| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140923161041.GA2147@localhost.localdomain>
Date: Wed, 24 Sep 2014 00:10:44 +0800
From: Huang Shijie <shijie8@...il.com>
To: Boris BREZILLON <boris.brezillon@...e-electrons.com>
Cc: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Mike Voytovich <mvoytovich@...pal.com>,
Roy Lee <roylee@...pal.com>
Subject: Re: [PATCH v3 2/3] mtd: nand: gpmi: add proper raw access support
On Tue, Sep 23, 2014 at 04:07:35PM +0200, Boris BREZILLON wrote:
> Several MTD users (either in user or kernel space) expect a valid raw
> access support to NAND chip devices.
> This is particularly true for testing tools which are often touching the
> data stored in a NAND chip in raw mode to artificially generate errors.
>
> The GPMI drivers do not implemenent raw access functions, and thus rely on
> default HW_ECC scheme implementation.
> The default implementation consider the data and OOB area as properly
> separated in their respective NAND section, which is not true for the GPMI
> controller.
> In this driver/controller some OOB data are stored at the beginning of the
> NAND data area (these data are called metadata in the driver), then ECC
> bytes are interleaved with data chunk (which is similar to the
> HW_ECC_SYNDROME scheme), and eventually the remaining bytes are used as
> OOB data.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> ---
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 126 +++++++++++++++++++++++++++++++++
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 +
> 2 files changed, 128 insertions(+)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 959cb9b..7921ba7 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -791,6 +791,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
> this->page_buffer_phys);
> kfree(this->cmd_buffer);
> kfree(this->data_buffer_dma);
> + kfree(this->raw_buffer);
>
> this->cmd_buffer = NULL;
> this->data_buffer_dma = NULL;
> @@ -837,6 +838,9 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
> if (!this->page_buffer_virt)
> goto error_alloc;
>
> + this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
> + if (!this->raw_buffer)
> + goto error_alloc;
>
> /* Slice up the page buffer. */
> this->payload_virt = this->page_buffer_virt;
> @@ -1347,6 +1351,126 @@ gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
> return status & NAND_STATUS_FAIL ? -EIO : 0;
> }
>
> +static int gpmi_ecc_read_page_raw(struct mtd_info *mtd,
> + struct nand_chip *chip, uint8_t *buf,
> + int oob_required, int page)
In actually, i suggest to call the ecc->read_page() in this
hook. And after the ecc->read_page(), copy the relative data to
the relative buffers. Is my suggestion right? please correct me.
> +{
> + struct gpmi_nand_data *this = chip->priv;
> + struct bch_geometry *nfc_geo = &this->bch_geometry;
> + int eccsize = nfc_geo->ecc_chunk_size;
> + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
> + u8 *tmp_buf = this->raw_buffer;
> + size_t src_bit_off;
> + size_t oob_bit_off;
> + size_t oob_byte_off;
> + uint8_t *oob = chip->oob_poi;
> + int step;
> +
> + chip->read_buf(mtd, tmp_buf,
> + mtd->writesize + mtd->oobsize);
> +
> + if (this->swap_block_mark) {
> + u8 swap = tmp_buf[0];
> +
> + tmp_buf[0] = tmp_buf[mtd->writesize];
> + tmp_buf[mtd->writesize] = swap;
> + }
> +
> + if (oob_required)
> + memcpy(oob, tmp_buf, nfc_geo->metadata_size);
> +
> + oob_bit_off = nfc_geo->metadata_size * 8;
> + src_bit_off = oob_bit_off;
> +
> + for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
> + if (buf)
> + gpmi_move_bits(buf, step * eccsize * 8,
> + tmp_buf, src_bit_off,
> + eccsize * 8);
> + src_bit_off += eccsize * 8;
> +
> + if (oob_required)
> + gpmi_move_bits(oob, oob_bit_off,
> + tmp_buf, src_bit_off,
> + eccbits);
> +
> + src_bit_off += eccbits;
> + oob_bit_off += eccbits;
> + }
> +
> + if (oob_required && oob_bit_off % 8)
> + oob[oob_bit_off / 8] &= GENMASK(oob_bit_off - 1, 0);
> +
> + oob_byte_off = DIV_ROUND_UP(oob_bit_off, 8);
> +
> + if (oob_required && oob_byte_off < mtd->oobsize)
> + memcpy(oob + oob_byte_off,
> + tmp_buf + mtd->writesize + oob_byte_off,
> + mtd->oobsize - oob_byte_off);
> +
> + return 0;
> +}
> +
> +static int gpmi_ecc_write_page_raw(struct mtd_info *mtd,
> + struct nand_chip *chip,
> + const uint8_t *buf,
> + int oob_required)
> +{
give me more time to think over this hook :(
sorry.
thanks
Huang Shijie
> + struct gpmi_nand_data *this = chip->priv;
> + struct bch_geometry *nfc_geo = &this->bch_geometry;
> + int eccsize = nfc_geo->ecc_chunk_size;
> + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
> + u8 *tmp_buf = this->raw_buffer;
> + uint8_t *oob = chip->oob_poi;
> + size_t dst_bit_off;
> + size_t oob_bit_off;
> + size_t oob_byte_off;
> + int step;
> +
> + if (!buf || !oob_required)
> + memset(tmp_buf, 0xff, mtd->writesize + mtd->oobsize);
> +
> + memcpy(tmp_buf, oob, nfc_geo->metadata_size);
> + oob_bit_off = nfc_geo->metadata_size * 8;
> + dst_bit_off = oob_bit_off;
> +
> + for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
> + if (buf)
> + gpmi_move_bits(tmp_buf, dst_bit_off,
> + buf, step * eccsize * 8, eccsize * 8);
> + dst_bit_off += eccsize * 8;
> +
> + /* Pad last ECC block to align following data on a byte */
> + if (step == nfc_geo->ecc_chunk_count - 1 &&
> + (oob_bit_off + eccbits) % 8)
> + eccbits += 8 - ((oob_bit_off + eccbits) % 8);
> +
> + if (oob_required)
> + gpmi_move_bits(tmp_buf, dst_bit_off,
> + oob, oob_bit_off, eccbits);
> +
> + dst_bit_off += eccbits;
> + oob_bit_off += eccbits;
> + }
> +
> + oob_byte_off = oob_bit_off / 8;
> +
> + if (oob_required && oob_byte_off < mtd->oobsize)
> + memcpy(tmp_buf + mtd->writesize + oob_byte_off,
> + oob + oob_byte_off, mtd->oobsize - oob_byte_off);
> +
> + if (this->swap_block_mark) {
> + u8 swap = tmp_buf[0];
> +
> + tmp_buf[0] = tmp_buf[mtd->writesize];
> + tmp_buf[mtd->writesize] = swap;
> + }
> +
> + chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize);
> +
> + return 0;
> +}
> +
> static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
> {
> struct nand_chip *chip = mtd->priv;
> @@ -1664,6 +1788,8 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
> ecc->write_page = gpmi_ecc_write_page;
> ecc->read_oob = gpmi_ecc_read_oob;
> ecc->write_oob = gpmi_ecc_write_oob;
> + ecc->read_page_raw = gpmi_ecc_read_page_raw;
> + ecc->write_page_raw = gpmi_ecc_write_page_raw;
> ecc->mode = NAND_ECC_HW;
> ecc->size = bch_geo->ecc_chunk_size;
> ecc->strength = bch_geo->ecc_strength;
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index 17d0736..89ab5c8 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -189,6 +189,8 @@ struct gpmi_nand_data {
> void *auxiliary_virt;
> dma_addr_t auxiliary_phys;
>
> + void *raw_buffer;
> +
> /* DMA channels */
> #define DMA_CHANS 8
> struct dma_chan *dma_chans[DMA_CHANS];
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists