| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <541A0910.90806@gmx.de>
Date: Thu, 18 Sep 2014 00:20:00 +0200
From: Hartmut Knaack <knaack.h@....de>
To: Jacob Pan <jacob.jun.pan@...ux.intel.com>,
IIO <linux-iio@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
DEVICE TREE <devicetree@...r.kernel.org>,
Lee Jones <lee.jones@...aro.org>
CC: Carlo Caione <carlo@...one.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Aaron Lu <aaron.lu@...el.com>, Alan Cox <alan@...ux.intel.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Grant Likely <grant.likely@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Fugang Duan <B38611@...escale.com>,
Arnd Bergmann <arnd@...db.de>,
Zubair Lutfullah <zubair.lutfullah@...il.com>,
Sebastian Reichel <sre@...ian.org>,
Johannes Thumshirn <johannes.thumshirn@....de>,
Philippe Reynes <tremyfr@...oo.fr>,
Angelo Compagnucci <angelo.compagnucci@...il.com>,
Doug Anderson <dianders@...omium.org>,
Ramakrishna Pallala <ramakrishna.pallala@...el.com>,
Peter Meerwald <pmeerw@...erw.net>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Rafael Wysocki <rafael.j.wysocki@...el.com>
Subject: Re: [PATCH v4 2/3] iio/adc: add support for axp288 adc
Jacob Pan schrieb, Am 17.09.2014 02:11:
> Platform driver for X-Powers AXP288 ADC, which is a sub-device of the
> customized AXP288 PMIC for Intel Baytrail-CR platforms. GPADC device
> enumerates as one of the MFD cell devices. It uses IIO infrastructure
> to communicate with userspace and consumer drivers.
>
> Usages of ADC channels include battery charging and thermal sensors.
>
You are progressing, but still a few issues left. One thing is indentation in some places (I feel like being pretty annoying about this), others are commented in line.
> Based on initial work by:
> Ramakrishna Pallala <ramakrishna.pallala@...el.com>
>
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> ---
> drivers/iio/adc/Kconfig | 8 ++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/axp288_adc.c | 254 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 263 insertions(+)
> create mode 100644 drivers/iio/adc/axp288_adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 11b048a..db2681b 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -127,6 +127,14 @@ config AT91_ADC
> help
> Say yes here to build support for Atmel AT91 ADC.
>
> +config AXP288_ADC
> + tristate "X-Powers AXP288 ADC driver"
> + depends on MFD_AXP20X
> + help
> + Say yes here to have support for X-Powers power management IC (PMIC) ADC
> + device. Depending on platform configuration, this general purpose ADC can
> + be used for sampling sensors such as thermal resistors.
> +
> config EXYNOS_ADC
> tristate "Exynos ADC driver support"
> depends on ARCH_EXYNOS || (OF && COMPILE_TEST)
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index ad81b51..19640f9 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
> obj-$(CONFIG_AD7887) += ad7887.o
> obj-$(CONFIG_AD799X) += ad799x.o
> obj-$(CONFIG_AT91_ADC) += at91_adc.o
> +obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
> obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> obj-$(CONFIG_MAX1027) += max1027.o
> diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
> new file mode 100644
> index 0000000..333c624
> --- /dev/null
> +++ b/drivers/iio/adc/axp288_adc.c
> @@ -0,0 +1,254 @@
> +/*
> + * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
> + *
> + * Copyright (C) 2014 Intel Corporation
> + *
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/driver.h>
> +
> +#define AXP288_ADC_EN_MASK 0xF1
> +#define AXP288_ADC_TS_PIN_GPADC 0xF2
> +#define AXP288_ADC_TS_PIN_ON 0xF3
> +
> +enum axp288_adc_id {
> + AXP288_ADC_TS,
> + AXP288_ADC_PMIC,
> + AXP288_ADC_GP,
> + AXP288_ADC_BATT_CHRG_I,
> + AXP288_ADC_BATT_DISCHRG_I,
> + AXP288_ADC_BATT_V,
> + AXP288_ADC_NR_CHAN,
> +};
> +
> +struct axp288_adc_info {
> + int irq;
> + struct device *dev;
> + struct regmap *regmap;
> +};
> +
> +static const struct iio_chan_spec const axp288_adc_channels[] = {
> + {
> + .indexed = 1,
> + .type = IIO_TEMP,
> + .channel = 0,
> + .address = AXP288_TS_ADC_H,
> + .datasheet_name = "CH0",
> + }, {
> + .indexed = 1,
> + .type = IIO_TEMP,
> + .channel = 1,
> + .address = AXP288_PMIC_ADC_H,
> + .datasheet_name = "CH1",
> + }, {
> + .indexed = 1,
> + .type = IIO_TEMP,
> + .channel = 2,
> + .address = AXP288_GP_ADC_H,
> + .datasheet_name = "CH2",
> + }, {
> + .indexed = 1,
> + .type = IIO_CURRENT,
> + .channel = 3,
> + .address = AXP20X_BATT_CHRG_I_H,
> + .datasheet_name = "CH3",
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + }, {
> + .indexed = 1,
> + .type = IIO_CURRENT,
> + .channel = 4,
> + .address = AXP20X_BATT_DISCHRG_I_H,
> + .datasheet_name = "CH4",
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + }, {
> + .indexed = 1,
> + .type = IIO_VOLTAGE,
> + .channel = 5,
> + .address = AXP20X_BATT_V_H,
> + .datasheet_name = "CH5",
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + },
> +};
> +
> +#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
> + _consumer_channel) \
> + { \
> + .adc_channel_label = _adc_channel_label, \
> + .consumer_dev_name = _consumer_dev_name, \
> + .consumer_channel = _consumer_channel, \
> + }
> +
> +/* for consumer drivers */
> +static struct iio_map axp288_adc_default_maps[] = {
> + AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
> + AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
> + AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
> + AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
> + AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
> + AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
> + {},
> +};
> +
> +static int axp288_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret;
> + struct axp288_adc_info *info = iio_priv(indio_dev);
> + u8 buf[2];
You could use __be16 instead. Then you just need to use be16_to_cpu(), shift 4 bits to the right and mask the result with 0xFF.
> +
> + mutex_lock(&indio_dev->mlock);
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + /* special case for GPADC sample */
> + if (chan->address == AXP288_GP_ADC_H) {
> + ret = regmap_write(info->regmap, AXP288_ADC_TS_PIN_CTRL,
> + AXP288_ADC_TS_PIN_GPADC);
> + if (ret) {
> + dev_err(&indio_dev->dev, "GPADC mode\n");
> + mutex_unlock(&indio_dev->mlock);
> + return ret;
You may even just goto the mutex_unlock at the end of the function. Would safe a few bytes here in the source - up to you. More interesting is, if the error message is required, as you don't have one below, when switching to TS_PIN_ON.
> + }
> + }
> + case IIO_CHAN_INFO_PROCESSED:
> + ret = regmap_bulk_read(info->regmap, chan->address, buf, 2);
> + if (ret) {
> + dev_err(&indio_dev->dev, "sample raw data failed\n");
> + break;
> + }
> + *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + if (mask == IIO_CHAN_INFO_RAW && chan->address == AXP288_GP_ADC_H)
> + ret = regmap_write(info->regmap, AXP288_ADC_TS_PIN_CTRL,
> + AXP288_ADC_TS_PIN_ON);
> +
> + mutex_unlock(&indio_dev->mlock);
> +
> + return ret;
> +}
> +
> +static int axp288_adc_enable(struct regmap *regmap, bool enable)
> +{
> + unsigned int pin_on, adc_en;
> +
> + if (enable) {
> + pin_on = AXP288_ADC_TS_PIN_ON;
> + adc_en = AXP288_ADC_EN_MASK;
> + } else {
> + pin_on = ~AXP288_ADC_TS_PIN_ON;
> + adc_en = ~AXP288_ADC_EN_MASK;
> + }
> + if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, pin_on))
> + return -EIO;
> +
> + return regmap_write(regmap, AXP20X_ADC_EN1, ~AXP288_ADC_EN_MASK);
So, what's the deal about the variable adc_en?
> +}
> +
> +static const struct iio_info axp288_adc_iio_info = {
> + .read_raw = &axp288_adc_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int axp288_adc_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct axp288_adc_info *info;
> + struct iio_dev *indio_dev;
> + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + info = iio_priv(indio_dev);
> + info->irq = platform_get_irq(pdev, 0);
> + if (info->irq < 0) {
> + dev_err(&pdev->dev, "no irq resource?\n");
> + return info->irq;
> + }
> + platform_set_drvdata(pdev, indio_dev);
> + info->regmap = axp20x->regmap;
> + ret = axp288_adc_enable(axp20x->regmap, true);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to enable ADC device\n");
> + return ret;
> + }
> +
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->name = pdev->name;
> + indio_dev->channels = axp288_adc_channels;
> + indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
> + indio_dev->info = &axp288_adc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
> + if (ret < 0)
> + goto err_disable_dev;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "unable to register iio device\n");
> + goto err_array_unregister;
> + }
> +
> + return 0;
> +
> +err_array_unregister:
> + iio_map_array_unregister(indio_dev);
> +err_disable_dev:
> + ret = axp288_adc_enable(axp20x->regmap, false);
Don't set ret here. We want to return the error code from the function that failed above.
> +
> + return ret;
> +}
> +
> +static int axp288_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> +
> + if (axp288_adc_enable(axp20x->regmap, false))
> + dev_err(&pdev->dev, "Unable to disable ADC device\n");
> + iio_device_unregister(indio_dev);
> + iio_map_array_unregister(indio_dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver axp288_adc_driver = {
> + .probe = axp288_adc_probe,
> + .remove = axp288_adc_remove,
> + .driver = {
> + .name = "axp288_adc",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(axp288_adc_driver);
> +
> +MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@...ux.intel.com>");
> +MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists