[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1411170651-28855-1-git-send-email-sboyd@codeaurora.org>
Date: Fri, 19 Sep 2014 16:50:50 -0700
From: Stephen Boyd <sboyd@...eaurora.org>
To: David Brown <davidb@...eaurora.org>,
Kumar Gala <galak@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 1/2] ARM: DT: msm8660: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
arch/arm/boot/dts/qcom-msm8660-surf.dts | 12 ++++++++
arch/arm/boot/dts/qcom-msm8660.dtsi | 51 +++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index ff7c53f58a06..e0883c376248 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -14,6 +14,18 @@
status = "ok";
};
};
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@...00000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@...80000 {
+ status = "okay";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index a3fd26b8139f..0affd6193f56 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -146,5 +147,55 @@
};
};
};
+
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc@...00000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
+
+ sdcc3: sdcc@...80000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
+ no-1-8-v;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
+ };
};
+
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists