| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140917175244.GC7983@leverpostej>
Date: Wed, 17 Sep 2014 18:52:44 +0100
From: Mark Rutland <mark.rutland@....com>
To: Robin Gong <b38343@...escale.com>
Cc: "robh+dt@...nel.org" <robh+dt@...nel.org>,
Pawel Moll <Pawel.Moll@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"shawn.guo@...escale.com" <shawn.guo@...escale.com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"sre@...nel.org" <sre@...nel.org>,
"dbaryshkov@...il.com" <dbaryshkov@...il.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"grant.likely@...aro.org" <grant.likely@...aro.org>,
"linux@....linux.org.uk" <linux@....linux.org.uk>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 2/3] power: reset: imx-snvs-poweroff: add power off
driver for i.mx6
On Wed, Sep 17, 2014 at 10:57:59AM +0100, Robin Gong wrote:
> This driver register pm_power_off with snvs power off function. If
> your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use
> other pin to do, please disable the driver in dts, otherwise, your
> pm_power_off maybe overwrote by this driver.
>
> Signed-off-by: Robin Gong <b38343@...escale.com>
> ---
> .../bindings/power_supply/imx-snvs-poweroff.txt | 23 +++++++
> drivers/power/reset/Kconfig | 9 +++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/imx-snvs-poweroff.c | 66 ++++++++++++++++++++
> 4 files changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> create mode 100644 drivers/power/reset/imx-snvs-poweroff.c
>
> diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> new file mode 100644
> index 0000000..6caf64e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> @@ -0,0 +1,23 @@
> +i.mx6 Poweroff Driver
> +
> +SNVS_LPCR in SNVS module can power off the whole system by pull
> +PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
> +If you don't want to use PMIC_ON_REQ as power on/off control,
> +please set status='disabled' to disable this driver.
> +
> +Required Properties:
> +-compatible: "fsl,sec-v4.0-poweroff"
> +-reg: Specifies the physical address of the SNVS_LPCR register
As you describe above, this is part of the SNVS module. So why does this
need a separate node?
Surely there should just be a property on the SNVS node that desribers
whether or not this can be used?
Mark.
> +
> +Example:
> + snvs@...cc000 {
> + compatible = "fsl,sec-v4.0-mon", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x020cc000 0x4000>;
> + .....
> + snvs-poweroff@38 {
> + compatible = "fsl,sec-v4.0-poweroff";
> + reg = <0x38 0x4>;
> + };
> + }
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index ca41523..b26c547 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -45,6 +45,15 @@ config POWER_RESET_HISI
> help
> Reboot support for Hisilicon boards.
>
> +config POWER_RESET_IMX
> + bool "IMX6 power-off driver"
> + depends on POWER_RESET && SOC_IMX6
> + help
> + This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
> + boards.If you want to use other pin to control external power,please
> + say N here or disable in dts to make sure pm_power_off never be
> + overwrote wrongly by this driver.
> +
> config POWER_RESET_MSM
> bool "Qualcomm MSM power-off driver"
> depends on POWER_RESET && ARCH_QCOM
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index a42e70e..2524daf 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
> diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
> new file mode 100644
> index 0000000..d726ac4
> --- /dev/null
> +++ b/drivers/power/reset/imx-snvs-poweroff.c
> @@ -0,0 +1,66 @@
> +/* Power off driver for i.mx6
> + * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved.
> + *
> + * based on msm-poweroff.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +static void __iomem *snvs_base;
> +
> +static void do_imx_poweroff(void)
> +{
> + u32 value = readl(snvs_base);
> +
> + /* set TOP and DP_EN bit */
> + writel(value | 0x60, snvs_base);
> +}
> +
> +static int imx_poweroff_probe(struct platform_device *pdev)
> +{
> + snvs_base = of_iomap(pdev->dev.of_node, 0);
> + if (!snvs_base) {
> + dev_err(&pdev->dev, "failed to get memory\n");
> + return -EIO;
> + }
> +
> + pm_power_off = do_imx_poweroff;
> + return 0;
> +}
> +
> +static const struct of_device_id of_imx_poweroff_match[] = {
> + { .compatible = "fsl,sec-v4.0-poweroff", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
> +
> +static struct platform_driver imx_poweroff_driver = {
> + .probe = imx_poweroff_probe,
> + .driver = {
> + .name = "imx-snvs-poweroff",
> + .of_match_table = of_match_ptr(of_imx_poweroff_match),
> + },
> +};
> +
> +static int __init imx_poweroff_init(void)
> +{
> + return platform_driver_register(&imx_poweroff_driver);
> +}
> +device_initcall(imx_poweroff_init);
> --
> 1.7.9.5
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists