hba->priv = (void *)host;
+
+ phy_init(host->generic_phy);
+ err = phy_power_on(host->generic_phy);
+ if (err)
+ goto out_phy_exit;
+
+ err = ufs_qcom_init_lane_clks(host);
+ if (err)
+ goto out_disable_phy;
+
+ ufs_qcom_advertise_quirks(hba);
+
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+ hba->caps |= UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+ ufs_qcom_setup_clocks(hba, true);
+ goto out;
+
+out_disable_phy:
+ phy_power_off(host->generic_phy);
+out_phy_exit:
+ phy_exit(host->generic_phy);
+ devm_kfree(dev, host);
+ hba->priv = NULL;
+out:
+ return err;
+}
+
+static void ufs_qcom_exit(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(host->generic_phy);
+}
+
+
+void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = hba->priv;
+ struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+
+ if (!dev_req_params)
+ return;
+
+ ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate);
+}
+
+/**
+ * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
+ *
+ * The variant operations configure the necessary controller and PHY
+ * handshake during initializaiton.
+ */
+const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+ .name = "qcom",
+ .init = ufs_qcom_init,
+ .exit = ufs_qcom_exit,
+ .clk_scale_notify = ufs_qcom_clk_scale_notify,
+ .setup_clocks = ufs_qcom_setup_clocks,
+ .hce_enable_notify = ufs_qcom_hce_enable_notify,
+ .link_startup_notify = ufs_qcom_link_startup_notify,
+ .pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .suspend = ufs_qcom_suspend,
+ .resume = ufs_qcom_resume,
+};
+EXPORT_SYMBOL(ufs_hba_qcom_vops);
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
deleted file mode 100644
index 42c459a..0000000
--- a/drivers/scsi/ufs/ufs.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * Universal Flash Storage Host controller driver
- *
- * This code is based on drivers/scsi/ufs/ufs.h
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- * Santosh Yaraganavi <santosh.sy@...sung.com>
- * Vinayak Holikatti <h.vinayak@...sung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * See the COPYING file in the top-level directory or visit
- * <http://www.gnu.org/licenses/gpl-2.0.html>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * This program is provided "AS IS" and "WITH ALL FAULTS" and
- * without warranty of any kind. You are solely responsible for
- * determining the appropriateness of using and distributing
- * the program and assume all risks associated with your exercise
- * of rights with respect to the program, including but not limited
- * to infringement of third party rights, the risks and costs of
- * program errors, damage to or loss of data, programs or equipment,
- * and unavailability or interruption of operations. Under no
- * circumstances will the contributor of this Program be liable for
- * any damages of any kind arising from your use or distribution of
- * this program.
- */
-
-#ifndef _UFS_H
-#define _UFS_H
-
-#include <linux/mutex.h>
-#include <linux/types.h>
-
-#define MAX_CDB_SIZE 16
-#define GENERAL_UPIU_REQUEST_SIZE 32
-#define QUERY_DESC_MAX_SIZE 255
-#define QUERY_DESC_MIN_SIZE 2
-#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
- (sizeof(struct utp_upiu_header)))
-
-#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
- cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
- (byte1 << 8) | (byte0))
-/*
- * UFS device may have standard LUs and LUN id could be from 0x00 to
- * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
- * UFS device may also have the Well Known LUs (also referred as W-LU)
- * which again could be from 0x00 to 0x7F. For W-LUs, device only use
- * the "Extended Addressing Format" which means the W-LUNs would be
- * from 0xc100 (SCSI_W_LUN_BASE) onwards.
- * This means max. LUN number reported from UFS device could be 0xC17F.
- */
-#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F
-#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
-#define UFS_UPIU_WLUN_ID (1 << 7)
-#define UFS_UPIU_MAX_GENERAL_LUN 8
-
-/* Well known logical unit id in LUN field of UPIU */
-enum {
- UFS_UPIU_REPORT_LUNS_WLUN = 0x81,
- UFS_UPIU_UFS_DEVICE_WLUN = 0xD0,
- UFS_UPIU_BOOT_WLUN = 0xB0,
- UFS_UPIU_RPMB_WLUN = 0xC4,
-};
-
-/*
- * UFS Protocol Information Unit related definitions
- */
-
-/* Task management functions */
-enum {
- UFS_ABORT_TASK = 0x01,
- UFS_ABORT_TASK_SET = 0x02,
- UFS_CLEAR_TASK_SET = 0x04,
- UFS_LOGICAL_RESET = 0x08,
- UFS_QUERY_TASK = 0x80,
- UFS_QUERY_TASK_SET = 0x81,
-};
-
-/* UTP UPIU Transaction Codes Initiator to Target */
-enum {
- UPIU_TRANSACTION_NOP_OUT = 0x00,
- UPIU_TRANSACTION_COMMAND = 0x01,
- UPIU_TRANSACTION_DATA_OUT = 0x02,
- UPIU_TRANSACTION_TASK_REQ = 0x04,
- UPIU_TRANSACTION_QUERY_REQ = 0x16,
-};
-
-/* UTP UPIU Transaction Codes Target to Initiator */
-enum {
- UPIU_TRANSACTION_NOP_IN = 0x20,
- UPIU_TRANSACTION_RESPONSE = 0x21,
- UPIU_TRANSACTION_DATA_IN = 0x22,
- UPIU_TRANSACTION_TASK_RSP = 0x24,
- UPIU_TRANSACTION_READY_XFER = 0x31,
- UPIU_TRANSACTION_QUERY_RSP = 0x36,
- UPIU_TRANSACTION_REJECT_UPIU = 0x3F,
-};
-
-/* UPIU Read/Write flags */
-enum {
- UPIU_CMD_FLAGS_NONE = 0x00,
- UPIU_CMD_FLAGS_WRITE = 0x20,
- UPIU_CMD_FLAGS_READ = 0x40,
-};
-
-/* UPIU Task Attributes */
-enum {
- UPIU_TASK_ATTR_SIMPLE = 0x00,
- UPIU_TASK_ATTR_ORDERED = 0x01,
- UPIU_TASK_ATTR_HEADQ = 0x02,
- UPIU_TASK_ATTR_ACA = 0x03,
-};
-
-/* UPIU Query request function */
-enum {
- UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01,
- UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81,
-};
-
-/* Flag idn for Query Requests*/
-enum flag_idn {
- QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
- QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
- QUERY_FLAG_IDN_BKOPS_EN = 0x04,
-};
-
-/* Attribute idn for Query requests */
-enum attr_idn {
- QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
- QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
- QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
- QUERY_ATTR_IDN_EE_STATUS = 0x0E,
-};
-
-/* Descriptor idn for Query requests */
-enum desc_idn {
- QUERY_DESC_IDN_DEVICE = 0x0,
- QUERY_DESC_IDN_CONFIGURAION = 0x1,
- QUERY_DESC_IDN_UNIT = 0x2,
- QUERY_DESC_IDN_RFU_0 = 0x3,
- QUERY_DESC_IDN_INTERCONNECT = 0x4,
- QUERY_DESC_IDN_STRING = 0x5,
- QUERY_DESC_IDN_RFU_1 = 0x6,
- QUERY_DESC_IDN_GEOMETRY = 0x7,
- QUERY_DESC_IDN_POWER = 0x8,
- QUERY_DESC_IDN_MAX,
-};
-
-enum desc_header_offset {
- QUERY_DESC_LENGTH_OFFSET = 0x00,
- QUERY_DESC_DESC_TYPE_OFFSET = 0x01,
-};
-
-enum ufs_desc_max_size {
- QUERY_DESC_DEVICE_MAX_SIZE = 0x1F,
- QUERY_DESC_CONFIGURAION_MAX_SIZE = 0x90,
- QUERY_DESC_UNIT_MAX_SIZE = 0x23,
- QUERY_DESC_INTERCONNECT_MAX_SIZE = 0x06,
- /*
- * Max. 126 UNICODE characters (2 bytes per character) plus 2 bytes
- * of descriptor header.
- */
- QUERY_DESC_STRING_MAX_SIZE = 0xFE,
- QUERY_DESC_GEOMETRY_MAZ_SIZE = 0x44,
- QUERY_DESC_POWER_MAX_SIZE = 0x62,
- QUERY_DESC_RFU_MAX_SIZE = 0x00,
-};
-
-/* Unit descriptor parameters offsets in bytes*/
-enum unit_desc_param {
- UNIT_DESC_PARAM_LEN = 0x0,
- UNIT_DESC_PARAM_TYPE = 0x1,
- UNIT_DESC_PARAM_UNIT_INDEX = 0x2,
- UNIT_DESC_PARAM_LU_ENABLE = 0x3,
- UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4,
- UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5,
- UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6,
- UNIT_DESC_PARAM_MEM_TYPE = 0x8,
- UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9,
- UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA,
- UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB,
- UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13,
- UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17,
- UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18,
- UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20,
- UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
-};
-
-/*
- * Logical Unit Write Protect
- * 00h: LU not write protected
- * 01h: LU write protected when fPowerOnWPEn =1
- * 02h: LU permanently write protected when fPermanentWPEn =1
- */
-enum ufs_lu_wp_type {
- UFS_LU_NO_WP = 0x00,
- UFS_LU_POWER_ON_WP = 0x01,
- UFS_LU_PERM_WP = 0x02,
-};
-
-/* bActiveICCLevel parameter current units */
-enum {
- UFSHCD_NANO_AMP = 0,
- UFSHCD_MICRO_AMP = 1,
- UFSHCD_MILI_AMP = 2,
- UFSHCD_AMP = 3,
-};
-
-#define POWER_DESC_MAX_SIZE 0x62
-#define POWER_DESC_MAX_ACTV_ICC_LVLS 16
-
-/* Attribute bActiveICCLevel parameter bit masks definitions */
-#define ATTR_ICC_LVL_UNIT_OFFSET 14
-#define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
-#define ATTR_ICC_LVL_VALUE_MASK 0x3FF
-
-/* Power descriptor parameters offsets in bytes */
-enum power_desc_param_offset {
- PWR_DESC_LEN = 0x0,
- PWR_DESC_TYPE = 0x1,
- PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2,
- PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22,
- PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42,
-};
-
-/* Exception event mask values */
-enum {
- MASK_EE_STATUS = 0xFFFF,
- MASK_EE_URGENT_BKOPS = (1 << 2),
-};
-
-/* Background operation status */
-enum bkops_status {
- BKOPS_STATUS_NO_OP = 0x0,
- BKOPS_STATUS_NON_CRITICAL = 0x1,
- BKOPS_STATUS_PERF_IMPACT = 0x2,
- BKOPS_STATUS_CRITICAL = 0x3,
- BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL,
-};
-
-/* UTP QUERY Transaction Specific Fields OpCode */
-enum query_opcode {
- UPIU_QUERY_OPCODE_NOP = 0x0,
- UPIU_QUERY_OPCODE_READ_DESC = 0x1,
- UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
- UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
- UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
- UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
- UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
- UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
- UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
-};
-
-/* Query response result code */
-enum {
- QUERY_RESULT_SUCCESS = 0x00,
- QUERY_RESULT_NOT_READABLE = 0xF6,
- QUERY_RESULT_NOT_WRITEABLE = 0xF7,
- QUERY_RESULT_ALREADY_WRITTEN = 0xF8,
- QUERY_RESULT_INVALID_LENGTH = 0xF9,
- QUERY_RESULT_INVALID_VALUE = 0xFA,
- QUERY_RESULT_INVALID_SELECTOR = 0xFB,
- QUERY_RESULT_INVALID_INDEX = 0xFC,
- QUERY_RESULT_INVALID_IDN = 0xFD,
- QUERY_RESULT_INVALID_OPCODE = 0xFE,
- QUERY_RESULT_GENERAL_FAILURE = 0xFF,
-};
-
-/* UTP Transfer Request Command Type (CT) */
-enum {
- UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
- UPIU_COMMAND_SET_TYPE_UFS = 0x1,
- UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
-};
-
-/* UTP Transfer Request Command Offset */
-#define UPIU_COMMAND_TYPE_OFFSET 28
-
-/* Offset of the response code in the UPIU header */
-#define UPIU_RSP_CODE_OFFSET 8
-
-enum {
- MASK_SCSI_STATUS = 0xFF,
- MASK_TASK_RESPONSE = 0xFF00,
- MASK_RSP_UPIU_RESULT = 0xFFFF,
- MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
- MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
- MASK_RSP_EXCEPTION_EVENT = 0x10000,
-};
-
-/* Task management service response */
-enum {
- UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
- UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
- UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
- UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
- UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
-};
-
-/* UFS device power modes */
-enum ufs_dev_pwr_mode {
- UFS_ACTIVE_PWR_MODE = 1,
- UFS_SLEEP_PWR_MODE = 2,
- UFS_POWERDOWN_PWR_MODE = 3,
-};
-
-/**
- * struct utp_upiu_header - UPIU header structure
- * @dword_0: UPIU header DW-0
- * @dword_1: UPIU header DW-1
- * @dword_2: UPIU header DW-2
- */
-struct utp_upiu_header {
- __be32 dword_0;
- __be32 dword_1;
- __be32 dword_2;
-};
-
-/**
- * struct utp_upiu_cmd - Command UPIU structure
- * @data_transfer_len: Data Transfer Length DW-3
- * @cdb: Command Descriptor Block CDB DW-4 to DW-7
- */
-struct utp_upiu_cmd {
- __be32 exp_data_transfer_len;
- u8 cdb[MAX_CDB_SIZE];
-};
-
-/**
- * struct utp_upiu_query - upiu request buffer structure for
- * query request.
- * @opcode: command to perform B-0
- * @idn: a value that indicates the particular type of data B-1
- * @index: Index to further identify data B-2
- * @selector: Index to further identify data B-3
- * @reserved_osf: spec reserved field B-4,5
- * @length: number of descriptor bytes to read/write B-6,7
- * @value: Attribute value to be written DW-5
- * @reserved: spec reserved DW-6,7
- */
-struct utp_upiu_query {
- u8 opcode;
- u8 idn;
- u8 index;
- u8 selector;
- __be16 reserved_osf;
- __be16 length;
- __be32 value;
- __be32 reserved[2];
-};
-
-/**
- * struct utp_upiu_req - general upiu request structure
- * @header:UPIU header structure DW-0 to DW-2
- * @sc: fields structure for scsi command DW-3 to DW-7
- * @qr: fields structure for query request DW-3 to DW-7
- */
-struct utp_upiu_req {
- struct utp_upiu_header header;
- union {
- struct utp_upiu_cmd sc;
- struct utp_upiu_query qr;
- };
-};
-
-/**
- * struct utp_cmd_rsp - Response UPIU structure
- * @residual_transfer_count: Residual transfer count DW-3
- * @reserved: Reserved double words DW-4 to DW-7
- * @sense_data_len: Sense data length DW-8 U16
- * @sense_data: Sense data field DW-8 to DW-12
- */
-struct utp_cmd_rsp {
- __be32 residual_transfer_count;
- __be32 reserved[4];
- __be16 sense_data_len;
- u8 sense_data[18];
-};
-
-/**
- * struct utp_upiu_rsp - general upiu response structure
- * @header: UPIU header structure DW-0 to DW-2
- * @sr: fields structure for scsi command DW-3 to DW-12
- * @qr: fields structure for query request DW-3 to DW-7
- */
-struct utp_upiu_rsp {
- struct utp_upiu_header header;
- union {
- struct utp_cmd_rsp sr;
- struct utp_upiu_query qr;
- };
-};
-
-/**
- * struct utp_upiu_task_req - Task request UPIU structure
- * @header - UPIU header structure DW0 to DW-2
- * @input_param1: Input parameter 1 DW-3
- * @input_param2: Input parameter 2 DW-4
- * @input_param3: Input parameter 3 DW-5
- * @reserved: Reserved double words DW-6 to DW-7
- */
-struct utp_upiu_task_req {
- struct utp_upiu_header header;
- __be32 input_param1;
- __be32 input_param2;
- __be32 input_param3;
- __be32 reserved[2];
-};
-
-/**
- * struct utp_upiu_task_rsp - Task Management Response UPIU structure
- * @header: UPIU header structure DW0-DW-2
- * @output_param1: Ouput parameter 1 DW3
- * @output_param2: Output parameter 2 DW4
- * @reserved: Reserved double words DW-5 to DW-7
- */
-struct utp_upiu_task_rsp {
- struct utp_upiu_header header;
- __be32 output_param1;
- __be32 output_param2;
- __be32 reserved[3];
-};
-
-/**
- * struct ufs_query_req - parameters for building a query request
- * @query_func: UPIU header query function
- * @upiu_req: the query request data
- */
-struct ufs_query_req {
- u8 query_func;
- struct utp_upiu_query upiu_req;
-};
-
-/**
- * struct ufs_query_resp - UPIU QUERY
- * @response: device response code
- * @upiu_res: query response data
- */
-struct ufs_query_res {
- u8 response;
- struct utp_upiu_query upiu_res;
-};
-
-#define UFS_VREG_VCC_MIN_UV 2700000 /* uV */
-#define UFS_VREG_VCC_MAX_UV 3600000 /* uV */
-#define UFS_VREG_VCC_1P8_MIN_UV 1700000 /* uV */
-#define UFS_VREG_VCC_1P8_MAX_UV 1950000 /* uV */
-#define UFS_VREG_VCCQ_MIN_UV 1100000 /* uV */
-#define UFS_VREG_VCCQ_MAX_UV 1300000 /* uV */
-#define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */
-#define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */
-
-/*
- * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
- * and link is in Hibern8 state.
- */
-#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */
-
-struct ufs_vreg {
- struct regulator *reg;
- const char *name;
- bool enabled;
- int min_uV;
- int max_uV;
- int min_uA;
- int max_uA;
-};
-
-struct ufs_vreg_info {
- struct ufs_vreg *vcc;
- struct ufs_vreg *vccq;
- struct ufs_vreg *vccq2;
- struct ufs_vreg *vdd_hba;
-};
-
-struct ufs_dev_info {
- bool f_power_on_wp_en;
- /* Keeps information if any of the LU is power on write protected */
- bool is_lu_power_on_wp;
-};
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 955ed55..2a18b8e 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -33,7 +33,7 @@
* this program.
*/
-#include "ufshcd.h"
+#include <linux/scsi/ufs/ufshcd.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 8adf067..d2b0ae6 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -37,7 +37,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
-#include "ufshcd.h"
+#include <linux/scsi/ufs/ufshcd.h>
static const struct of_device_id ufs_of_match[];
static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a0a6d1a..e03a114 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -40,8 +40,9 @@
#include <linux/async.h>
#include <linux/devfreq.h>
-#include "ufshcd.h"
-#include "unipro.h"
+#include <linux/scsi/ufs/ufshcd.h>
+#include <linux/scsi/ufs/unipro.h>
+#include "ufshci.h"
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
@@ -2490,6 +2491,15 @@ out:
}
/**
+ * ufshcd_hba_stop - Send controller to reset state
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE);
+}
+
+/**
* ufshcd_hba_enable - initialize the controller
* @hba: per adapter instance
*
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
deleted file mode 100644
index d502d70..0000000
--- a/drivers/scsi/ufs/ufshcd.h
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * Universal Flash Storage Host controller driver
- *
- * This code is based on drivers/scsi/ufs/ufshcd.h
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- * Santosh Yaraganavi <santosh.sy@...sung.com>
- * Vinayak Holikatti <h.vinayak@...sung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * See the COPYING file in the top-level directory or visit
- * <http://www.gnu.org/licenses/gpl-2.0.html>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * This program is provided "AS IS" and "WITH ALL FAULTS" and
- * without warranty of any kind. You are solely responsible for
- * determining the appropriateness of using and distributing
- * the program and assume all risks associated with your exercise
- * of rights with respect to the program, including but not limited
- * to infringement of third party rights, the risks and costs of
- * program errors, damage to or loss of data, programs or equipment,
- * and unavailability or interruption of operations. Under no
- * circumstances will the contributor of this Program be liable for
- * any damages of any kind arising from your use or distribution of
- * this program.
- */
-
-#ifndef _UFSHCD_H
-#define _UFSHCD_H
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/bitops.h>
-#include <linux/pm_runtime.h>
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "ufs.h"
-#include "ufshci.h"
-
-#define UFSHCD "ufshcd"
-#define UFSHCD_DRIVER_VERSION "0.2"
-
-struct ufs_hba;
-
-enum dev_cmd_type {
- DEV_CMD_TYPE_NOP = 0x0,
- DEV_CMD_TYPE_QUERY = 0x1,
-};
-
-/**
- * struct uic_command - UIC command structure
- * @command: UIC command
- * @argument1: UIC command argument 1
- * @argument2: UIC command argument 2
- * @argument3: UIC command argument 3
- * @cmd_active: Indicate if UIC command is outstanding
- * @result: UIC command result
- * @done: UIC command completion
- */
-struct uic_command {
- u32 command;
- u32 argument1;
- u32 argument2;
- u32 argument3;
- int cmd_active;
- int result;
- struct completion done;
-};
-
-/* Used to differentiate the power management options */
-enum ufs_pm_op {
- UFS_RUNTIME_PM,
- UFS_SYSTEM_PM,
- UFS_SHUTDOWN_PM,
-};
-
-#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM)
-#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM)
-#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM)
-
-/* Host <-> Device UniPro Link state */
-enum uic_link_state {
- UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
- UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
- UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
-};
-
-#define ufshcd_is_link_off(hba) ((hba)->uic_link_state ==
UIC_LINK_OFF_STATE)
-#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
- UIC_LINK_ACTIVE_STATE)
-#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
- UIC_LINK_HIBERN8_STATE)
-#define ufshcd_set_link_off(hba) ((hba)->uic_link_state =
UIC_LINK_OFF_STATE)
-#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
- UIC_LINK_ACTIVE_STATE)
-#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
- UIC_LINK_HIBERN8_STATE)
-
-/*
- * UFS Power management levels.
- * Each level is in increasing order of power savings.
- */
-enum ufs_pm_level {
- UFS_PM_LVL_0, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE */
- UFS_PM_LVL_1, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE */
- UFS_PM_LVL_2, /* UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE */
- UFS_PM_LVL_3, /* UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE */
- UFS_PM_LVL_4, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE */
- UFS_PM_LVL_5, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE */
- UFS_PM_LVL_MAX
-};
-
-struct ufs_pm_lvl_states {
- enum ufs_dev_pwr_mode dev_state;
- enum uic_link_state link_state;
-};
-
-/**
- * struct ufshcd_lrb - local reference block
- * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_req_ptr: UCD address of the command
- * @ucd_rsp_ptr: Response UPIU address for this command
- * @ucd_prdt_ptr: PRDT address of the command
- * @cmd: pointer to SCSI command
- * @sense_buffer: pointer to sense buffer address of the SCSI command
- * @sense_bufflen: Length of the sense buffer
- * @scsi_status: SCSI status of the command
- * @command_type: SCSI, UFS, Query.
- * @task_tag: Task tag of the command
- * @lun: LUN of the command
- * @intr_cmd: Interrupt command (doesn't participate in interrupt
aggregation)
- */
-struct ufshcd_lrb {
- struct utp_transfer_req_desc *utr_descriptor_ptr;
- struct utp_upiu_req *ucd_req_ptr;
- struct utp_upiu_rsp *ucd_rsp_ptr;
- struct ufshcd_sg_entry *ucd_prdt_ptr;
-
- struct scsi_cmnd *cmd;
- u8 *sense_buffer;
- unsigned int sense_bufflen;
- int scsi_status;
-
- int command_type;
- int task_tag;
- u8 lun; /* UPIU LUN id field is only 8-bit wide */
- bool intr_cmd;
-};
-
-/**
- * struct ufs_query - holds relevent data structures for query request
- * @request: request upiu and function
- * @descriptor: buffer for sending/receiving descriptor
- * @response: response upiu and response
- */
-struct ufs_query {
- struct ufs_query_req request;
- u8 *descriptor;
- struct ufs_query_res response;
-};
-
-/**
- * struct ufs_dev_cmd - all assosiated fields with device management
commands
- * @type: device management command type - Query, NOP OUT
- * @lock: lock to allow one command at a time
- * @complete: internal commands completion
- * @tag_wq: wait queue until free command slot is available
- */
-struct ufs_dev_cmd {
- enum dev_cmd_type type;
- struct mutex lock;
- struct completion *complete;
- wait_queue_head_t tag_wq;
- struct ufs_query query;
-};
-
-/**
- * struct ufs_clk_info - UFS clock related info
- * @list: list headed by hba->clk_list_head
- * @clk: clock node
- * @name: clock name
- * @max_freq: maximum frequency supported by the clock
- * @min_freq: min frequency that can be used for clock scaling
- * @curr_freq: indicates the current frequency that it is set to
- * @enabled: variable to check against multiple enable/disable
- */
-struct ufs_clk_info {
- struct list_head list;
- struct clk *clk;
- const char *name;
- u32 max_freq;
- u32 min_freq;
- u32 curr_freq;
- bool enabled;
-};
-
-#define PRE_CHANGE 0
-#define POST_CHANGE 1
-
-struct ufs_pa_layer_attr {
- u32 gear_rx;
- u32 gear_tx;
- u32 lane_rx;
- u32 lane_tx;
- u32 pwr_rx;
- u32 pwr_tx;
- u32 hs_rate;
-};
-
-struct ufs_pwr_mode_info {
- bool is_valid;
- struct ufs_pa_layer_attr info;
-};
-
-/**
- * struct ufs_hba_variant_ops - variant specific callbacks
- * @name: variant name
- * @init: called when the driver is initialized
- * @exit: called to cleanup everything done in init
- * @clk_scale_notify: notifies that clks are scaled up/down
- * @setup_clocks: called before touching any of the controller registers
- * @setup_regulators: called before accessing the host controller
- * @hce_enable_notify: called before and after HCE enable bit is set to
allow
- * variant specific Uni-Pro initialization.
- * @link_startup_notify: called before and after Link startup is carried
out
- * to allow variant specific Uni-Pro initialization.
- * @pwr_change_notify: called before and after a power mode change
- * is carried out to allow vendor spesific capabilities
- * to be set.
- * @suspend: called during host controller PM callback
- * @resume: called during host controller PM callback
- */
-struct ufs_hba_variant_ops {
- const char *name;
- int (*init)(struct ufs_hba *);
- void (*exit)(struct ufs_hba *);
- void (*clk_scale_notify)(struct ufs_hba *);
- int (*setup_clocks)(struct ufs_hba *, bool);
- int (*setup_regulators)(struct ufs_hba *, bool);
- int (*hce_enable_notify)(struct ufs_hba *, bool);
- int (*link_startup_notify)(struct ufs_hba *, bool);
- int (*pwr_change_notify)(struct ufs_hba *,
- bool, struct ufs_pa_layer_attr *,
- struct ufs_pa_layer_attr *);
- int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
- int (*resume)(struct ufs_hba *, enum ufs_pm_op);
-};
-
-/* clock gating state */
-enum clk_gating_state {
- CLKS_OFF,
- CLKS_ON,
- REQ_CLKS_OFF,
- REQ_CLKS_ON,
-};
-
-/**
- * struct ufs_clk_gating - UFS clock gating related info
- * @gate_work: worker to turn off clocks after some delay as specified in
- * delay_ms
- * @ungate_work: worker to turn on clocks that will be used in case of
- * interrupt context
- * @state: the current clocks state
- * @delay_ms: gating delay in ms
- * @is_suspended: clk gating is suspended when set to 1 which can be used
- * during suspend/resume
- * @delay_attr: sysfs attribute to control delay_attr
- * @active_reqs: number of requests that are pending and should be waited
for
- * completion before gating clocks.
- */
-struct ufs_clk_gating {
- struct delayed_work gate_work;
- struct work_struct ungate_work;
- enum clk_gating_state state;
- unsigned long delay_ms;
- bool is_suspended;
- struct device_attribute delay_attr;
- int active_reqs;
-};
-
-struct ufs_clk_scaling {
- ktime_t busy_start_t;
- bool is_busy_started;
- unsigned long tot_busy_t;
- unsigned long window_start_t;
-};
-
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
- u32 icc_level;
-};
-
-/**
- * struct ufs_hba - per adapter private structure
- * @mmio_base: UFSHCI base register address
- * @ucdl_base_addr: UFS Command Descriptor base address
- * @utrdl_base_addr: UTP Transfer Request Descriptor base address
- * @utmrdl_base_addr: UTP Task Management Descriptor base address
- * @ucdl_dma_addr: UFS Command Descriptor DMA address
- * @utrdl_dma_addr: UTRDL DMA address
- * @utmrdl_dma_addr: UTMRDL DMA address
- * @host: Scsi_Host instance of the driver
- * @dev: device handle
- * @lrb: local reference block
- * @lrb_in_use: lrb in use
- * @outstanding_tasks: Bits representing outstanding task requests
- * @outstanding_reqs: Bits representing outstanding transfer requests
- * @capabilities: UFS Controller Capabilities
- * @nutrs: Transfer Request Queue depth supported by controller
- * @nutmrs: Task Management Queue depth supported by controller
- * @ufs_version: UFS Version to which controller complies
- * @vops: pointer to variant specific operations
- * @priv: pointer to variant specific private data
- * @irq: Irq number of the controller
- * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for uic command
- * @tm_wq: wait queue for task management
- * @tm_tag_wq: wait queue for free task management slots
- * @tm_slots_in_use: bit map of task management request slots in use
- * @pwr_done: completion for power mode change
- * @tm_condition: condition variable for task management
- * @ufshcd_state: UFSHCD states
- * @eh_flags: Error handling flags
- * @intr_mask: Interrupt Mask Bits
- * @ee_ctrl_mask: Exception event control mask
- * @is_powered: flag to check if HBA is powered
- * @is_init_prefetch: flag to check if data was pre-fetched in
initialization
- * @init_prefetch_data: data pre-fetched during initialization
- * @eh_work: Worker to handle UFS errors that require s/w attention
- * @eeh_work: Worker to handle exception events
- * @errors: HBA errors
- * @uic_error: UFS interconnect layer error status
- * @saved_err: sticky error mask
- * @saved_uic_err: sticky UIC error mask
- * @dev_cmd: ufs device management command information
- * @auto_bkops_enabled: to track whether bkops is enabled in device
- * @vreg_info: UFS device voltage regulator information
- * @clk_list_head: UFS host controller clocks list node head
- * @pwr_info: holds current power mode
- * @max_pwr_info: keeps the device max valid pwm
- */
-struct ufs_hba {
- void __iomem *mmio_base;
-
- /* Virtual memory reference */
- struct utp_transfer_cmd_desc *ucdl_base_addr;
- struct utp_transfer_req_desc *utrdl_base_addr;
- struct utp_task_req_desc *utmrdl_base_addr;
-
- /* DMA memory reference */
- dma_addr_t ucdl_dma_addr;
- dma_addr_t utrdl_dma_addr;
- dma_addr_t utmrdl_dma_addr;
-
- struct Scsi_Host *host;
- struct device *dev;
- /*
- * This field is to keep a reference to "scsi_device" corresponding
to
- * "UFS device" W-LU.
- */
- struct scsi_device *sdev_ufs_device;
- enum ufs_dev_pwr_mode curr_dev_pwr_mode;
- enum uic_link_state uic_link_state;
- /* Desired UFS power management level during runtime PM */
- enum ufs_pm_level rpm_lvl;
- /* Desired UFS power management level during system PM */
- enum ufs_pm_level spm_lvl;
- int pm_op_in_progress;
-
- struct ufshcd_lrb *lrb;
- unsigned long lrb_in_use;
-
- unsigned long outstanding_tasks;
- unsigned long outstanding_reqs;
-
- u32 capabilities;
- int nutrs;
- int nutmrs;
- u32 ufs_version;
- struct ufs_hba_variant_ops *vops;
- void *priv;
- unsigned int irq;
- bool is_irq_enabled;
-
-
- wait_queue_head_t tm_wq;
- wait_queue_head_t tm_tag_wq;
- unsigned long tm_condition;
- unsigned long tm_slots_in_use;
-
- struct uic_command *active_uic_cmd;
- struct mutex uic_cmd_mutex;
- struct completion *uic_async_done;
-
- u32 ufshcd_state;
- u32 eh_flags;
- u32 intr_mask;
- u16 ee_ctrl_mask;
- bool is_powered;
- bool is_init_prefetch;
- struct ufs_init_prefetch init_prefetch_data;
-
- /* Work Queues */
- struct work_struct eh_work;
- struct work_struct eeh_work;
-
- /* HBA Errors */
- u32 errors;
- u32 uic_error;
- u32 saved_err;
- u32 saved_uic_err;
-
- /* Device management request data */
- struct ufs_dev_cmd dev_cmd;
-
- /* Keeps information of the UFS device connected to this host */
- struct ufs_dev_info dev_info;
- bool auto_bkops_enabled;
- struct ufs_vreg_info vreg_info;
- struct list_head clk_list_head;
-
- bool wlun_dev_clr_ua;
-
- struct ufs_pa_layer_attr pwr_info;
- struct ufs_pwr_mode_info max_pwr_info;
-
- struct ufs_clk_gating clk_gating;
- /* Control to enable/disable host capabilities */
- u32 caps;
- /* Allow dynamic clk gating */
-#define UFSHCD_CAP_CLK_GATING (1 << 0)
- /* Allow hiberb8 with clk gating */
-#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
- /* Allow dynamic clk scaling */
-#define UFSHCD_CAP_CLK_SCALING (1 << 2)
- /* Allow auto bkops to enabled during runtime suspend */
-#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
-
- struct devfreq *devfreq;
- struct ufs_clk_scaling clk_scaling;
- bool is_sys_suspended;
-};
-
-/* Returns true if clocks can be gated. Otherwise false */
-static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_CLK_GATING;
-}
-static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
-}
-static inline int ufshcd_is_clkscaling_enabled(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_CLK_SCALING;
-}
-static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-}
-
-#define ufshcd_writel(hba, val, reg) \
- writel((val), (hba)->mmio_base + (reg))
-#define ufshcd_readl(hba, reg) \
- readl((hba)->mmio_base + (reg))
-
-/**
- * ufshcd_rmwl - read modify write into a register
- * @hba - per adapter instance
- * @mask - mask to apply on read value
- * @val - actual value to write
- * @reg - register address
- */
-static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32
reg)
-{
- u32 tmp;
-
- tmp = ufshcd_readl(hba, reg);
- tmp &= ~mask;
- tmp |= (val & mask);
- ufshcd_writel(hba, tmp, reg);
-}
-
-int ufshcd_alloc_host(struct device *, struct ufs_hba **);
-int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
-void ufshcd_remove(struct ufs_hba *);
-
-/**
- * ufshcd_hba_stop - Send controller to reset state
- * @hba: per adapter instance
- */
-static inline void ufshcd_hba_stop(struct ufs_hba *hba)
-{
- ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE);
-}
-
-static inline void check_upiu_size(void)
-{
- BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
- GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
-}
-
-extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
-extern int ufshcd_runtime_resume(struct ufs_hba *hba);
-extern int ufshcd_runtime_idle(struct ufs_hba *hba);
-extern int ufshcd_system_suspend(struct ufs_hba *hba);
-extern int ufshcd_system_resume(struct ufs_hba *hba);
-extern int ufshcd_shutdown(struct ufs_hba *hba);
-extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
- u8 attr_set, u32 mib_val, u8 peer);
-extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
- u32 *mib_val, u8 peer);
-
-/* UIC command interfaces for DME primitives */
-#define DME_LOCAL 0
-#define DME_PEER 1
-#define ATTR_SET_NOR 0 /* NORMAL */
-#define ATTR_SET_ST 1 /* STATIC */
-
-static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
- mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
- mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
- mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
- mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_get(struct ufs_hba *hba,
- u32 attr_sel, u32 *mib_val)
-{
- return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
- u32 attr_sel, u32 *mib_val)
-{
- return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
-}
-
-int ufshcd_hold(struct ufs_hba *hba, bool async);
-void ufshcd_release(struct ufs_hba *hba);
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
deleted file mode 100644
index 3fc3e21..0000000
--- a/drivers/scsi/ufs/unipro.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * drivers/scsi/ufs/unipro.h
- *
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _UNIPRO_H_
-#define _UNIPRO_H_
-
-/*
- * M-TX Configuration Attributes
- */
-#define TX_MODE 0x0021
-#define TX_HSRATE_SERIES 0x0022
-#define TX_HSGEAR 0x0023
-#define TX_PWMGEAR 0x0024
-#define TX_AMPLITUDE 0x0025
-#define TX_HS_SLEWRATE 0x0026
-#define TX_SYNC_SOURCE 0x0027
-#define TX_HS_SYNC_LENGTH 0x0028
-#define TX_HS_PREPARE_LENGTH 0x0029
-#define TX_LS_PREPARE_LENGTH 0x002A
-#define TX_HIBERN8_CONTROL 0x002B
-#define TX_LCC_ENABLE 0x002C
-#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
-#define TX_BYPASS_8B10B_ENABLE 0x002E
-#define TX_DRIVER_POLARITY 0x002F
-#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
-#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
-#define TX_LCC_SEQUENCER 0x0032
-#define TX_MIN_ACTIVATETIME 0x0033
-#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
-
-/*
- * M-RX Configuration Attributes
- */
-#define RX_MODE 0x00A1
-#define RX_HSRATE_SERIES 0x00A2
-#define RX_HSGEAR 0x00A3
-#define RX_PWMGEAR 0x00A4
-#define RX_LS_TERMINATED_ENABLE 0x00A5
-#define RX_HS_UNTERMINATED_ENABLE 0x00A6
-#define RX_ENTER_HIBERN8 0x00A7
-#define RX_BYPASS_8B10B_ENABLE 0x00A8
-#define RX_TERMINATION_FORCE_ENABLE 0x0089
-
-#define is_mphy_tx_attr(attr) (attr < RX_MODE)
-/*
- * PHY Adpater attributes
- */
-#define PA_ACTIVETXDATALANES 0x1560
-#define PA_ACTIVERXDATALANES 0x1580
-#define PA_TXTRAILINGCLOCKS 0x1564
-#define PA_PHY_TYPE 0x1500
-#define PA_AVAILTXDATALANES 0x1520
-#define PA_AVAILRXDATALANES 0x1540
-#define PA_MINRXTRAILINGCLOCKS 0x1543
-#define PA_TXPWRSTATUS 0x1567
-#define PA_RXPWRSTATUS 0x1582
-#define PA_TXFORCECLOCK 0x1562
-#define PA_TXPWRMODE 0x1563
-#define PA_LEGACYDPHYESCDL 0x1570
-#define PA_MAXTXSPEEDFAST 0x1521
-#define PA_MAXTXSPEEDSLOW 0x1522
-#define PA_MAXRXSPEEDFAST 0x1541
-#define PA_MAXRXSPEEDSLOW 0x1542
-#define PA_TXLINKSTARTUPHS 0x1544
-#define PA_TXSPEEDFAST 0x1565
-#define PA_TXSPEEDSLOW 0x1566
-#define PA_REMOTEVERINFO 0x15A0
-#define PA_TXGEAR 0x1568
-#define PA_TXTERMINATION 0x1569
-#define PA_HSSERIES 0x156A
-#define PA_PWRMODE 0x1571
-#define PA_RXGEAR 0x1583
-#define PA_RXTERMINATION 0x1584
-#define PA_MAXRXPWMGEAR 0x1586
-#define PA_MAXRXHSGEAR 0x1587
-#define PA_RXHSUNTERMCAP 0x15A5
-#define PA_RXLSTERMCAP 0x15A6
-#define PA_PACPREQTIMEOUT 0x1590
-#define PA_PACPREQEOBTIMEOUT 0x1591
-#define PA_HIBERN8TIME 0x15A7
-#define PA_LOCALVERINFO 0x15A9
-#define PA_TACTIVATE 0x15A8
-#define PA_PACPFRAMECOUNT 0x15C0
-#define PA_PACPERRORCOUNT 0x15C1
-#define PA_PHYTESTCONTROL 0x15C2
-#define PA_PWRMODEUSERDATA0 0x15B0
-#define PA_PWRMODEUSERDATA1 0x15B1
-#define PA_PWRMODEUSERDATA2 0x15B2
-#define PA_PWRMODEUSERDATA3 0x15B3
-#define PA_PWRMODEUSERDATA4 0x15B4
-#define PA_PWRMODEUSERDATA5 0x15B5
-#define PA_PWRMODEUSERDATA6 0x15B6
-#define PA_PWRMODEUSERDATA7 0x15B7
-#define PA_PWRMODEUSERDATA8 0x15B8
-#define PA_PWRMODEUSERDATA9 0x15B9
-#define PA_PWRMODEUSERDATA10 0x15BA
-#define PA_PWRMODEUSERDATA11 0x15BB
-#define PA_CONNECTEDTXDATALANES 0x1561
-#define PA_CONNECTEDRXDATALANES 0x1581
-#define PA_LOGICALLANEMAP 0x15A1
-#define PA_SLEEPNOCONFIGTIME 0x15A2
-#define PA_STALLNOCONFIGTIME 0x15A3
-#define PA_SAVECONFIGTIME 0x15A4
-
-/* PA power modes */
-enum {
- FAST_MODE = 1,
- SLOW_MODE = 2,
- FASTAUTO_MODE = 4,
- SLOWAUTO_MODE = 5,
- UNCHANGED = 7,
-};
-
-/* PA TX/RX Frequency Series */
-enum {
- PA_HS_MODE_A = 1,
- PA_HS_MODE_B = 2,
-};
-
-enum ufs_pwm_gear_tag {
- UFS_PWM_DONT_CHANGE, /* Don't change Gear */
- UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
- UFS_PWM_G2, /* PWM Gear 2 */
- UFS_PWM_G3, /* PWM Gear 3 */
- UFS_PWM_G4, /* PWM Gear 4 */
- UFS_PWM_G5, /* PWM Gear 5 */
- UFS_PWM_G6, /* PWM Gear 6 */
- UFS_PWM_G7, /* PWM Gear 7 */
-};
-
-enum ufs_hs_gear_tag {
- UFS_HS_DONT_CHANGE, /* Don't change Gear */
- UFS_HS_G1, /* HS Gear 1 (default for reset) */
- UFS_HS_G2, /* HS Gear 2 */
- UFS_HS_G3, /* HS Gear 3 */
-};
-
-/*
- * Data Link Layer Attributes
- */
-#define DL_TC0TXFCTHRESHOLD 0x2040
-#define DL_FC0PROTTIMEOUTVAL 0x2041
-#define DL_TC0REPLAYTIMEOUTVAL 0x2042
-#define DL_AFC0REQTIMEOUTVAL 0x2043
-#define DL_AFC0CREDITTHRESHOLD 0x2044
-#define DL_TC0OUTACKTHRESHOLD 0x2045
-#define DL_TC1TXFCTHRESHOLD 0x2060
-#define DL_FC1PROTTIMEOUTVAL 0x2061
-#define DL_TC1REPLAYTIMEOUTVAL 0x2062
-#define DL_AFC1REQTIMEOUTVAL 0x2063
-#define DL_AFC1CREDITTHRESHOLD 0x2064
-#define DL_TC1OUTACKTHRESHOLD 0x2065
-#define DL_TXPREEMPTIONCAP 0x2000
-#define DL_TC0TXMAXSDUSIZE 0x2001
-#define DL_TC0RXINITCREDITVAL 0x2002
-#define DL_TC0TXBUFFERSIZE 0x2005
-#define DL_PEERTC0PRESENT 0x2046
-#define DL_PEERTC0RXINITCREVAL 0x2047
-#define DL_TC1TXMAXSDUSIZE 0x2003
-#define DL_TC1RXINITCREDITVAL 0x2004
-#define DL_TC1TXBUFFERSIZE 0x2006
-#define DL_PEERTC1PRESENT 0x2066
-#define DL_PEERTC1RXINITCREVAL 0x2067
-
-/*
- * Network Layer Attributes
- */
-#define N_DEVICEID 0x3000
-#define N_DEVICEID_VALID 0x3001
-#define N_TC0TXMAXSDUSIZE 0x3020
-#define N_TC1TXMAXSDUSIZE 0x3021
-
-/*
- * Transport Layer Attributes
- */
-#define T_NUMCPORTS 0x4000
-#define T_NUMTESTFEATURES 0x4001
-#define T_CONNECTIONSTATE 0x4020
-#define T_PEERDEVICEID 0x4021
-#define T_PEERCPORTID 0x4022
-#define T_TRAFFICCLASS 0x4023
-#define T_PROTOCOLID 0x4024
-#define T_CPORTFLAGS 0x4025
-#define T_TXTOKENVALUE 0x4026
-#define T_RXTOKENVALUE 0x4027
-#define T_LOCALBUFFERSPACE 0x4028
-#define T_PEERBUFFERSPACE 0x4029
-#define T_CREDITSTOSEND 0x402A
-#define T_CPORTMODE 0x402B
-#define T_TC0TXMAXSDUSIZE 0x4060
-#define T_TC1TXMAXSDUSIZE 0x4061
-
-/* Boolean attribute values */
-enum {
- FALSE = 0,
- TRUE,
-};
-
-#endif /* _UNIPRO_H_ */
diff --git a/include/linux/phy/phy-qcom-ufs.h
b/include/linux/phy/phy-qcom-ufs.h
new file mode 100644
index 0000000..f8eeb4c
--- /dev/null
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_H_
+#define UFS_QCOM_PHY_H_
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include <linux/scsi/ufs/ufshcd.h>
+#include <linux/scsi/ufs/unipro.h>
+#include <linux/scsi/ufs/ufs-qcom.h>
+
+#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
+ { \
+ .reg_offset = reg, \
+ .cfg_value = val, \
+ }
+
+#define UFS_QCOM_PHY_NAME_LEN 30
+
+enum {
+ MASK_SERDES_START = 0x1,
+ MASK_PCS_READY = 0x1,
+};
+
+enum {
+ OFFSET_SERDES_START = 0x0,
+};
+
+struct ufs_qcom_phy_stored_attributes {
+ u32 att;
+ u32 value;
+};
+
+struct ufs_qcom_phy_calibration {
+ u32 reg_offset;
+ u32 cfg_value;
+};
+
+struct ufs_qcom_phy {
+ struct list_head list;
+ struct device *dev;
+ void __iomem *mmio;
+ struct clk *tx_iface_clk;
+ struct clk *rx_iface_clk;
+ bool is_iface_clk_enabled;
+ struct clk *ref_clk_src;
+ struct clk *ref_clk_parent;
+ struct clk *ref_clk;
+ bool is_ref_clk_enabled;
+ struct ufs_qcom_phy_vreg vdda_pll;
+ struct ufs_qcom_phy_vreg vdda_phy;
+ unsigned int quirks;
+ u8 host_ctrl_rev_major;
+ u16 host_ctrl_rev_minor;
+ u16 host_ctrl_rev_step;
+
+ /*
+ * As part of UFS power management, UFS link would be put in
hibernate
+ * and UFS device would be put in SLEEP mode as part of
runtime/system
+ * suspend callback. But when system goes into suspend with VDD
+ * minimization, UFS PHY states are being reset which means UFS link
+ * hibernate exit command on system resume would fail.
+ * If this quirk is enabled then above issue is workaround by saving
+ * the UFS PHY state information before system goes into suspend and
+ * restoring the saved state information during system resume but
+ * before executing the hibern8 exit command.
+ * Note that this quirk will help restoring the PHY state if even
when
+ * link in not kept in hibern8 during suspend.
+ *
+ * Here is the list of steps to save/restore the configuration:
+ * Before entering into system suspend:
+ * 1. Read Critical PCS SWI Registers + less critical PHY CSR
+ * 2. Read RMMI Attributes
+ * Enter into system suspend
+ * After exiting from system suspend:
+ * 1. Set UFS_PHY_SOFT_RESET bit in UFS_CFG1 register of the
UFS
+ * Controller
+ * 2. Write 0x01 to the UFS_PHY_POWER_DOWN_CONTROL register in
the
+ * UFS PHY
+ * 3. Write back the values of the PHY SWI registers
+ * 4. Clear UFS_PHY_SOFT_RESET bit in UFS_CFG1 register of the
UFS
+ * Controller
+ * 5. Write 0x01 to the UFS_PHY_PHY_START in the UFS PHY. This
will
+ * start the PLL calibration and bring-up of the PHY.
+ * 6. Write back the values to the PHY RMMI Attributes
+ * 7. Wait for UFS_PHY_PCS_READY_STATUS[0] to be '1'
+ */
+ #define UFS_QCOM_PHY_QUIRK_CFG_RESTORE (1 << 0)
+
+ /*
+ * If UFS PHY power down is deasserted and power is restored to
analog
+ * circuits, the rx_sigdet can glitch. If the glitch is wide enough,
+ * it can trigger the digital logic to think it saw a DIF-N and cause
+ * it to exit Hibern8. Disabling the rx_sigdet during power-up masks
+ * the glitch.
+ */
+ #define UFS_QCOM_PHY_DIS_SIGDET_BEFORE_PWR_COLLAPSE (1 << 1)
+
+ /*
+ * If UFS link is put into Hibern8 and if UFS PHY analog hardware is
+ * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
+ * exit might fail even after powering on UFS PHY analog hardware.
+ * Enabling this quirk will help to solve above issue by doing
+ * custom PHY settings just before PHY analog power collapse.
+ */
+ #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE (1
<< 2)
+
+ char name[UFS_QCOM_PHY_NAME_LEN];
+ struct ufs_qcom_phy_calibration *cached_regs;
+ int cached_regs_table_size;
+ bool is_powered_on;
+ struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+};
+
+/**
+ * struct ufs_qcom_phy_specific_ops - set of pointers to functions which
have a
+ * specific implementation per phy. Each UFS phy, should implement
+ * those functions according to its spec and requirements
+ * @calibrate_phy: pointer to a function that calibrate the phy
+ * @start_serdes: pointer to a function that starts the serdes
+ * @save_configuration: pointer to a function that saves phy
+ * configuration
+ * @is_physical_coding_sublayer_ready: pointer to a function that
+ * checks pcs readiness
+ * @set_tx_lane_enable: pointer to a function that enable tx lanes
+ * @power_control: pointer to a function that controls analog rail of phy
+ * and writes to QSERDES_RX_SIGDET_CNTRL attribute
+ */
+struct ufs_qcom_phy_specific_ops {
+ int (*calibrate_phy)(struct ufs_qcom_phy *phy);
+ void (*start_serdes)(struct ufs_qcom_phy *phy);
+ void (*save_configuration)(struct ufs_qcom_phy *phy);
+ void (*restore_configuration)(struct ufs_qcom_phy *phy);
+ int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
+ void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
+ void (*power_control)(struct ufs_qcom_phy *phy, bool val);
+};
+
+int ufs_qcom_phy_init_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, const char *name);
+int ufs_qcom_phy_cfg_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg, bool on);
+int ufs_qcom_phy_enable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg);
+int ufs_qcom_phy_disable_vreg(struct phy *phy,
+ struct ufs_qcom_phy_vreg *vreg);
+int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
+void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
+int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
+void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
+void ufs_qcom_phy_restore_swi_regs(struct phy *phy);
+int ufs_qcom_phy_link_startup_post_change(struct phy *phy,
+ struct ufs_hba *hba);
+int ufs_qcom_phy_base_init(struct platform_device *pdev,
+ struct ufs_qcom_phy *ufs_qcom_phy_ops);
+int ufs_qcom_phy_is_cfg_restore_quirk_enabled(struct phy *phy);
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
+int ufs_qcom_phy_start_serdes(struct phy *generic_phy);
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes);
+int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy);
+int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy);
+int ufs_qcom_phy_save_configuration(struct phy *generic_phy);
+int ufs_qcom_phy_restore_configuration(struct phy *generic_phy);
+void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
+ u8 major, u16 minor, u16 step);
+int ufs_qcom_phy_power_on(struct phy *generic_phy);
+int ufs_qcom_phy_power_off(struct phy *generic_phy);
+int ufs_qcom_phy_exit(struct phy *generic_phy);
+int ufs_qcom_phy_init_clks(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+ struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+ struct ufs_qcom_phy *ufs_qcom_phy);
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+ struct ufs_qcom_phy *common_cfg,
+ struct phy_ops *ufs_qcom_phy_gen_ops,
+ struct ufs_qcom_phy_specific_ops *phy_spec_ops);
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+ struct ufs_qcom_phy_calibration *tbl_A, int
tbl_size_A,
+ struct ufs_qcom_phy_calibration *tbl_B, int
tbl_size_B,
+ int rate);
+#endif
diff --git a/include/linux/scsi/ufs/ufs-qcom.h
b/include/linux/scsi/ufs/ufs-qcom.h
new file mode 100644
index 0000000..d32a3af
--- /dev/null
+++ b/include/linux/scsi/ufs/ufs-qcom.h
@@ -0,0 +1,156 @@
+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_H_
+#define UFS_QCOM_H_
+
+#include <linux/phy/phy.h>
+
+#define MAX_U32 (~(u32)0)
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_HIBERN8 0x1
+#define HBRN8_POLL_TOUT_MS 100
+#define DEFAULT_CLK_RATE_HZ 1000000
+#define BUS_VECTOR_NAME_LEN 32
+
+#define UFS_HW_VER_MAJOR_SHFT (28)
+#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
+#define UFS_HW_VER_MINOR_SHFT (16)
+#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT)
+#define UFS_HW_VER_STEP_SHFT (0)
+#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
+#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
+#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
+#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
+#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
+#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE
+#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_QCOM_LIMIT_DESIRED_MODE FAST
+
+/* QCOM UFS host controller vendor specific registers */
+enum {
+ REG_UFS_SYS1CLK_1US = 0xC0,
+ REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4,
+ REG_UFS_LOCAL_PORT_ID_REG = 0xC8,
+ REG_UFS_PA_ERR_CODE = 0xCC,
+ REG_UFS_RETRY_TIMER_REG = 0xD0,
+ REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
+ REG_UFS_CFG1 = 0xDC,
+ REG_UFS_CFG2 = 0xE0,
+ REG_UFS_HW_VERSION = 0xE4,
+};
+
+/* bit offset */
+enum {
+ OFFSET_UFS_PHY_SOFT_RESET = 1,
+ OFFSET_CLK_NS_REG = 10,
+};
+
+/* bit masks */
+enum {
+ MASK_UFS_PHY_SOFT_RESET = 0x2,
+ MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF,
+ MASK_CLK_NS_REG = 0xFFFC00,
+};
+
+enum ufs_qcom_phy_init_type {
+ UFS_PHY_INIT_FULL,
+ UFS_PHY_INIT_CFG_RESTORE,
+};
+
+struct ufs_qcom_phy_vreg {
+ const char *name;
+ struct regulator *reg;
+ int max_uA;
+ int min_uV;
+ int max_uV;
+ bool enabled;
+};
+
+static inline void
+ufs_qcom_get_controller_revision(struct ufs_hba *hba,
+ u8 *major, u16 *minor, u16 *step)
+{
+ u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
+
+ *major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
+ *minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
+ *step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
+};
+
+static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
+{
+ ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+ 1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+ /*
+ * ensure that controller writes MASK_UFS_PHY_SOFT_RESET
+ * before it continues
+ */
+ mb();
+}
+
+static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
+{
+ ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+ 0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+ /*
+ * ensure that controller writes MASK_UFS_PHY_SOFT_RESET
+ * before it continues
+ */
+ mb();
+}
+
+struct ufs_qcom_bus_vote {
+ uint32_t client_handle;
+ uint32_t curr_vote;
+ int min_bw_vote;
+ int max_bw_vote;
+ int saved_vote;
+ bool is_max_bw_needed;
+ struct device_attribute max_bus_bw;
+};
+
+struct ufs_qcom_host {
+ struct phy *generic_phy;
+ struct ufs_hba *hba;
+ struct ufs_qcom_bus_vote bus_vote;
+ struct ufs_pa_layer_attr dev_req_params;
+ struct clk *rx_l0_sync_clk;
+ struct clk *tx_l0_sync_clk;
+ struct clk *rx_l1_sync_clk;
+ struct clk *tx_l1_sync_clk;
+ bool is_lane_clks_enabled;
+ bool sec_cfg_updated;
+};
+
+#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
+#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
+#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+
+#define MAX_PROP_NAME 32
+#define VDDA_PHY_MIN_UV 1000000
+#define VDDA_PHY_MAX_UV 1000000
+#define VDDA_PLL_MIN_UV 1800000
+#define VDDA_PLL_MAX_UV 1800000
+
+#endif /* UFS_QCOM_H_ */
diff --git a/include/linux/scsi/ufs/ufs.h b/include/linux/scsi/ufs/ufs.h
new file mode 100644
index 0000000..42c459a
--- /dev/null
+++ b/include/linux/scsi/ufs/ufs.h
@@ -0,0 +1,491 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufs.h
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@...sung.com>
+ * Vinayak Holikatti <h.vinayak@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define MAX_CDB_SIZE 16
+#define GENERAL_UPIU_REQUEST_SIZE 32
+#define QUERY_DESC_MAX_SIZE 255
+#define QUERY_DESC_MIN_SIZE 2
+#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
+ (sizeof(struct utp_upiu_header)))
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+ cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+ (byte1 << 8) | (byte0))
+/*
+ * UFS device may have standard LUs and LUN id could be from 0x00 to
+ * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
+ * UFS device may also have the Well Known LUs (also referred as W-LU)
+ * which again could be from 0x00 to 0x7F. For W-LUs, device only use
+ * the "Extended Addressing Format" which means the W-LUNs would be
+ * from 0xc100 (SCSI_W_LUN_BASE) onwards.
+ * This means max. LUN number reported from UFS device could be 0xC17F.
+ */
+#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F
+#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
+#define UFS_UPIU_WLUN_ID (1 << 7)
+#define UFS_UPIU_MAX_GENERAL_LUN 8
+
+/* Well known logical unit id in LUN field of UPIU */
+enum {
+ UFS_UPIU_REPORT_LUNS_WLUN = 0x81,
+ UFS_UPIU_UFS_DEVICE_WLUN = 0xD0,
+ UFS_UPIU_BOOT_WLUN = 0xB0,
+ UFS_UPIU_RPMB_WLUN = 0xC4,
+};
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+ UFS_ABORT_TASK = 0x01,
+ UFS_ABORT_TASK_SET = 0x02,
+ UFS_CLEAR_TASK_SET = 0x04,
+ UFS_LOGICAL_RESET = 0x08,
+ UFS_QUERY_TASK = 0x80,
+ UFS_QUERY_TASK_SET = 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+ UPIU_TRANSACTION_NOP_OUT = 0x00,
+ UPIU_TRANSACTION_COMMAND = 0x01,
+ UPIU_TRANSACTION_DATA_OUT = 0x02,
+ UPIU_TRANSACTION_TASK_REQ = 0x04,
+ UPIU_TRANSACTION_QUERY_REQ = 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+ UPIU_TRANSACTION_NOP_IN = 0x20,
+ UPIU_TRANSACTION_RESPONSE = 0x21,
+ UPIU_TRANSACTION_DATA_IN = 0x22,
+ UPIU_TRANSACTION_TASK_RSP = 0x24,
+ UPIU_TRANSACTION_READY_XFER = 0x31,
+ UPIU_TRANSACTION_QUERY_RSP = 0x36,
+ UPIU_TRANSACTION_REJECT_UPIU = 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+ UPIU_CMD_FLAGS_NONE = 0x00,
+ UPIU_CMD_FLAGS_WRITE = 0x20,
+ UPIU_CMD_FLAGS_READ = 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+ UPIU_TASK_ATTR_SIMPLE = 0x00,
+ UPIU_TASK_ATTR_ORDERED = 0x01,
+ UPIU_TASK_ATTR_HEADQ = 0x02,
+ UPIU_TASK_ATTR_ACA = 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+ UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01,
+ UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+ QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
+ QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+};
+
+/* Attribute idn for Query requests */
+enum attr_idn {
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
+ QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
+ QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
+ QUERY_ATTR_IDN_EE_STATUS = 0x0E,
+};
+
+/* Descriptor idn for Query requests */
+enum desc_idn {
+ QUERY_DESC_IDN_DEVICE = 0x0,
+ QUERY_DESC_IDN_CONFIGURAION = 0x1,
+ QUERY_DESC_IDN_UNIT = 0x2,
+ QUERY_DESC_IDN_RFU_0 = 0x3,
+ QUERY_DESC_IDN_INTERCONNECT = 0x4,
+ QUERY_DESC_IDN_STRING = 0x5,
+ QUERY_DESC_IDN_RFU_1 = 0x6,
+ QUERY_DESC_IDN_GEOMETRY = 0x7,
+ QUERY_DESC_IDN_POWER = 0x8,
+ QUERY_DESC_IDN_MAX,
+};
+
+enum desc_header_offset {
+ QUERY_DESC_LENGTH_OFFSET = 0x00,
+ QUERY_DESC_DESC_TYPE_OFFSET = 0x01,
+};
+
+enum ufs_desc_max_size {
+ QUERY_DESC_DEVICE_MAX_SIZE = 0x1F,
+ QUERY_DESC_CONFIGURAION_MAX_SIZE = 0x90,
+ QUERY_DESC_UNIT_MAX_SIZE = 0x23,
+ QUERY_DESC_INTERCONNECT_MAX_SIZE = 0x06,
+ /*
+ * Max. 126 UNICODE characters (2 bytes per character) plus 2 bytes
+ * of descriptor header.
+ */
+ QUERY_DESC_STRING_MAX_SIZE = 0xFE,
+ QUERY_DESC_GEOMETRY_MAZ_SIZE = 0x44,
+ QUERY_DESC_POWER_MAX_SIZE = 0x62,
+ QUERY_DESC_RFU_MAX_SIZE = 0x00,
+};
+
+/* Unit descriptor parameters offsets in bytes*/
+enum unit_desc_param {
+ UNIT_DESC_PARAM_LEN = 0x0,
+ UNIT_DESC_PARAM_TYPE = 0x1,
+ UNIT_DESC_PARAM_UNIT_INDEX = 0x2,
+ UNIT_DESC_PARAM_LU_ENABLE = 0x3,
+ UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4,
+ UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5,
+ UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6,
+ UNIT_DESC_PARAM_MEM_TYPE = 0x8,
+ UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9,
+ UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA,
+ UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB,
+ UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13,
+ UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17,
+ UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18,
+ UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20,
+ UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
+};
+
+/*
+ * Logical Unit Write Protect
+ * 00h: LU not write protected
+ * 01h: LU write protected when fPowerOnWPEn =1
+ * 02h: LU permanently write protected when fPermanentWPEn =1
+ */
+enum ufs_lu_wp_type {
+ UFS_LU_NO_WP = 0x00,
+ UFS_LU_POWER_ON_WP = 0x01,
+ UFS_LU_PERM_WP = 0x02,
+};
+
+/* bActiveICCLevel parameter current units */
+enum {
+ UFSHCD_NANO_AMP = 0,
+ UFSHCD_MICRO_AMP = 1,
+ UFSHCD_MILI_AMP = 2,
+ UFSHCD_AMP = 3,
+};
+
+#define POWER_DESC_MAX_SIZE 0x62
+#define POWER_DESC_MAX_ACTV_ICC_LVLS 16
+
+/* Attribute bActiveICCLevel parameter bit masks definitions */
+#define ATTR_ICC_LVL_UNIT_OFFSET 14
+#define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
+#define ATTR_ICC_LVL_VALUE_MASK 0x3FF
+
+/* Power descriptor parameters offsets in bytes */
+enum power_desc_param_offset {
+ PWR_DESC_LEN = 0x0,
+ PWR_DESC_TYPE = 0x1,
+ PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2,
+ PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22,
+ PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42,
+};
+
+/* Exception event mask values */
+enum {
+ MASK_EE_STATUS = 0xFFFF,
+ MASK_EE_URGENT_BKOPS = (1 << 2),
+};
+
+/* Background operation status */
+enum bkops_status {
+ BKOPS_STATUS_NO_OP = 0x0,
+ BKOPS_STATUS_NON_CRITICAL = 0x1,
+ BKOPS_STATUS_PERF_IMPACT = 0x2,
+ BKOPS_STATUS_CRITICAL = 0x3,
+ BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
+ UPIU_QUERY_OPCODE_NOP = 0x0,
+ UPIU_QUERY_OPCODE_READ_DESC = 0x1,
+ UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
+ UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
+ UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
+ UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
+ UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
+ UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
+ UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
+};
+
+/* Query response result code */
+enum {
+ QUERY_RESULT_SUCCESS = 0x00,
+ QUERY_RESULT_NOT_READABLE = 0xF6,
+ QUERY_RESULT_NOT_WRITEABLE = 0xF7,
+ QUERY_RESULT_ALREADY_WRITTEN = 0xF8,
+ QUERY_RESULT_INVALID_LENGTH = 0xF9,
+ QUERY_RESULT_INVALID_VALUE = 0xFA,
+ QUERY_RESULT_INVALID_SELECTOR = 0xFB,
+ QUERY_RESULT_INVALID_INDEX = 0xFC,
+ QUERY_RESULT_INVALID_IDN = 0xFD,
+ QUERY_RESULT_INVALID_OPCODE = 0xFE,
+ QUERY_RESULT_GENERAL_FAILURE = 0xFF,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+ UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
+ UPIU_COMMAND_SET_TYPE_UFS = 0x1,
+ UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET 28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET 8
+
+enum {
+ MASK_SCSI_STATUS = 0xFF,
+ MASK_TASK_RESPONSE = 0xFF00,
+ MASK_RSP_UPIU_RESULT = 0xFFFF,
+ MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_EXCEPTION_EVENT = 0x10000,
+};
+
+/* Task management service response */
+enum {
+ UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
+ UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+ UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
+ UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
+ UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+ UFS_ACTIVE_PWR_MODE = 1,
+ UFS_SLEEP_PWR_MODE = 2,
+ UFS_POWERDOWN_PWR_MODE = 3,
+};
+
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+ __be32 dword_0;
+ __be32 dword_1;
+ __be32 dword_2;
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+ __be32 exp_data_transfer_len;
+ u8 cdb[MAX_CDB_SIZE];
+};
+
+/**
+ * struct utp_upiu_query - upiu request buffer structure for
+ * query request.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @reserved_osf: spec reserved field B-4,5
+ * @length: number of descriptor bytes to read/write B-6,7
+ * @value: Attribute value to be written DW-5
+ * @reserved: spec reserved DW-6,7
+ */
+struct utp_upiu_query {
+ u8 opcode;
+ u8 idn;
+ u8 index;
+ u8 selector;
+ __be16 reserved_osf;
+ __be16 length;
+ __be32 value;
+ __be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_req - general upiu request structure
+ * @header:UPIU header structure DW-0 to DW-2
+ * @sc: fields structure for scsi command DW-3 to DW-7
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_req {
+ struct utp_upiu_header header;
+ union {
+ struct utp_upiu_cmd sc;
+ struct utp_upiu_query qr;
+ };
+};
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+ __be32 residual_transfer_count;
+ __be32 reserved[4];
+ __be16 sense_data_len;
+ u8 sense_data[18];
+};
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+ struct utp_upiu_header header;
+ union {
+ struct utp_cmd_rsp sr;
+ struct utp_upiu_query qr;
+ };
+};
+
+/**
+ * struct utp_upiu_task_req - Task request UPIU structure
+ * @header - UPIU header structure DW0 to DW-2
+ * @input_param1: Input parameter 1 DW-3
+ * @input_param2: Input parameter 2 DW-4
+ * @input_param3: Input parameter 3 DW-5
+ * @reserved: Reserved double words DW-6 to DW-7
+ */
+struct utp_upiu_task_req {
+ struct utp_upiu_header header;
+ __be32 input_param1;
+ __be32 input_param2;
+ __be32 input_param3;
+ __be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_task_rsp - Task Management Response UPIU structure
+ * @header: UPIU header structure DW0-DW-2
+ * @output_param1: Ouput parameter 1 DW3
+ * @output_param2: Output parameter 2 DW4
+ * @reserved: Reserved double words DW-5 to DW-7
+ */
+struct utp_upiu_task_rsp {
+ struct utp_upiu_header header;
+ __be32 output_param1;
+ __be32 output_param2;
+ __be32 reserved[3];
+};
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+ u8 query_func;
+ struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+ u8 response;
+ struct utp_upiu_query upiu_res;
+};
+
+#define UFS_VREG_VCC_MIN_UV 2700000 /* uV */
+#define UFS_VREG_VCC_MAX_UV 3600000 /* uV */
+#define UFS_VREG_VCC_1P8_MIN_UV 1700000 /* uV */
+#define UFS_VREG_VCC_1P8_MAX_UV 1950000 /* uV */
+#define UFS_VREG_VCCQ_MIN_UV 1100000 /* uV */
+#define UFS_VREG_VCCQ_MAX_UV 1300000 /* uV */
+#define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */
+#define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */
+
+/*
+ * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
+ * and link is in Hibern8 state.
+ */
+#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */
+
+struct ufs_vreg {
+ struct regulator *reg;
+ const char *name;
+ bool enabled;
+ int min_uV;
+ int max_uV;
+ int min_uA;
+ int max_uA;
+};
+
+struct ufs_vreg_info {
+ struct ufs_vreg *vcc;
+ struct ufs_vreg *vccq;
+ struct ufs_vreg *vccq2;
+ struct ufs_vreg *vdd_hba;
+};
+
+struct ufs_dev_info {
+ bool f_power_on_wp_en;
+ /* Keeps information if any of the LU is power on write protected */
+ bool is_lu_power_on_wp;
+};
+
+#endif /* End of Header */
diff --git a/include/linux/scsi/ufs/ufshcd.h
b/include/linux/scsi/ufs/ufshcd.h
new file mode 100644
index 0000000..51304f7
--- /dev/null
+++ b/include/linux/scsi/ufs/ufshcd.h
@@ -0,0 +1,635 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.h
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@...sung.com>
+ * Vinayak Holikatti <h.vinayak@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "ufs.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.2"
+
+struct ufs_hba;
+
+/**
+ * readl_poll_timeout - Periodically poll an address until a condition is
met or a timeout occurs
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops)
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val. Must not
+ * be called from atomic context if sleep_us or timeout_us are used.
+ */
+#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
+({ \
+ ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+ might_sleep_if(timeout_us); \
+ for (;;) { \
+ (val) = readl(addr); \
+ if (cond) \
+ break; \
+ if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
\
+ (val) = readl(addr); \
+ break; \
+ } \
+ if (sleep_us) \
+ usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+enum dev_cmd_type {
+ DEV_CMD_TYPE_NOP = 0x0,
+ DEV_CMD_TYPE_QUERY = 0x1,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ * @done: UIC command completion
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+ struct completion done;
+};
+
+/* Used to differentiate the power management options */
+enum ufs_pm_op {
+ UFS_RUNTIME_PM,
+ UFS_SYSTEM_PM,
+ UFS_SHUTDOWN_PM,
+};
+
+#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM)
+#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM)
+#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM)
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+ UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
+ UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
+ UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
+};
+
+#define ufshcd_is_link_off(hba) ((hba)->uic_link_state ==
UIC_LINK_OFF_STATE)
+#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
+ UIC_LINK_HIBERN8_STATE)
+#define ufshcd_set_link_off(hba) ((hba)->uic_link_state =
UIC_LINK_OFF_STATE)
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
+ UIC_LINK_HIBERN8_STATE)
+
+/*
+ * UFS Power management levels.
+ * Each level is in increasing order of power savings.
+ */
+enum ufs_pm_level {
+ UFS_PM_LVL_0, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+ UFS_PM_LVL_1, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_2, /* UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+ UFS_PM_LVL_3, /* UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_4, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_5, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE */
+ UFS_PM_LVL_MAX
+};
+
+struct ufs_pm_lvl_states {
+ enum ufs_dev_pwr_mode dev_state;
+ enum uic_link_state link_state;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_req_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ * @intr_cmd: Interrupt command (doesn't participate in interrupt
aggregation)
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_req *ucd_req_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ struct scsi_cmnd *cmd;
+ u8 *sense_buffer;
+ unsigned int sense_bufflen;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ u8 lun; /* UPIU LUN id field is only 8-bit wide */
+ bool intr_cmd;
+};
+
+/**
+ * struct ufs_query - holds relevent data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+ struct ufs_query_req request;
+ u8 *descriptor;
+ struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management
commands
+ * @type: device management command type - Query, NOP OUT
+ * @lock: lock to allow one command at a time
+ * @complete: internal commands completion
+ * @tag_wq: wait queue until free command slot is available
+ */
+struct ufs_dev_cmd {
+ enum dev_cmd_type type;
+ struct mutex lock;
+ struct completion *complete;
+ wait_queue_head_t tag_wq;
+ struct ufs_query query;
+};
+
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @min_freq: min frequency that can be used for clock scaling
+ * @curr_freq: indicates the current frequency that it is set to
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+ struct list_head list;
+ struct clk *clk;
+ const char *name;
+ u32 max_freq;
+ u32 min_freq;
+ u32 curr_freq;
+ bool enabled;
+};
+
+#define PRE_CHANGE 0
+#define POST_CHANGE 1
+
+struct ufs_pa_layer_attr {
+ u32 gear_rx;
+ u32 gear_tx;
+ u32 lane_rx;
+ u32 lane_tx;
+ u32 pwr_rx;
+ u32 pwr_tx;
+ u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+ bool is_valid;
+ struct ufs_pa_layer_attr info;
+};
+
+/**
+ * struct ufs_hba_variant_ops - variant specific callbacks
+ * @name: variant name
+ * @init: called when the driver is initialized
+ * @exit: called to cleanup everything done in init
+ * @clk_scale_notify: notifies that clks are scaled up/down
+ * @setup_clocks: called before touching any of the controller registers
+ * @setup_regulators: called before accessing the host controller
+ * @hce_enable_notify: called before and after HCE enable bit is set to
allow
+ * variant specific Uni-Pro initialization.
+ * @link_startup_notify: called before and after Link startup is carried
out
+ * to allow variant specific Uni-Pro initialization.
+ * @pwr_change_notify: called before and after a power mode change
+ * is carried out to allow vendor spesific capabilities
+ * to be set.
+ * @suspend: called during host controller PM callback
+ * @resume: called during host controller PM callback
+ */
+struct ufs_hba_variant_ops {
+ const char *name;
+ int (*init)(struct ufs_hba *);
+ void (*exit)(struct ufs_hba *);
+ void (*clk_scale_notify)(struct ufs_hba *);
+ int (*setup_clocks)(struct ufs_hba *, bool);
+ int (*setup_regulators)(struct ufs_hba *, bool);
+ int (*hce_enable_notify)(struct ufs_hba *, bool);
+ int (*link_startup_notify)(struct ufs_hba *, bool);
+ int (*pwr_change_notify)(struct ufs_hba *,
+ bool, struct ufs_pa_layer_attr *,
+ struct ufs_pa_layer_attr *);
+ int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
+ int (*resume)(struct ufs_hba *, enum ufs_pm_op);
+};
+
+/* clock gating state */
+enum clk_gating_state {
+ CLKS_OFF,
+ CLKS_ON,
+ REQ_CLKS_OFF,
+ REQ_CLKS_ON,
+};
+
+/**
+ * struct ufs_clk_gating - UFS clock gating related info
+ * @gate_work: worker to turn off clocks after some delay as specified in
+ * delay_ms
+ * @ungate_work: worker to turn on clocks that will be used in case of
+ * interrupt context
+ * @state: the current clocks state
+ * @delay_ms: gating delay in ms
+ * @is_suspended: clk gating is suspended when set to 1 which can be used
+ * during suspend/resume
+ * @delay_attr: sysfs attribute to control delay_attr
+ * @active_reqs: number of requests that are pending and should be waited
for
+ * completion before gating clocks.
+ */
+struct ufs_clk_gating {
+ struct delayed_work gate_work;
+ struct work_struct ungate_work;
+ enum clk_gating_state state;
+ unsigned long delay_ms;
+ bool is_suspended;
+ struct device_attribute delay_attr;
+ int active_reqs;
+};
+
+struct ufs_clk_scaling {
+ ktime_t busy_start_t;
+ bool is_busy_started;
+ unsigned long tot_busy_t;
+ unsigned long window_start_t;
+};
+
+/**
+ * struct ufs_init_prefetch - contains data that is pre-fetched once during
+ * initialization
+ * @icc_level: icc level which was read during initialization
+ */
+struct ufs_init_prefetch {
+ u32 icc_level;
+};
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @lrb: local reference block
+ * @lrb_in_use: lrb in use
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @ufs_version: UFS Version to which controller complies
+ * @vops: pointer to variant specific operations
+ * @priv: pointer to variant specific private data
+ * @irq: Irq number of the controller
+ * @active_uic_cmd: handle of active UIC command
+ * @uic_cmd_mutex: mutex for uic command
+ * @tm_wq: wait queue for task management
+ * @tm_tag_wq: wait queue for free task management slots
+ * @tm_slots_in_use: bit map of task management request slots in use
+ * @pwr_done: completion for power mode change
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @eh_flags: Error handling flags
+ * @intr_mask: Interrupt Mask Bits
+ * @ee_ctrl_mask: Exception event control mask
+ * @is_powered: flag to check if HBA is powered
+ * @is_init_prefetch: flag to check if data was pre-fetched in
initialization
+ * @init_prefetch_data: data pre-fetched during initialization
+ * @eh_work: Worker to handle UFS errors that require s/w attention
+ * @eeh_work: Worker to handle exception events
+ * @errors: HBA errors
+ * @uic_error: UFS interconnect layer error status
+ * @saved_err: sticky error mask
+ * @saved_uic_err: sticky UIC error mask
+ * @dev_cmd: ufs device management command information
+ * @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
+ * @pwr_info: holds current power mode
+ * @max_pwr_info: keeps the device max valid pwm
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct device *dev;
+ /*
+ * This field is to keep a reference to "scsi_device" corresponding
to
+ * "UFS device" W-LU.
+ */
+ struct scsi_device *sdev_ufs_device;
+ enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+ enum uic_link_state uic_link_state;
+ /* Desired UFS power management level during runtime PM */
+ enum ufs_pm_level rpm_lvl;
+ /* Desired UFS power management level during system PM */
+ enum ufs_pm_level spm_lvl;
+ int pm_op_in_progress;
+
+ struct ufshcd_lrb *lrb;
+ unsigned long lrb_in_use;
+
+ unsigned long outstanding_tasks;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ u32 ufs_version;
+ struct ufs_hba_variant_ops *vops;
+ void *priv;
+ unsigned int irq;
+ bool is_irq_enabled;
+
+ /* Interrupt aggregation support is broken */
+ #define UFSHCD_QUIRK_BROKEN_INTR_AGGR UFS_BIT(0)
+
+ /*
+ * delay before each dme command is required as the unipro
+ * layer has shown instabilities
+ */
+ #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS UFS_BIT(1)
+
+ /*
+ * If UFS host controller is having issue in processing LCC (Line
+ * Control Command) coming from device then enable this quirk.
+ * When this quirk is enabled, host controller driver should disable
+ * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+ * attribute of device to 0).
+ */
+ #define UFSHCD_QUIRK_BROKEN_LCC UFS_BIT(2)
+
+ /*
+ * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+ * inbound Link supports unterminated line in HS mode. Setting this
+ * attribute to 1 fixes moving to HS gear.
+ */
+ #define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP UFS_BIT(3)
+
+ unsigned int quirks; /* Deviations from standard UFSHCI spec. */
+
+ wait_queue_head_t tm_wq;
+ wait_queue_head_t tm_tag_wq;
+ unsigned long tm_condition;
+ unsigned long tm_slots_in_use;
+
+ struct uic_command *active_uic_cmd;
+ struct mutex uic_cmd_mutex;
+ struct completion *uic_async_done;
+
+ u32 ufshcd_state;
+ u32 eh_flags;
+ u32 intr_mask;
+ u16 ee_ctrl_mask;
+ bool is_powered;
+ bool is_init_prefetch;
+ struct ufs_init_prefetch init_prefetch_data;
+
+ /* Work Queues */
+ struct work_struct eh_work;
+ struct work_struct eeh_work;
+
+ /* HBA Errors */
+ u32 errors;
+ u32 uic_error;
+ u32 saved_err;
+ u32 saved_uic_err;
+
+ /* Device management request data */
+ struct ufs_dev_cmd dev_cmd;
+
+ /* Keeps information of the UFS device connected to this host */
+ struct ufs_dev_info dev_info;
+ bool auto_bkops_enabled;
+ struct ufs_vreg_info vreg_info;
+ struct list_head clk_list_head;
+
+ bool wlun_dev_clr_ua;
+
+ struct ufs_pa_layer_attr pwr_info;
+ struct ufs_pwr_mode_info max_pwr_info;
+
+ struct ufs_clk_gating clk_gating;
+ /* Control to enable/disable host capabilities */
+ u32 caps;
+ /* Allow dynamic clk gating */
+#define UFSHCD_CAP_CLK_GATING (1 << 0)
+ /* Allow hiberb8 with clk gating */
+#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
+ /* Allow dynamic clk scaling */
+#define UFSHCD_CAP_CLK_SCALING (1 << 2)
+ /* Allow auto bkops to enabled during runtime suspend */
+#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
+
+ struct devfreq *devfreq;
+ struct ufs_clk_scaling clk_scaling;
+ bool is_sys_suspended;
+};
+
+/* Returns true if clocks can be gated. Otherwise false */
+static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_CLK_GATING;
+}
+static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+}
+static inline int ufshcd_is_clkscaling_enabled(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_CLK_SCALING;
+}
+static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+}
+
+#define ufshcd_writel(hba, val, reg) \
+ writel((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg) \
+ readl((hba)->mmio_base + (reg))
+
+/**
+ * ufshcd_rmwl - read modify write into a register
+ * @hba - per adapter instance
+ * @mask - mask to apply on read value
+ * @val - actual value to write
+ * @reg - register address
+ */
+static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32
reg)
+{
+ u32 tmp;
+
+ tmp = ufshcd_readl(hba, reg);
+ tmp &= ~mask;
+ tmp |= (val & mask);
+ ufshcd_writel(hba, tmp, reg);
+}
+
+int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
+void ufshcd_remove(struct ufs_hba *);
+
+extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
+extern int ufshcd_runtime_resume(struct ufs_hba *hba);
+extern int ufshcd_runtime_idle(struct ufs_hba *hba);
+extern int ufshcd_system_suspend(struct ufs_hba *hba);
+extern int ufshcd_system_resume(struct ufs_hba *hba);
+extern int ufshcd_shutdown(struct ufs_hba *hba);
+extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+ u8 attr_set, u32 mib_val, u8 peer);
+extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer);
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL 0
+#define DME_PEER 1
+#define ATTR_SET_NOR 0 /* NORMAL */
+#define ATTR_SET_ST 1 /* STATIC */
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+int ufshcd_hold(struct ufs_hba *hba, bool async);
+void ufshcd_release(struct ufs_hba *hba);
+#endif /* End of Header */
diff --git a/include/linux/scsi/ufs/unipro.h
b/include/linux/scsi/ufs/unipro.h
new file mode 100644
index 0000000..3fc3e21
--- /dev/null
+++ b/include/linux/scsi/ufs/unipro.h
@@ -0,0 +1,207 @@
+/*
+ * drivers/scsi/ufs/unipro.h
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * M-TX Configuration Attributes
+ */
+#define TX_MODE 0x0021
+#define TX_HSRATE_SERIES 0x0022
+#define TX_HSGEAR 0x0023
+#define TX_PWMGEAR 0x0024
+#define TX_AMPLITUDE 0x0025
+#define TX_HS_SLEWRATE 0x0026
+#define TX_SYNC_SOURCE 0x0027
+#define TX_HS_SYNC_LENGTH 0x0028
+#define TX_HS_PREPARE_LENGTH 0x0029
+#define TX_LS_PREPARE_LENGTH 0x002A
+#define TX_HIBERN8_CONTROL 0x002B
+#define TX_LCC_ENABLE 0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
+#define TX_BYPASS_8B10B_ENABLE 0x002E
+#define TX_DRIVER_POLARITY 0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
+#define TX_LCC_SEQUENCER 0x0032
+#define TX_MIN_ACTIVATETIME 0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE 0x00A1
+#define RX_HSRATE_SERIES 0x00A2
+#define RX_HSGEAR 0x00A3
+#define RX_PWMGEAR 0x00A4
+#define RX_LS_TERMINATED_ENABLE 0x00A5
+#define RX_HS_UNTERMINATED_ENABLE 0x00A6
+#define RX_ENTER_HIBERN8 0x00A7
+#define RX_BYPASS_8B10B_ENABLE 0x00A8
+#define RX_TERMINATION_FORCE_ENABLE 0x0089
+
+#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+/*
+ * PHY Adpater attributes
+ */
+#define PA_ACTIVETXDATALANES 0x1560
+#define PA_ACTIVERXDATALANES 0x1580
+#define PA_TXTRAILINGCLOCKS 0x1564
+#define PA_PHY_TYPE 0x1500
+#define PA_AVAILTXDATALANES 0x1520
+#define PA_AVAILRXDATALANES 0x1540
+#define PA_MINRXTRAILINGCLOCKS 0x1543
+#define PA_TXPWRSTATUS 0x1567
+#define PA_RXPWRSTATUS 0x1582
+#define PA_TXFORCECLOCK 0x1562
+#define PA_TXPWRMODE 0x1563
+#define PA_LEGACYDPHYESCDL 0x1570
+#define PA_MAXTXSPEEDFAST 0x1521
+#define PA_MAXTXSPEEDSLOW 0x1522
+#define PA_MAXRXSPEEDFAST 0x1541
+#define PA_MAXRXSPEEDSLOW 0x1542
+#define PA_TXLINKSTARTUPHS 0x1544
+#define PA_TXSPEEDFAST 0x1565
+#define PA_TXSPEEDSLOW 0x1566
+#define PA_REMOTEVERINFO 0x15A0
+#define PA_TXGEAR 0x1568
+#define PA_TXTERMINATION 0x1569
+#define PA_HSSERIES 0x156A
+#define PA_PWRMODE 0x1571
+#define PA_RXGEAR 0x1583
+#define PA_RXTERMINATION 0x1584
+#define PA_MAXRXPWMGEAR 0x1586
+#define PA_MAXRXHSGEAR 0x1587
+#define PA_RXHSUNTERMCAP 0x15A5
+#define PA_RXLSTERMCAP 0x15A6
+#define PA_PACPREQTIMEOUT 0x1590
+#define PA_PACPREQEOBTIMEOUT 0x1591
+#define PA_HIBERN8TIME 0x15A7
+#define PA_LOCALVERINFO 0x15A9
+#define PA_TACTIVATE 0x15A8
+#define PA_PACPFRAMECOUNT 0x15C0
+#define PA_PACPERRORCOUNT 0x15C1
+#define PA_PHYTESTCONTROL 0x15C2
+#define PA_PWRMODEUSERDATA0 0x15B0
+#define PA_PWRMODEUSERDATA1 0x15B1
+#define PA_PWRMODEUSERDATA2 0x15B2
+#define PA_PWRMODEUSERDATA3 0x15B3
+#define PA_PWRMODEUSERDATA4 0x15B4
+#define PA_PWRMODEUSERDATA5 0x15B5
+#define PA_PWRMODEUSERDATA6 0x15B6
+#define PA_PWRMODEUSERDATA7 0x15B7
+#define PA_PWRMODEUSERDATA8 0x15B8
+#define PA_PWRMODEUSERDATA9 0x15B9
+#define PA_PWRMODEUSERDATA10 0x15BA
+#define PA_PWRMODEUSERDATA11 0x15BB
+#define PA_CONNECTEDTXDATALANES 0x1561
+#define PA_CONNECTEDRXDATALANES 0x1581
+#define PA_LOGICALLANEMAP 0x15A1
+#define PA_SLEEPNOCONFIGTIME 0x15A2
+#define PA_STALLNOCONFIGTIME 0x15A3
+#define PA_SAVECONFIGTIME 0x15A4
+
+/* PA power modes */
+enum {
+ FAST_MODE = 1,
+ SLOW_MODE = 2,
+ FASTAUTO_MODE = 4,
+ SLOWAUTO_MODE = 5,
+ UNCHANGED = 7,
+};
+
+/* PA TX/RX Frequency Series */
+enum {
+ PA_HS_MODE_A = 1,
+ PA_HS_MODE_B = 2,
+};
+
+enum ufs_pwm_gear_tag {
+ UFS_PWM_DONT_CHANGE, /* Don't change Gear */
+ UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
+ UFS_PWM_G2, /* PWM Gear 2 */
+ UFS_PWM_G3, /* PWM Gear 3 */
+ UFS_PWM_G4, /* PWM Gear 4 */
+ UFS_PWM_G5, /* PWM Gear 5 */
+ UFS_PWM_G6, /* PWM Gear 6 */
+ UFS_PWM_G7, /* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+ UFS_HS_DONT_CHANGE, /* Don't change Gear */
+ UFS_HS_G1, /* HS Gear 1 (default for reset) */
+ UFS_HS_G2, /* HS Gear 2 */
+ UFS_HS_G3, /* HS Gear 3 */
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD 0x2040
+#define DL_FC0PROTTIMEOUTVAL 0x2041
+#define DL_TC0REPLAYTIMEOUTVAL 0x2042
+#define DL_AFC0REQTIMEOUTVAL 0x2043
+#define DL_AFC0CREDITTHRESHOLD 0x2044
+#define DL_TC0OUTACKTHRESHOLD 0x2045
+#define DL_TC1TXFCTHRESHOLD 0x2060
+#define DL_FC1PROTTIMEOUTVAL 0x2061
+#define DL_TC1REPLAYTIMEOUTVAL 0x2062
+#define DL_AFC1REQTIMEOUTVAL 0x2063
+#define DL_AFC1CREDITTHRESHOLD 0x2064
+#define DL_TC1OUTACKTHRESHOLD 0x2065
+#define DL_TXPREEMPTIONCAP 0x2000
+#define DL_TC0TXMAXSDUSIZE 0x2001
+#define DL_TC0RXINITCREDITVAL 0x2002
+#define DL_TC0TXBUFFERSIZE 0x2005
+#define DL_PEERTC0PRESENT 0x2046
+#define DL_PEERTC0RXINITCREVAL 0x2047
+#define DL_TC1TXMAXSDUSIZE 0x2003
+#define DL_TC1RXINITCREDITVAL 0x2004
+#define DL_TC1TXBUFFERSIZE 0x2006
+#define DL_PEERTC1PRESENT 0x2066
+#define DL_PEERTC1RXINITCREVAL 0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID 0x3000
+#define N_DEVICEID_VALID 0x3001
+#define N_TC0TXMAXSDUSIZE 0x3020
+#define N_TC1TXMAXSDUSIZE 0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS 0x4000
+#define T_NUMTESTFEATURES 0x4001
+#define T_CONNECTIONSTATE 0x4020
+#define T_PEERDEVICEID 0x4021
+#define T_PEERCPORTID 0x4022
+#define T_TRAFFICCLASS 0x4023
+#define T_PROTOCOLID 0x4024
+#define T_CPORTFLAGS 0x4025
+#define T_TXTOKENVALUE 0x4026
+#define T_RXTOKENVALUE 0x4027
+#define T_LOCALBUFFERSPACE 0x4028
+#define T_PEERBUFFERSPACE 0x4029
+#define T_CREDITSTOSEND 0x402A
+#define T_CPORTMODE 0x402B
+#define T_TC0TXMAXSDUSIZE 0x4060
+#define T_TC1TXMAXSDUSIZE 0x4061
+
+/* Boolean attribute values */
+enum {
+ FALSE = 0,
+ TRUE,
+};
+
+#endif /* _UNIPRO_H_ */
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists