| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAfyv352GrgTzKf-XxPNthtoR9rdhssnOSdx1mZ-q=D4okBSAA@mail.gmail.com>
Date: Mon, 22 Sep 2014 22:35:03 +0200
From: Belisko Marek <marek.belisko@...il.com>
To: Mark Rutland <mark.rutland@....com>
Cc: "robh+dt@...nel.org" <robh+dt@...nel.org>,
Pawel Moll <Pawel.Moll@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"rob@...dley.net" <rob@...dley.net>,
"dbaryshkov@...il.com" <dbaryshkov@...il.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"grant.likely@...aro.org" <grant.likely@...aro.org>,
"hns@...delico.com" <hns@...delico.com>,
"sre@...ian.org" <sre@...ian.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] Documentation: DT: Document twl4030-madc-battery bindings.
Hi Mark,
On Mon, Sep 22, 2014 at 1:03 PM, Mark Rutland <mark.rutland@....com> wrote:
> Hi,
>
> On Wed, Mar 05, 2014 at 08:52:19PM +0000, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko <marek@...delico.com>
>> ---
>> .../bindings/power_supply/twl4030_madc_battery.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
>>
>> diff --git a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
>> new file mode 100644
>> index 0000000..fd0b6d2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
>> @@ -0,0 +1,43 @@
>> +twl4030_madc_battery
>> +
>> +Required properties:
>> + - compatible : "ti,twl4030-madc-battery"
>
> I'm rather confused by this; the code seems to have stripped away all
> the twl4030 dependencies and this now seems to be a generic ADC battery
> status driver. So why does this need to be specific to twl4030?
You are right. Also possibly driver name is incorrect :). Better name could be
ti, madc-battery.
>
>> + - capacity : battery capacity in uAh
>
> I would make the units explicit in the name; "capacity" can be measured
> in many ways.
OK capacity_uAh should be fine I believe.
>
>> + - charging-calibration-data : list of voltage(mV):level(%) values
>> + for charging calibration (see example)
>> + - discharging-calibration-data : list of voltage(mV):level(%) values
>> + for discharging calibration (see example)
>
> Regardless of the prefixing of these property names, the specifics are
> unclear to me.
Do you suggest to rename it completely or is enough to add "ti, " prefix?
>
> Does this apply to vbat?
Yes bat is read and then interpolation algorithm is applied for
various power properties.
So mapping from voltage to percentage is defined in table.
>
> Is vbat guaranteed to read in mV?
Yes.
>
> Is any particular order required? The example seems to go be in
> descending percentage values.
There is done sorting in driver so ordering it's not necessary.
>
> Is any particular interpolation expected on behalf of the OS, or is this
> just an informative set of measurements that hte OS can use as it sees
> fit?
>
>> + - io-channels: Should contain IIO channel specifiers
>> + for each element in io-channel-names.
>> +- io-channel-names: Should contain the following values:
All 3 statements was copied from rx51-battery and documentation is the same.
There is not unit for all channels just raw values which are then
converted in driver.
>> + * "temp" - The ADC channel for temperature reading
>
> Which units? Where is this used?
>
>> + * "ichg" - The ADC channel for battery charging status
>
> How exactly is this used to detect the charging status?
>
>> + * "vbat" - The ADC channel to measure the battery voltage
>> +
>> +Example:
>> + madc-battery {
>> + compatible = "ti,twl4030-madc-battery";
>> + capacity = <1200000>;
>> + charging-calibration-data = <4200 100
>> + 4100 75
>> + 4000 55
>> + 3900 25
>> + 3800 5
>> + 3700 2
>> + 3600 1
>> + 3300 0>;
>
> Please bracket list entries individually (as you've done with
> io-channels).
OK.
>
> Thanks,
> Mark.
>
>> +
>> + discharging-calibration-data = <4200 100
>> + 4100 95
>> + 4000 70
>> + 3800 50
>> + 3700 10
>> + 3600 5
>> + 3300 0>;
>> + io-channels = <&twl_madc 1>,
>> + <&twl_madc 10>,
>> + <&twl_madc 12>;
>> + io-channel-names = "temp",
>> + "ichg",
>> + "vbat";
>> + };
>> --
>> 1.8.3.2
>>
>>
Thanks,
Marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists