[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5422C387.9050005@rock-chips.com>
Date: Wed, 24 Sep 2014 21:13:43 +0800
From: Kever Yang <kever.yang@...k-chips.com>
To: Heiko Stübner <heiko@...ech.de>,
"jinkun.hong" <jinkun.hong@...k-chips.com>
CC: Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org,
Russell King <linux@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Randy Dunlap <rdunlap@...radead.org>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>,
Wang Caesar <caesar.wang@...k-chips.com>,
Kumar Gala <galak@...eaurora.org>,
Grant Likely <grant.likely@...aro.org>,
Jack Dai <jack.dai@...k-chips.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 3/3] ARM: dts: add rk3288 power-domain node
Heiko,
On 09/24/2014 01:52 AM, Heiko Stübner wrote:
> Am Montag, 22. September 2014, 19:55:16 schrieb jinkun.hong:
>> From: "jinkun.hong" <jinkun.hong@...k-chips.com>
>>
>> Signed-off-by: Jack Dai <jack.dai@...k-chips.com>
>> Signed-off-by: Wang Caesar <caesar.wang@...k-chips.com>
>> Signed-off-by: jinkun.hong <jinkun.hong@...k-chips.com>
>>
>> ---
>>
>> arch/arm/boot/dts/rk3288.dtsi | 45
>> +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 3bb5230..714b9d9 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -15,6 +15,7 @@
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/pinctrl/rockchip.h>
>> #include <dt-bindings/clock/rk3288-cru.h>
>> +#include <dt-bindings/power-domain/rk3288.h>
>> #include "skeleton.dtsi"
>>
>> / {
>> @@ -467,6 +468,50 @@
>> compatible = "rockchip,rk3288-pmu", "syscon";
>> reg = <0xff730000 0x100>;
>> };
> missing blank line here
>
> Also please mind the ordering. We have the nodes without registers (like the
> pinctrl) at the bottom, so maybe add the power-controller alphabetically after
> the pinctrl node.
>
>> + power: power-controller {
>> + compatible = "rockchip,rk3288-power-controller";
>> + #power-domain-cells = <1>;
>> + rockchip,pmu = <&pmu>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pd_gpu {
>> + reg = <RK3288_PD_GPU>;
>> + clocks = <&cru ACLK_GPU>;
>> + };
>> +
>> + pd_vio {
>> + reg = <RK3288_PD_VIO>;
>> + clocks = <&cru HCLK_RGA>, <&cru HCLK_VOP0>,
>> + <&cru HCLK_VOP1>, <&cru HCLK_VIO_AHB_ARBI>,
>> + <&cru HCLK_VIO_NIU>, <&cru HCLK_VIP>,
>> + <&cru HCLK_IEP>, <&cru HCLK_ISP>,
>> + <&cru HCLK_VIO2_H2P>, <&cru PCLK_MIPI_DSI0>,
>> + <&cru PCLK_MIPI_DSI1>, <&cru PCLK_MIPI_CSI>,
>> + <&cru PCLK_LVDS_PHY>, <&cru PCLK_EDP_CTRL>,
>> + <&cru PCLK_HDMI_CTRL>, <&cru PCLK_VIO2_H2P>,
>> + <&cru ACLK_VOP0>, <&cru ACLK_IEP>,
>> + <&cru ACLK_VIO0_NIU>, <&cru ACLK_VIP>,
>> + <&cru ACLK_VOP1>, <&cru ACLK_ISP>,
>> + <&cru ACLK_VIO1_NIU>, <&cru ACLK_RGA>,
>> + <&cru ACLK_RGA_NIU>,<&cru SCLK_RGA>,
>> + <&cru DCLK_VOP0>, <&cru DCLK_VOP1>,
>> + <&cru SCLK_EDP_24M>, <&cru SCLK_EDP>,
>> + <&cru SCLK_ISP>, <&cru SCLK_ISP_JPE>,
>> + <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
>> + };
>> +
>> + pd_video {
>> + reg = <RK3288_PD_VIDEO>;
>> + /* FIXME: add clocks */
> what is missing for these clocks? If it's just more clock ids, please
> corrdinate with Kever
The clock tree in PD_VIDEO is not complete, maybe because the
MUX which should be set from GRF_SOC_CON0[7].
I will handle this in my patch.
BR
-Kever
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists