[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <bb68d2360314158cd8ccb9c6794877c3bb45d72e.1411492954.git.stefan@agner.ch>
Date: Tue, 23 Sep 2014 19:37:54 +0200
From: Stefan Agner <stefan@...er.ch>
To: linus.walleij@...aro.org, gnurou@...il.com,
shawn.guo@...escale.com, kernel@...gutronix.de
Cc: linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, bpringlemeir@...ps.com,
stefan@...er.ch
Subject: [PATCH v2 2/5] pinctrl: imx: add gpio pinmux support for vf610
Add pinmux support for GPIO for Vybrid (vf610) IOMUX controller.
This is needed since direction configuration is not part of the
GPIO module in Vybrid.
Signed-off-by: Stefan Agner <stefan@...er.ch>
---
drivers/pinctrl/pinctrl-imx.c | 54 +++++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-imx.h | 1 +
drivers/pinctrl/pinctrl-vf610.c | 2 +-
3 files changed, 56 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index 0d4558b..64d1b59 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -294,10 +294,59 @@ static int imx_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
+static int imx_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg;
+ u32 reg;
+
+ if (!(info->flags & GPIO_CONTROL))
+ return -EINVAL;
+
+ pin_reg = &info->pin_regs[offset];
+ if (pin_reg->mux_reg == -1)
+ return -EINVAL;
+
+ reg = readl(ipctl->base + pin_reg->mux_reg);
+ reg &= ~(0x7 << 20);
+ writel(reg, ipctl->base + pin_reg->mux_reg);
+
+ return 0;
+}
+
+static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg;
+ u32 reg;
+
+ if (!(info->flags & GPIO_CONTROL))
+ return -EINVAL;
+
+ pin_reg = &info->pin_regs[offset];
+ if (pin_reg->mux_reg == -1)
+ return -EINVAL;
+
+ reg = readl(ipctl->base + pin_reg->mux_reg);
+ if (input)
+ reg &= ~0x2;
+ else
+ reg |= 0x2;
+ writel(reg, ipctl->base + pin_reg->mux_reg);
+
+ return 0;
+}
+
static const struct pinmux_ops imx_pmx_ops = {
.get_functions_count = imx_pmx_get_funcs_count,
.get_function_name = imx_pmx_get_func_name,
.get_function_groups = imx_pmx_get_groups,
+ .gpio_request_enable = imx_pmx_gpio_request_enable,
+ .gpio_set_direction = imx_pmx_gpio_set_direction,
.enable = imx_pmx_enable,
};
@@ -579,6 +628,11 @@ int imx_pinctrl_probe(struct platform_device *pdev,
dev_err(&pdev->dev, "wrong pinctrl info\n");
return -EINVAL;
}
+
+ /* GPIO control functions only intended for shared mux/conf register */
+ if (info->flags & GPIO_CONTROL)
+ BUG_ON(!(info->flags & SHARE_MUX_CONF_REG));
+
info->dev = &pdev->dev;
/* Create state holders etc for this driver */
diff --git a/drivers/pinctrl/pinctrl-imx.h b/drivers/pinctrl/pinctrl-imx.h
index 49e55d3..8f37ca4 100644
--- a/drivers/pinctrl/pinctrl-imx.h
+++ b/drivers/pinctrl/pinctrl-imx.h
@@ -84,6 +84,7 @@ struct imx_pinctrl_soc_info {
};
#define SHARE_MUX_CONF_REG 0x1
+#define GPIO_CONTROL 0x2
#define NO_MUX 0x0
#define NO_PAD 0x0
diff --git a/drivers/pinctrl/pinctrl-vf610.c b/drivers/pinctrl/pinctrl-vf610.c
index b788e15..fdf5661 100644
--- a/drivers/pinctrl/pinctrl-vf610.c
+++ b/drivers/pinctrl/pinctrl-vf610.c
@@ -299,7 +299,7 @@ static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = {
static struct imx_pinctrl_soc_info vf610_pinctrl_info = {
.pins = vf610_pinctrl_pads,
.npins = ARRAY_SIZE(vf610_pinctrl_pads),
- .flags = SHARE_MUX_CONF_REG,
+ .flags = SHARE_MUX_CONF_REG | GPIO_CONTROL,
};
static struct of_device_id vf610_pinctrl_of_match[] = {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists