| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1411463719-7728-1-git-send-email-jingchang.lu@freescale.com>
Date: Tue, 23 Sep 2014 17:15:19 +0800
From: Jingchang Lu <jingchang.lu@...escale.com>
To: <vinod.koul@...el.com>
CC: <dmaengine@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Jingchang Lu <jingchang.lu@...escale.com>
Subject: [PATCH] dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
The offset of all 8-/16-bit register in big-endian eDMA model are
swapped in a 32-bit size opposite those in the little-endian model.
The hardware Scatter/Gather requires the subsequent TCDs in memory
to be auto loaded should retain the same endian as the core independent
of the register endian model, the dma engine will do the swap if need.
Signed-off-by: Jingchang Lu <jingchang.lu@...escale.com>
---
drivers/dma/fsl-edma.c | 104 +++++++++++++++++++++++++++++++------------------
1 file changed, 66 insertions(+), 38 deletions(-)
diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index 3c5711d..499af8f 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -177,14 +177,20 @@ struct fsl_edma_engine {
/*
* R/W functions for big- or little-endian registers
* the eDMA controller's endian is independent of the CPU core's endian.
+ * for the big-endian IP module, the offset for 8-bit or 16-bit register
+ * should also be swapped oposite to that in little-endian IP.
*/
static u16 edma_readw(struct fsl_edma_engine *edma, void __iomem *addr)
{
- if (edma->big_endian)
- return ioread16be(addr);
- else
+ u32 dst;
+ /* swap the reg offset for these in big-endian mode */
+ if (edma->big_endian) {
+ dst = ((u32)addr & ~0x3) | (((u32)addr & 0x3) ^ 0x2);
+ return ioread16be((void __iomem *)dst);
+ } else {
return ioread16(addr);
+ }
}
static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
@@ -197,15 +203,26 @@ static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
{
- iowrite8(val, addr);
+ u32 dst;
+ /* swap the reg offset for these in big-endian mode */
+ if (edma->big_endian) {
+ dst = ((u32)addr & ~0x3) | (((u32)addr & 0x3) ^ 0x3);
+ iowrite8(val, (void __iomem *)dst);
+ } else {
+ iowrite8(val, addr);
+ }
}
static void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
{
- if (edma->big_endian)
- iowrite16be(val, addr);
- else
+ u32 dst;
+ /* swap the reg offset for these in big-endian mode */
+ if (edma->big_endian) {
+ dst = ((u32)addr & ~0x3) | (((u32)addr & 0x3) ^ 0x2);
+ iowrite16be(val, (void __iomem *)dst);
+ } else {
iowrite16(val, addr);
+ }
}
static void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr)
@@ -256,11 +273,10 @@ static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
if (enable)
- edma_writeb(fsl_chan->edma,
- EDMAMUX_CHCFG_ENBL | EDMAMUX_CHCFG_SOURCE(slot),
+ writeb(EDMAMUX_CHCFG_ENBL | EDMAMUX_CHCFG_SOURCE(slot),
muxaddr + ch_off);
else
- edma_writeb(fsl_chan->edma, EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
+ writeb(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
}
static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
@@ -433,21 +449,26 @@ static void fsl_edma_set_tcd_params(struct fsl_edma_chan *fsl_chan,
u32 ch = fsl_chan->vchan.chan.chan_id;
/*
- * TCD parameters have been swapped in fill_tcd_params(),
- * so just write them to registers in the cpu endian here
+ * TCD parameters should be swapped according the eDMA
+ * engine requirement.
*/
- writew(0, addr + EDMA_TCD_CSR(ch));
- writel(src, addr + EDMA_TCD_SADDR(ch));
- writel(dst, addr + EDMA_TCD_DADDR(ch));
- writew(attr, addr + EDMA_TCD_ATTR(ch));
- writew(soff, addr + EDMA_TCD_SOFF(ch));
- writel(nbytes, addr + EDMA_TCD_NBYTES(ch));
- writel(slast, addr + EDMA_TCD_SLAST(ch));
- writew(citer, addr + EDMA_TCD_CITER(ch));
- writew(biter, addr + EDMA_TCD_BITER(ch));
- writew(doff, addr + EDMA_TCD_DOFF(ch));
- writel(dlast_sga, addr + EDMA_TCD_DLAST_SGA(ch));
- writew(csr, addr + EDMA_TCD_CSR(ch));
+ edma_writew(fsl_chan->edma, 0, addr + EDMA_TCD_CSR(ch));
+ edma_writel(fsl_chan->edma, src, addr + EDMA_TCD_SADDR(ch));
+ edma_writel(fsl_chan->edma, dst, addr + EDMA_TCD_DADDR(ch));
+
+ edma_writew(fsl_chan->edma, attr, addr + EDMA_TCD_ATTR(ch));
+ edma_writew(fsl_chan->edma, soff, addr + EDMA_TCD_SOFF(ch));
+
+ edma_writel(fsl_chan->edma, nbytes, addr + EDMA_TCD_NBYTES(ch));
+ edma_writel(fsl_chan->edma, slast, addr + EDMA_TCD_SLAST(ch));
+
+ edma_writew(fsl_chan->edma, citer, addr + EDMA_TCD_CITER(ch));
+ edma_writew(fsl_chan->edma, biter, addr + EDMA_TCD_BITER(ch));
+ edma_writew(fsl_chan->edma, doff, addr + EDMA_TCD_DOFF(ch));
+
+ edma_writel(fsl_chan->edma, dlast_sga, addr + EDMA_TCD_DLAST_SGA(ch));
+
+ edma_writew(fsl_chan->edma, csr, addr + EDMA_TCD_CSR(ch));
}
static void fill_tcd_params(struct fsl_edma_engine *edma,
@@ -459,20 +480,27 @@ static void fill_tcd_params(struct fsl_edma_engine *edma,
u16 csr = 0;
/*
- * eDMA hardware SGs require the TCD parameters stored in memory
- * the same endian as the eDMA module so that they can be loaded
- * automatically by the engine
+ * eDMA hardware SGs requires the TCDs to be auto loaded
+ * in the same endian as the core whenver the eDAM engine's
+ * register endian. So we don't swap the value, waitting
+ * for fsl_set_tcd_params doing the swap.
*/
- edma_writel(edma, src, &(tcd->saddr));
- edma_writel(edma, dst, &(tcd->daddr));
- edma_writew(edma, attr, &(tcd->attr));
- edma_writew(edma, EDMA_TCD_SOFF_SOFF(soff), &(tcd->soff));
- edma_writel(edma, EDMA_TCD_NBYTES_NBYTES(nbytes), &(tcd->nbytes));
- edma_writel(edma, EDMA_TCD_SLAST_SLAST(slast), &(tcd->slast));
- edma_writew(edma, EDMA_TCD_CITER_CITER(citer), &(tcd->citer));
- edma_writew(edma, EDMA_TCD_DOFF_DOFF(doff), &(tcd->doff));
- edma_writel(edma, EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga), &(tcd->dlast_sga));
- edma_writew(edma, EDMA_TCD_BITER_BITER(biter), &(tcd->biter));
+ writel(src, &(tcd->saddr));
+ writel(dst, &(tcd->daddr));
+
+ writew(attr, &(tcd->attr));
+
+ writew(EDMA_TCD_SOFF_SOFF(soff), &(tcd->soff));
+
+ writel(EDMA_TCD_NBYTES_NBYTES(nbytes), &(tcd->nbytes));
+ writel(EDMA_TCD_SLAST_SLAST(slast), &(tcd->slast));
+
+ writew(EDMA_TCD_CITER_CITER(citer), &(tcd->citer));
+ writew(EDMA_TCD_DOFF_DOFF(doff), &(tcd->doff));
+
+ writel(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga), &(tcd->dlast_sga));
+
+ writew(EDMA_TCD_BITER_BITER(biter), &(tcd->biter));
if (major_int)
csr |= EDMA_TCD_CSR_INT_MAJOR;
@@ -482,7 +510,7 @@ static void fill_tcd_params(struct fsl_edma_engine *edma,
if (enable_sg)
csr |= EDMA_TCD_CSR_E_SG;
- edma_writew(edma, csr, &(tcd->csr));
+ writew(csr, &(tcd->csr));
}
static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists