[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1411054070-25757-2-git-send-email-b.zolnierkie@samsung.com>
Date: Thu, 18 Sep 2014 17:27:18 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Eduardo Valentin <edubezval@...il.com>
Cc: Zhang Rui <rui.zhang@...el.com>,
Amit Daniel Kachhap <amit.daniel@...sung.com>,
Naveen Krishna Chatradhi <ch.naveen@...sung.com>,
Lukasz Majewski <l.majewski@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH 01/33] thermal: exynos: remove needless triminfo_data
abstraction
reg->triminfo_data is used only in exynos_tmu_initialize() and
the code has already different paths for Exynos5440 and other
SoC types (on which TRIMINFO_DATA register offset is identical)
so the register abstraction is not needed and can be removed.
There should be no functional changes caused by this patch.
Cc: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Cc: Amit Daniel Kachhap <amit.daniel@...sung.com>
Cc: Lukasz Majewski <l.majewski@...sung.com>
Cc: Eduardo Valentin <edubezval@...il.com>
Cc: Zhang Rui <rui.zhang@...el.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 10 +++++-----
drivers/thermal/samsung/exynos_tmu.h | 3 ---
drivers/thermal/samsung/exynos_tmu_data.c | 6 ------
3 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 092ab69..e0e1151 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -165,22 +165,22 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
switch (data->id) {
case 0:
trim_info = readl(data->base +
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+ EXYNOS5440_EFUSE_SWAP_OFFSET + EXYNOS5440_TMU_S0_7_TRIM);
break;
case 1:
- trim_info = readl(data->base + reg->triminfo_data);
+ trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
break;
case 2:
trim_info = readl(data->base -
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+ EXYNOS5440_EFUSE_SWAP_OFFSET + EXYNOS5440_TMU_S0_7_TRIM);
}
} else {
/* On exynos5420 the triminfo register is in the shared space */
if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
trim_info = readl(data->base_second +
- reg->triminfo_data);
+ EXYNOS_TMU_REG_TRIMINFO);
else
- trim_info = readl(data->base + reg->triminfo_data);
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index f67203b..de20dcc 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -76,7 +76,6 @@ enum soc_type {
* struct exynos_tmu_register - register descriptors to access registers and
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
- * @triminfo_data: register containing 2 pont trimming data
* @triminfo_ctrl: trim info controller register.
* @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
@@ -111,8 +110,6 @@ enum soc_type {
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
- u32 triminfo_data;
-
u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
u32 triminfo_ctrl_count;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 54d30bc..0f1f1f1 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -26,7 +26,6 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
@@ -86,7 +85,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
.triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
.triminfo_ctrl_count = 2,
@@ -173,7 +171,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
.triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
@@ -271,7 +268,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
@@ -354,7 +350,6 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
@@ -445,7 +440,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
- .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists